Summary:
Start removing `is_remote` from `Address`
Remove `GlobalAddress`
Remove `GlobalizedAddress`
Remove bitmasks from `Address`
Remove `is_local` from `Address`
Remove `is_local` from `RecordAccessor`
Remove `worker_id` from `Address`
Remove `worker_id` from `GidGenerator`
Unfriend `IndexRpcServer` from `Storage`
Remove `LocalizedAddressIfPossible`
Make member private
Remove `worker_id` from `Storage`
Copy function to ease removal of distributed logic
Remove `worker_id` from `WriteAheadLog`
Remove `worker_id` from `GraphDb`
Remove `worker_id` from durability
Remove nonexistant function
Remove `gid` from `Address`
Remove usage of `Address`
Remove `Address`
Remove `VertexAddress` and `EdgeAddress`
Fix Id test
Remove `cypher_id` from `VersionList`
Remove `cypher_id` from durability
Remove `cypher_id` member from `VersionList`
Remove `cypher_id` from database
Fix recovery (revert D1142)
Remove unnecessary functions from `GraphDbAccessor`
Revert `InsertEdge` implementation to the way it was in/before D1142
Remove leftover `VertexAddress` from `Edge`
Remove `PostCreateIndex` and `PopulateIndexFromBuildIndex`
Split durability paths into single node and distributed
Fix `TransactionIdFromWalFilename` implementation
Fix tests
Remove `cypher_id` from `snapshooter` and `durability` test
Reviewers: msantl, teon.banek
Reviewed By: msantl
Subscribers: msantl, pullbot
Differential Revision: https://phabricator.memgraph.io/D1647
Summary:
To clean the working directory after this diff you should execute:
```
rm src/database/counters_rpc_messages.capnp
rm src/database/counters_rpc_messages.hpp
rm src/database/serialization.capnp
rm src/database/serialization.hpp
```
Reviewers: teon.banek, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1636
Summary:
This should fix the issue of having a write followed by a read during
distributed execution. Any kind of merger of plans should behave like a
Cartesian with regards to planning the following ScanAll.
Reviewers: mtomic, mferencevic
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1624
Summary:
This diff splits single node and distributed storage from each other.
Currently all of the storage code is copied into two directories (one single
node, one distributed). The logic used in the storage implementation isn't
touched, it will be refactored in following diffs.
To clean the working directory after this diff you should execute:
```
rm database/state_delta.capnp
rm database/state_delta.hpp
rm storage/concurrent_id_mapper_rpc_messages.capnp
rm storage/concurrent_id_mapper_rpc_messages.hpp
```
Reviewers: teon.banek, buda, msantl
Reviewed By: teon.banek, msantl
Subscribers: teon.banek, pullbot
Differential Revision: https://phabricator.memgraph.io/D1625
Summary:
TODO:
~~1. Figure out how to propagate exceptions during lambda evaluation to master.~~
~~2. Make some more complicated test cases to see if everything is~~
~~sent over the network properly (lambdas depending on frame, evaluation context).~~
~~3. Support only `GraphView::OLD`.~~
4. [MAYBE] Send only parts of the frame necessary for lambda evaluation.
~~5. Fix EdgeType handling~~
--------------------
Serialize frame and send it in PrepareForExpand RPC
Move Lambda out of ExpandVariable
Send symbol table and filter lambda in CreateBfsSubcursor RPC
Evaluate filter lambda during the expansion
Send evaluation context in CreateBfsSubcursor RPC
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1600
Summary:
This should allow us to more easily decouple the code which should be
open sourced. Unfortunately, the downside of this approach is that we
cannot rely on virtual calls to dispatch the serialization to correct
type. Another downside is that members need to be publicly accessible
for serialization.
Reviewers: mtomic, msantl
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1596
Summary:
This diff changes the RPC layer to directly return `TResponse` to the user when
issuing a `Call<...>` RPC call. The call throws an exception on failure
(instead of the previous return `nullopt`).
All servers (network, RPC and distributed) are set to have explicit `Shutdown`
methods so that a controlled shutdown can always be performed. The object
destructors now have `CHECK`s to enforce that the `AwaitShutdown` methods were
called.
The distributed memgraph is changed that none of the binaries (master/workers)
crash when there is a communication failure. Instead, the whole cluster starts
a graceful shutdown when a persistent communication error is detected.
Transient errors are allowed during execution. The transaction that errored out
will be aborted on the whole cluster. The cluster state is managed using a new
Heartbeat RPC call.
Reviewers: buda, teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1604
Summary:
With this diff we should be able to support dynamic worker addition.
This is ofcourse a minimal effort maximal impact approach.
This diff introduces new RPC calls when a worker registers.
The `DynamicWorkerAddition` doesn't use `GraphDbAccessor` to get indices because
they create WAL entries.
Reviewers: vkasljevic, ipaljak, buda
Reviewed By: ipaljak
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1594
Summary:
In a bunch of places `TypedValue` was used where `PropertyValue` should be. A lot of times it was only because `TypedValue` serialization code could be reused for `PropertyValue`, only without providing callbacks for `VERTEX`, `EDGE` and `PATH`. So first I wrote separate serialization code for `PropertyValue` and put it into storage folder. Then I fixed all the places where `TypedValue` was incorrectly used instead of `PropertyValue`. I also disabled implicit `TypedValue` to `PropertyValue` conversion in hopes of preventing misuse in the future.
After that, I wrote code for `VertexAccessor` and `EdgeAccessor` serialization and put it into `storage` folder because it was almost duplicated in distributed BFS and pull produce RPC messages. On the sender side, some subset of records (old or new or both) is serialized, and on the reciever side, records are deserialized and immediately put into transaction cache.
Then I rewrote the `TypedValue` serialization functions (`SaveCapnpTypedValue` and `LoadCapnpTypedValue`) to not take callbacks for `VERTEX`, `EDGE` and `PATH`, but use accessor serialization functions instead. That means that any code that wants to use `TypedValue` serialization must hold a reference to `GraphDbAccessor` and `DataManager`, so that should make clients reconsider if they really want to use `TypedValue` instead of `PropertyValue`.
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1598
Summary:
This change introduces a pure virtual initial implementation of the transaction
engine which is then implemented in two versions: single node and distributed.
The interface classes now have the following hierarchy:
```
Engine (pure interface)
|
+----+---------- EngineDistributed (common logic)
| |
EngineSingleNode +-------+--------+
| |
EngineMaster EngineWorker
```
In addition to this layout the `EngineMaster` uses `EngineSingleNode` as its
underlying storage engine and only changes the necessary functions to make
them work with the `EngineWorker`.
After this change I recommend that you delete the following leftover files:
```
rm src/distributed/transactional_cache_cleaner_rpc_messages.*
rm src/transactions/common.*
rm src/transactions/engine_rpc_messages.*
```
Reviewers: teon.banek, msantl, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1589
Summary:
This change improves detection of errorneous situations when starting a
distributed cluster on a single machine. It asserts that the user hasn't
started more memgraph nodes on the same machine with the same durability
directory. Also, this diff improves worker registration. Now workers don't have
to have explicitly set IP addresses. The master will deduce them from the
connecting IP when the worker registers.
Reviewers: teon.banek, buda, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1582
Summary: Recovery file is version inconsistent iff it starts with a correct magic number, has at least one integer written after that and that integer differs from kVersion.
Reviewers: mferencevic, ipaljak, vkasljevic, buda
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1565
Summary:
This diff introduces a new flags
* `--synchronous-commit`
The `--synchronous-commit` tells the WAL when should the deltas be flushed to
the disk drive. By default this is off and the WAL flushes deltas every `N`
milliseconds. If it's turned on, on every transaction end, commit or abort, the
WAL will first flush the deltas and only after that will return from ending a
transaction.
Reviewers: buda, vkasljevic, mferencevic, teon.banek, ipaljak
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1542
Summary: A quick clean-up of user visible error messages. Tried to make them gramatically correct by capitalizing the first word in the sentence and putting a dot at the end.
Reviewers: teon.banek, buda, ipaljak
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1571
Summary:
Changed GRANT ROLE to SET ROLE. Now it is `SET ROLE FOR user TO ROLE` instead of `GRANT ROLE role TO user`. It makes more sense because our users can only have 1 role.
Changed REVOKE ROLE to CLEAR ROLE. Now it is `CLEAR ROLE FOR user` instead of `REVOKE ROLE role FOR user`. REVOKE ROLE would throw exception if user was not a member of role. CLEAR ROLE clears the role whatever it is. I find that the latter makes more sense combined with SET ROLE.
Changed `SHOW ROLE FOR USER user` to `SHOW ROLE FOR user`.
Changed `SHOW USERS FOR ROLE role` to `SHOW USERS FOR role`.
Reviewers: mferencevic, teon.banek, buda
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1572
Summary:
Visitor pattern's main issue is cyclical dependency between classes that
are visited and the visitor instance itself. We need to decouple this
dependency if we want to open source part of the code, namely
non-distributed part. This decoupling is achieved through the use of
`dynamic_cast` in distributed operators. Hopefully the solution is good
enough and doesn't cause performance issues. An alternative solution is
to build our own custom double dispatch solution, but that will
basically boil down to our implementation of runtime type information
and casts.
Note, this only decouples the distributed operators. If and when we
decide that other operators shouldn't be open sourced, the same
`dynamic_cast` pattern should be applied in them also.
Depends on D1563
Reviewers: mtomic, msantl, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1566
Summary:
This is the first step in separating the implementation of distributed
features in operators. Following steps are:
* decoupling distributed visitors
* injecting distributed details in operator state
* minor cleanup or anything else that was overlooked
Reviewers: mtomic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1563
Summary:
We want to make sure that index doesn't miss any results.
This test inserts vertices in the db and checks that the number of inserted
vertices is the same as the number of results from a scan all and a scan all by
label property.
https://app.asana.com/0/478665099752750/762723827276182/f
Reviewers: ipaljak, vkasljevic, teon.banek
Reviewed By: ipaljak
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1558
