Summary:
This diff changes the RPC layer to directly return `TResponse` to the user when
issuing a `Call<...>` RPC call. The call throws an exception on failure
(instead of the previous return `nullopt`).
All servers (network, RPC and distributed) are set to have explicit `Shutdown`
methods so that a controlled shutdown can always be performed. The object
destructors now have `CHECK`s to enforce that the `AwaitShutdown` methods were
called.
The distributed memgraph is changed that none of the binaries (master/workers)
crash when there is a communication failure. Instead, the whole cluster starts
a graceful shutdown when a persistent communication error is detected.
Transient errors are allowed during execution. The transaction that errored out
will be aborted on the whole cluster. The cluster state is managed using a new
Heartbeat RPC call.
Reviewers: buda, teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1604
Summary:
With this diff we should be able to support dynamic worker addition.
This is ofcourse a minimal effort maximal impact approach.
This diff introduces new RPC calls when a worker registers.
The `DynamicWorkerAddition` doesn't use `GraphDbAccessor` to get indices because
they create WAL entries.
Reviewers: vkasljevic, ipaljak, buda
Reviewed By: ipaljak
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1594
Summary:
In a bunch of places `TypedValue` was used where `PropertyValue` should be. A lot of times it was only because `TypedValue` serialization code could be reused for `PropertyValue`, only without providing callbacks for `VERTEX`, `EDGE` and `PATH`. So first I wrote separate serialization code for `PropertyValue` and put it into storage folder. Then I fixed all the places where `TypedValue` was incorrectly used instead of `PropertyValue`. I also disabled implicit `TypedValue` to `PropertyValue` conversion in hopes of preventing misuse in the future.
After that, I wrote code for `VertexAccessor` and `EdgeAccessor` serialization and put it into `storage` folder because it was almost duplicated in distributed BFS and pull produce RPC messages. On the sender side, some subset of records (old or new or both) is serialized, and on the reciever side, records are deserialized and immediately put into transaction cache.
Then I rewrote the `TypedValue` serialization functions (`SaveCapnpTypedValue` and `LoadCapnpTypedValue`) to not take callbacks for `VERTEX`, `EDGE` and `PATH`, but use accessor serialization functions instead. That means that any code that wants to use `TypedValue` serialization must hold a reference to `GraphDbAccessor` and `DataManager`, so that should make clients reconsider if they really want to use `TypedValue` instead of `PropertyValue`.
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1598
Summary:
This change introduces a pure virtual initial implementation of the transaction
engine which is then implemented in two versions: single node and distributed.
The interface classes now have the following hierarchy:
```
Engine (pure interface)
|
+----+---------- EngineDistributed (common logic)
| |
EngineSingleNode +-------+--------+
| |
EngineMaster EngineWorker
```
In addition to this layout the `EngineMaster` uses `EngineSingleNode` as its
underlying storage engine and only changes the necessary functions to make
them work with the `EngineWorker`.
After this change I recommend that you delete the following leftover files:
```
rm src/distributed/transactional_cache_cleaner_rpc_messages.*
rm src/transactions/common.*
rm src/transactions/engine_rpc_messages.*
```
Reviewers: teon.banek, msantl, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1589
Summary:
This change improves detection of errorneous situations when starting a
distributed cluster on a single machine. It asserts that the user hasn't
started more memgraph nodes on the same machine with the same durability
directory. Also, this diff improves worker registration. Now workers don't have
to have explicitly set IP addresses. The master will deduce them from the
connecting IP when the worker registers.
Reviewers: teon.banek, buda, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1582
Summary: Recovery file is version inconsistent iff it starts with a correct magic number, has at least one integer written after that and that integer differs from kVersion.
Reviewers: mferencevic, ipaljak, vkasljevic, buda
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1565
Summary:
This diff introduces a new flags
* `--synchronous-commit`
The `--synchronous-commit` tells the WAL when should the deltas be flushed to
the disk drive. By default this is off and the WAL flushes deltas every `N`
milliseconds. If it's turned on, on every transaction end, commit or abort, the
WAL will first flush the deltas and only after that will return from ending a
transaction.
Reviewers: buda, vkasljevic, mferencevic, teon.banek, ipaljak
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1542
Summary: A quick clean-up of user visible error messages. Tried to make them gramatically correct by capitalizing the first word in the sentence and putting a dot at the end.
Reviewers: teon.banek, buda, ipaljak
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1571
Summary:
Changed GRANT ROLE to SET ROLE. Now it is `SET ROLE FOR user TO ROLE` instead of `GRANT ROLE role TO user`. It makes more sense because our users can only have 1 role.
Changed REVOKE ROLE to CLEAR ROLE. Now it is `CLEAR ROLE FOR user` instead of `REVOKE ROLE role FOR user`. REVOKE ROLE would throw exception if user was not a member of role. CLEAR ROLE clears the role whatever it is. I find that the latter makes more sense combined with SET ROLE.
Changed `SHOW ROLE FOR USER user` to `SHOW ROLE FOR user`.
Changed `SHOW USERS FOR ROLE role` to `SHOW USERS FOR role`.
Reviewers: mferencevic, teon.banek, buda
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1572
Summary:
Visitor pattern's main issue is cyclical dependency between classes that
are visited and the visitor instance itself. We need to decouple this
dependency if we want to open source part of the code, namely
non-distributed part. This decoupling is achieved through the use of
`dynamic_cast` in distributed operators. Hopefully the solution is good
enough and doesn't cause performance issues. An alternative solution is
to build our own custom double dispatch solution, but that will
basically boil down to our implementation of runtime type information
and casts.
Note, this only decouples the distributed operators. If and when we
decide that other operators shouldn't be open sourced, the same
`dynamic_cast` pattern should be applied in them also.
Depends on D1563
Reviewers: mtomic, msantl, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1566
Summary:
This is the first step in separating the implementation of distributed
features in operators. Following steps are:
* decoupling distributed visitors
* injecting distributed details in operator state
* minor cleanup or anything else that was overlooked
Reviewers: mtomic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1563
Summary:
We want to make sure that index doesn't miss any results.
This test inserts vertices in the db and checks that the number of inserted
vertices is the same as the number of results from a scan all and a scan all by
label property.
https://app.asana.com/0/478665099752750/762723827276182/f
Reviewers: ipaljak, vkasljevic, teon.banek
Reviewed By: ipaljak
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1558
Summary:
Since we switched to Cap'n Proto serialization there's no need for
keeping boost around anymore.
Reviewers: mtomic, mferencevic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1515
Summary:
The raft implementation has been stale for a while now. It doesn't
compile, nor uses Cap'n Proto for serialization. In the future we would
probably rewrite it, so it doesn't need to be part of the repo at this
moment.
Reviewers: mferencevic, mtomic, buda
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1513
Summary: first step for a cleaner query front end that might be easier to open source
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1511
Summary:
GraphDbAccessor is now constructed only through GraphDb. This allows the
concrete GraphDb to instantiate a concrete GraphDbAccessor. This allows
us to use virtual calls, so that the implementation may be kept
separate. The major downside of doing things this way is heap allocation
of GraphDbAccessor. In case it turns out to be a real performance
issues, another solution with pointer to static implementation may be
used.
InsertVertexIntoRemote is now a non-member function, which reduces
coupling. It made no sense for it to be member function because it used
only the public parts of GraphDbAccessor.
Reviewers: msantl, mtomic, mferencevic
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1504
Summary:
This change, hopefully, simplifies the implementation of different kinds
of GraphDb. The pimpl idiom is now simplified by removing all of the
crazy inheritance. Implementations classes are just plain data stores,
without any methods. The interface classes now have a more flat
hierarchy:
```
GraphDb (pure interface)
|
+----+---------- DistributedGraphDb (pure interface)
| |
Single Node +-----+------+
| |
Master Worker
```
DistributedGraphDb is used as an intermediate interface for all the
things that should work only in distributed. Therefore, virtual calls
for distributed stuff have been removed from GraphDb. Some are exposed
via DistributedGraphDb, other's are only in concrete Master and Worker
classes. The code which relied on those virtual calls has been
refactored to either use DistributedGraphDb, take a pointer to what is
actually needed or use dynamic_cast. Obviously, dynamic_cast is a
temporary solution and should be replaced with another mechanism (e.g.
virtual call, or some other function pointer style).
The cost of the above change is some code duplication in constructors
and destructors of classes. This duplication has a lot of little tweaks
that make it hard to generalize, not to mention that virtual calls do
not work in constructor and destructor. If we really care about
generalizing this, we should think about abandoning RAII in favor of
constructor + Init method.
The next steps for splitting the dependencies that seem logical are:
1) Split GraphDbAccessor implementation, either via inheritance or
passing in an implementation pointer. GraphDbAccessor should then
only be created by a virtual call on GraphDb.
2) Split Interpreter implementation. Besides allowing single node
interpreter to exist without depending on distributed, this will
enable the planner and operators to be correctly separated.
Reviewers: msantl, mferencevic, ipaljak
Reviewed By: msantl
Subscribers: dgleich, pullbot
Differential Revision: https://phabricator.memgraph.io/D1493
Summary: This is a simple thing that enables us to use keywords as symbolic names. A bad thing is that planning will be done for queries which differ only in keyword case (e.g. "MATCH (x) RETURN x" and "match (x) return x"), but that should not be a significant performance impact as queries are done programmaticaly when high throughput is expected and we don't expect letter case change in that case.
Reviewers: buda, mferencevic, teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1496
Summary:
Previously, our implementation of the Bolt protocol buffered all results in
memory before sending them out to the client. This implementation immediately
streams the results to the client to avoid any memory allocations. Also, this
implementation splits the interpretation and pulling logic into two.
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1495
Summary:
This change should completely support planning Optional for distributed
execution. Cartesian matching is handled, as well as dependencies
between optional branch and the main input branch.
Unit tests are expanded to cover the planning algorithm.
Reviewers: msantl, mtomic
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1480
Summary:
During the creation of indexes there could be a case in which a vertex contains a label/property but is not a part of index after
index building completes.
This happens if vertices are being inserted while the index is being built.
Reviewers: buda, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1484
Summary:
Session specifics have been move out of the Bolt `executing` state, and
are accessed via pure virtual Session type. Our server is templated on
the session and we are setting the concrete type, so there should be no
virtual call overhead. Abstract Session is used to indicate the
interface, this could have also been templated, but the explicit
interface definition makes it clearer.
Specific session implementation for running Memgraph is now implemented
in memgraph_bolt, which instantiates the concrete session type. This may
not be 100% appropriate place, but Memgraph specific session isn't
needed anywhere else.
Bolt/communication tests now use a dummy session and depend only on
communication, which significantly improves test run times.
All these changes make the communication a library which doesn't depend
on storage nor the database. Only shared connection points, which aren't
part of the base communication library are:
* glue/conversion -- which converts between storage and bolt types, and
* communication/result_stream_faker -- templated, but used in tests and query/repl
Depends on D1453
Reviewers: mferencevic, buda, mtomic, msantl
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1456
Summary:
This is the first step in cutting the crazy dependencies of
communication module to the whole database. Includes have been
reorganized and conversion between DecodedValue and other Memgraph types
(TypedValue and PropertyValue) has been extracted to a higher level
component called `communication/conversion`. Encoder, like Decoder, now
relies only on DecodedValue. Hopefully the conversion operations will
not significantly slow down streaming Bolt data.
Additionally, Bolt ID is now wrapped in a class. Our storage model uses
*unsigned* int64, while Bolt expects *signed* int64. The implicit
conversions may lead to encode/decode errors, so the wrapper should
enforce some type safety to prevent such errors.
Reviewers: mferencevic, buda, msantl, mtomic
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1453
Summary:
Added test stream functionality. When a stream is configured, it will try to
consume messages from a kafka topic and return them back to the user.
For now, the messages aren't transformed, so it just returns the payload string.
Depends on D1466
Next steps are persisting stream metadata and transforming messages in order to
store them in the graph.
Reviewers: teon.banek, mtomic
Reviewed By: teon.banek
Subscribers: pullbot, buda
Differential Revision: https://phabricator.memgraph.io/D1474
Summary:
Integrated kafka library into memgraph. This version supports all opencypher
features and will only output messages consumed from kafka.
Depends on D1434
Next steps are persisting stream metadata and transforming messages in order to
store them in the graph.
Reviewers: teon.banek, mtomic, mferencevic, buda
Reviewed By: teon.banek
Subscribers: mferencevic, pullbot, buda
Differential Revision: https://phabricator.memgraph.io/D1466
Summary:
Added basic functionality for kafka streams. The `CREATE STREAM` clause is a
simplified version from the one mentioned in D1415 so we can start testing
end-to-end sooner.
This diff also includes a bug fix in `lcp.list ` for operators that have no
members.
Reviewers: teon.banek, mtomic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1434
Summary:
Wal on workers didn't contain committed transactions ids, this is needed for
distributed recovery so that the master may decide which transactions are
present on all the workers.
Reviewers: buda, msantl
Reviewed By: buda
Subscribers: pullbot, msantl, buda
Differential Revision: https://phabricator.memgraph.io/D1440
Summary:
For reasons unknown to man, antlr didn't want to parse calls
to functions whose name is a single hex letter properly. Now it should work.
Reviewers: teon.banek, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1464
Summary:
Added missing string functions.
I also cleaned up error messages a bit in effort to make them uniform.
Reviewers: teon.banek, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1458
Summary:
This diff implements OpenSSL support in the network stack.
Currently SSL support is only enabled for Bolt connections,
support for RPC connections will be added in another diff.
Reviewers: buda, teon.banek
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1328
Summary:
Hopefully, the mechanism of generating Cartesian is general enough, so
this simple change should work correctly in all cases.
Planner tests have been modified to use a FakeDbAccessor in order to
speed them up and potentially allow extracting planning into a library.
Reviewers: msantl, mtomic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1431
Summary:
This change should correctly plan Cartesian which have dependent Filter
or Expand operators. Tests have been added for those cases. Other cases
are not yet supported and should throw an exception.
Reviewers: msantl, mtomic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1426
Summary:
Converts the RPC stack to use Cap'n Proto for serialization instead of
boost. There are still some traces of boost in other places in the code,
but most of it is removed. A future diff should cleanup boost for good.
The RPC API is now changed to be more flexible with regards to how
serialize data. This makes the simplest cases a bit more verbose, but
allows complex serialization code to be correctly written instead of
relying on hacks. (For reference, look for the old serialization of
`PullRpc` which had a nasty pointer hacks to inject accessors in
`TypedValue`.)
Since RPC messages were uselessly modeled via inheritance of Message
base class, that class is now removed. Furthermore, that approach
doesn't really work with Cap'n Proto. Instead, each message type is
required to have some type information. This can be automated, so
`define-rpc` has been added to LCP, which hopefully simplifies defining
new RPC request and response messages.
Specify Cap'n Proto schema ID in cmake
This preserves Cap'n Proto generated typeIds across multiple generations
of capnp schemas through LCP. It is imperative that typeId stays the
same to ensure that different compilations of Memgraph may communicate
via RPC in a distributed cluster.
Use CLOS for meta information on C++ types in LCP
Since some structure slots and functions have started to repeat
themselves, it makes sense to model C++ meta information via Common Lisp
Object System.
Depends on D1391
Reviewers: buda, dgleich, mferencevic, mtomic, mculinovic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1407
Summary:
Add additional structs and functions for handling C++ meta information.
Add capnp-file and capnp-id arguments to lcp:process-file.
Generate cpp along with hpp and capnp in lcp.
Wrap LogicalOperator base class in lcp:define-class.
Modify logical operators for capnp serialization.
Add query/common.capnp.
Reviewers: mculinovic, buda, mtomic, msantl, ipaljak, dgleich, mferencevic
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1391
Summary:
Utils source files are now moved to a standalone mg-utils library.
Unit and manual tests are no longer collected using glob recursion in
cmake, but are explicitly listed. This allows us to set only required
dependencies of those tests.
Both of these changes should improve compilation and link times, as well
as lower the disk usage.
Additional improvement would be to cleanup utils header files to be
split in .hpp and .cpp as well as merging threading into utils. Other
potential library extractions that shouldn't be difficult are:
* data_structures
* io/network
* communication
Reviewers: buda, mferencevic, dgleich, ipaljak, mculinovic, mtomic, msantl
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1408
Summary:
Command id is necessary in remote produce to identify an ongoing pull
because a transaction can have multiple commands that all belong under
the same plan and tx id.
Reviewers: teon.banek, mtomic, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1386
Summary:
Removing `AS_IS` from GraphView because it doesn't seem like it is necessary for query execution and it also has weird semantics (you might get a mix of old and new records). `Unwind`, `OrderBy` and `PullRemoteOrderBy` now use `OLD` graph view.
Remove AS_IS from GraphView
Fix query_cost_estimator tests
Fix query_expression_evaluator tests
Fix query_plan_match_filter_return tests
Fix query_plan_create_set_remove_delete tests
Fix query_plan_accumulate_aggregate tests
Reviewers: teon.banek, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1390
Summary:
A simplified end-to-end implementation
POD interface set-up, still have bugs with HDDkeys
Version bug fix and first iterator implementation
Fixed out-of-scope reference in PVS iterator
Added PVS unit tests
Reviewers: buda, mferencevic, dgleich, teon.banek
Reviewed By: buda, dgleich
Subscribers: mferencevic, pullbot
Differential Revision: https://phabricator.memgraph.io/D1369
Summary: Global address of `from` was stored in Edge record when created via CreateEdge RPC.
Reviewers: buda, msantl, dgleich
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1387
Summary:
Pointers in AstTreeStorage can point to same nodes. These nodes
should be serialized(saved) only once when serializing Ast tree.
Same goes for deserializing(loading).
When deserializing nodes, one should not use storage Create method,
because it will add node which isn't completely loaded to storage vector.
Therefore, one should use new Deserialize method which doesn't
add node to storage vector. Inserting node into storage vector
is defered until all node data is loaded.
Pass pointer to saved uids set, instead of storage
Delete unused set
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1344
Summary:
Added a new markdown file for concepts and a new test to test the edge
case with upper bound.
Reviewers: teon.banek, mtomic, dgleich, buda, ipaljak
Reviewed By: teon.banek, dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1366
