Summary:
This change improves detection of errorneous situations when starting a
distributed cluster on a single machine. It asserts that the user hasn't
started more memgraph nodes on the same machine with the same durability
directory. Also, this diff improves worker registration. Now workers don't have
to have explicitly set IP addresses. The master will deduce them from the
connecting IP when the worker registers.
Reviewers: teon.banek, buda, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1582
Summary:
These functions were defined in multiple places. They are moved to
cmake/functions.cmake to keep only one source of truth.
Reviewers: mferencevic, msantl, mculinovic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1578
Summary:
Our implementation of the Bolt protocol now correctly handles INIT message
metadata used for authentification. The related description from the Bolt
standard is: 'The token must contain either just the entry {"scheme": "none"}
or the keys scheme, principal, and credentials. Example {"scheme": "basic",
"principal": "user", "credentials": "secret"}". If no scheme is provided, it
defaults to "none".'
Reviewers: msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1518
Summary:
The raft implementation has been stale for a while now. It doesn't
compile, nor uses Cap'n Proto for serialization. In the future we would
probably rewrite it, so it doesn't need to be part of the repo at this
moment.
Reviewers: mferencevic, mtomic, buda
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1513
Summary:
Previously, our implementation of the Bolt protocol buffered all results in
memory before sending them out to the client. This implementation immediately
streams the results to the client to avoid any memory allocations. Also, this
implementation splits the interpretation and pulling logic into two.
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1495
Summary:
Session specifics have been move out of the Bolt `executing` state, and
are accessed via pure virtual Session type. Our server is templated on
the session and we are setting the concrete type, so there should be no
virtual call overhead. Abstract Session is used to indicate the
interface, this could have also been templated, but the explicit
interface definition makes it clearer.
Specific session implementation for running Memgraph is now implemented
in memgraph_bolt, which instantiates the concrete session type. This may
not be 100% appropriate place, but Memgraph specific session isn't
needed anywhere else.
Bolt/communication tests now use a dummy session and depend only on
communication, which significantly improves test run times.
All these changes make the communication a library which doesn't depend
on storage nor the database. Only shared connection points, which aren't
part of the base communication library are:
* glue/conversion -- which converts between storage and bolt types, and
* communication/result_stream_faker -- templated, but used in tests and query/repl
Depends on D1453
Reviewers: mferencevic, buda, mtomic, msantl
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1456
Summary:
This is the first step in cutting the crazy dependencies of
communication module to the whole database. Includes have been
reorganized and conversion between DecodedValue and other Memgraph types
(TypedValue and PropertyValue) has been extracted to a higher level
component called `communication/conversion`. Encoder, like Decoder, now
relies only on DecodedValue. Hopefully the conversion operations will
not significantly slow down streaming Bolt data.
Additionally, Bolt ID is now wrapped in a class. Our storage model uses
*unsigned* int64, while Bolt expects *signed* int64. The implicit
conversions may lead to encode/decode errors, so the wrapper should
enforce some type safety to prevent such errors.
Reviewers: mferencevic, buda, msantl, mtomic
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1453
Summary:
This diff implements OpenSSL support in the network stack.
Currently SSL support is only enabled for Bolt connections,
support for RPC connections will be added in another diff.
Reviewers: buda, teon.banek
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1328
Summary:
Converts the RPC stack to use Cap'n Proto for serialization instead of
boost. There are still some traces of boost in other places in the code,
but most of it is removed. A future diff should cleanup boost for good.
The RPC API is now changed to be more flexible with regards to how
serialize data. This makes the simplest cases a bit more verbose, but
allows complex serialization code to be correctly written instead of
relying on hacks. (For reference, look for the old serialization of
`PullRpc` which had a nasty pointer hacks to inject accessors in
`TypedValue`.)
Since RPC messages were uselessly modeled via inheritance of Message
base class, that class is now removed. Furthermore, that approach
doesn't really work with Cap'n Proto. Instead, each message type is
required to have some type information. This can be automated, so
`define-rpc` has been added to LCP, which hopefully simplifies defining
new RPC request and response messages.
Specify Cap'n Proto schema ID in cmake
This preserves Cap'n Proto generated typeIds across multiple generations
of capnp schemas through LCP. It is imperative that typeId stays the
same to ensure that different compilations of Memgraph may communicate
via RPC in a distributed cluster.
Use CLOS for meta information on C++ types in LCP
Since some structure slots and functions have started to repeat
themselves, it makes sense to model C++ meta information via Common Lisp
Object System.
Depends on D1391
Reviewers: buda, dgleich, mferencevic, mtomic, mculinovic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1407
Summary:
Command id is necessary in remote produce to identify an ongoing pull
because a transaction can have multiple commands that all belong under
the same plan and tx id.
Reviewers: teon.banek, mtomic, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1386
Summary:
Implemented cluster discovery in distributed memgraph.
When a worker registers, it sends a RPC request to master.
The master assigns that worker an id and sends the information about other
workers (pairs of <worker_id, endpoint>) to the new worker.
Master also sends the information about the new worker to all existing workers
in the process of worker registration.
After the last worker registers, all memgraph instances in the clusters should
know about every other.
Reviewers: mtomic, buda, florijan
Reviewed By: mtomic
Subscribers: teon.banek, dgleich, pullbot
Differential Revision: https://phabricator.memgraph.io/D1339
Summary: Make synchronized snapshot. This invokese the snapshooter on workers on the master snapshot scheduler interval.
Reviewers: msantl, mtomic
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1334
Summary: Adds a commit log garbage collector, which clears old transactions from the commit log
Reviewers: florijan
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1310
Summary:
When commiting/aborting a transaction in tx master engine, make a two
phase commit to all workers so they can stop all futures and clear
transactional cache.
Reviewers: dgleich, florijan
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1320
Summary:
Master shouldn't stop processing rpc calls immediately on shutdown. It
should wait for all workers to stop, and then destroy itself.
Reviewers: dgleich, mferencevic
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1330
Summary:
Remove semicolon.
Semicolon shouldn't be used within macros and should
be explicitly provided by the user of the said macro.
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1321
Summary:
The network layer now has a `Session` that handles all things that should be
done before the `Execute` method is called on sessions. Also, all sessions
now communicate using streams instead of holding the input buffer and writing
to the `Socket`. This design will allow implementation of a SSL middleware.
Reviewers: buda, dgleich
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1314
Summary:
Add different priority VLOGs for distributed memgraph.
For level 3 you'll get logs for dispatching/consuming plans.
For level 4 you'll get logs for tx start/commit/abort, remote produce, remote
pull, remote result consume,
For level 5 there will be a log for each request/response made by the RPC
client.
Master log snippet P9
Worker log snippet P10
Reviewers: florijan, teon.banek
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1296
Summary:
Remove "produce_" and "Produce" as prefix from all distributed stuff.
It's not removed in src/query/ stuff (operators).
Reviewers: dgleich
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1315
Summary:
When performing recovery, ensure that the transaction ID in engine is
bumped to one after the max tx id seen in recovery.
Reviewers: dgleich
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1312
Summary:
- Remove caches on workers as a result of plan expiration or race
during insertion.
- Extract caching functionality into a class.
- Minor refactor of Interpreter::operator()
- New RPC and test for it.
- Rename ConsumePlanRes to DispatchPlanRes for consistency, remove
return value as it's always true and never used.
- Interpreter is now constructed with a `GraphDb` reference. At the
moment only for reaching the `distributed::PlanDispatcher`, but in
the future we should probably use that primarily for planning.
I added a function to `PlanConsumer` that is only used for testing.
I prefer not doing this, but I felt this needed testing. I can remove
it now if you like.
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1292
Summary:
There's no need to heap allocate the request which is used only to be
serialized and sent over the network. Unfortunately, this change
complicates the reading a bit, because we need to deserialize the raw
pointer and put it in std::unique_ptr instead of simply deserializing
the unique_ptr.
Heap allocation shows up visibly in perf during benchmarks, so this
change may yield some improvement.
Reviewers: mferencevic, mtomic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1254
Summary:
Remove a method in tx::Engine whose results can be obtained from commit
log info (also guaranteed to be globally correct in distributed).
Reviewers: dgleich
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1240
Summary:
To see the thread names in htop press <F2> to enter setup and under
'Display options' choose 'Show custom thread names'.
Reviewers: buda, teon.banek, florijan
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1234
Summary:
- Add the said test
- Add `workerid` function
- Add random wait (enabled with flag) to `rpc::Client::Call` for network
latency simulation
Reviewers: buda, mferencevic, teon.banek
Reviewed By: buda, teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1222
Summary:
Previously, the RPC stack used the network stack only to receive messages. The
messages were then added to a separate queue that was processed by different
thread pools. This design was inefficient because there was a lock when
inserting and getting messages from the common queue.
This diff removes the need for separate thread pools by utilising the new
network stack design. This is possible because the new network stack allows
full processing of the network request without blocking the whole queue.
Reviewers: buda, florijan, teon.banek, dgleich, mislav.bradac
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1229
Summary:
Previously, the network stack `communication::Server` accepted connections and
assigned them statically in a round-robin fashion to `communication::Worker`.
That meant that if two compute intensive connections were assigned to the same
worker they would block each other while the other workers would do nothing.
This implementation replaces `communication::Worker` with
`communication::Listener` which holds all accepted connections in one pool and
ensures that all workers execute all connections.
Reviewers: buda, florijan, teon.banek
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1220
Summary:
The queue size stat is updated every time we pop from queue.
This means it won't get updated if we get requests while all threads are
busy processing some long running request. I don't think we care about
the exact queue size in that case, so that is fine.
Reviewers: mferencevic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1213
Summary:
Implementation of remote vertex and edge creation. This diff addresses
the creation API (`GraphDbAccessor::InsertEdge`,
`GraphDbAccessor::InsertRemoteVertex`) and the necessary RPC and
`RemoteCache` stuff.
What is missing for full remote creation support are
`query::plan::operator` changes that are expected to minor. Pushing this
diff as it's large enough, operator and end to end tests in the next.
Also, the naming of existing structures and files is confusing (update
refering to both updates and created, `results` used too often etc.). I
will address this too, but feel free to comment on bad naming.
Reviewers: dgleich, teon.banek, msantl
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1210
Summary:
On the master cleanups are hooked directly into the transaction engine.
This is beneficial because the master might have bigger caches and we
want to clear them as soon as possible.
On the workers there is a periodic RPC call to the master about living
transactions, which takes care of releasing local caches. This is
suboptimal because long transactions will prevent cache GC (like with
data GC). It is however fairly simple.
Note that all cleanup is not done automatically and `RemotePull` has
been reduced accordingly. @msantl, please verify correctness and
consider if the code can be additionally simplified.
Reviewers: teon.banek, msantl
Reviewed By: msantl
Subscribers: pullbot, msantl
Differential Revision: https://phabricator.memgraph.io/D1202
Summary:
Get rid of client class
Fix cppcheck errors
Add documentation to metrics.hpp
Add documentation to stats.hpp
Remove stats from global namespace
Fix build failures
Refactor a bit
Refactor stopwatch into a function
Add rpc execution time stats
Fix segmentation fault
Reviewers: mferencevic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1200
Summary:
It is possible that boost's archive didn't write all data to a stream
before the archive is destroyed. To make sure everything works, archives
are now wrapped in a nested block.
Additionally, there may be some issues if the stream isn't set for
binary reading/writing due to new line character conversion. This
shouldn't pose problems on Linux, but just to make sure it doesn't bite
us in the a$% down the line.
Reviewers: mferencevic, mculinovic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1194
Summary:
Updates are supported, insertions and removals not in this diff. The
test is a bit overdesigned, it happens.
Reviewers: teon.banek, dgleich, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1176
Summary:
NOTE: This diff is still in progress. Many TODOs, lacking documentation
etc. But the main logic is there (some could be different), and it tests
out OK.
Reviewers: teon.banek, msantl, buda
Reviewed By: teon.banek
Subscribers: mferencevic, pullbot
Differential Revision: https://phabricator.memgraph.io/D1138
Summary:
With this patch the number of packets for a simple RPC call is lowered
from 22 to 12 (45% reduction). The number of packets for the Bolt protocol
is lowered from 26 to 18 (30% reduction).
Impact on the Bolt protocol will be a constant of ~ 8 packets less per
connection, while the impact on the RPC protocol will be approximately
a 45% reduction overall.
Reviewers: buda, teon.banek
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1141
Summary: See above. The unit test creates two clients on demand so I guess it works.
Reviewers: mferencevic, florijan, teon.banek
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1136
Summary:
Start removal of old logic
Remove more obsolete classes
Move Message class to RPC
Remove client logic from system
Remove messaging namespace
Move protocol from messaging to rpc
Move System from messaging to rpc
Remove unnecessary namespace
Remove System from RPC Client
Split Client and Server into separate files
Start implementing new client logic
First semi-working state
Changed network protocol layout
Rewrite client
Fix client receive bug
Cleanup code of debug lines
Migrate to accessors
Migrate back to binary boost archives
Remove debug logging from server
Disable timeout test
Reduce message_id from uint64_t to uint32_t
Add multiple workers to server
Fix compiler warnings
Apply clang-format
Reviewers: teon.banek, florijan, dgleich, buda, mtomic
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1129
Summary:
- End to end distributed GraphDb testing
- Refactors as necessary
- Basic RemoteCache for storing remote data
- RemoteDataRpc
As we are on a tight schedule, please let's focus on the essentials:
functionality and proper testing.
Reviewers: dgleich, teon.banek, buda
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1121
Summary:
Close the file descriptor in File destructor. This will prevent
accidental crashes during unexpected destructor calls. For example, if
an exception is thrown before the file is closed. File now takes
ownership of the descriptor. These changes now honor RAII idiom, which
should handle most of the peculiarities of C++.
Use optional value for TryOpenFile function, instead of returning a File
without a descriptor. It makes the failure state more semantically clear
to the API user.
Merge utils/filesystem with utils/file
The files aren't that big, and the naming is a bit confusing because
functions aren't really grouped for file and filesystem distinction.
Reviewers: mferencevic, mtomic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1111
Summary:
Added wrappers for some Unix system calls in utils/filesystem.hpp and implemented
a simple log storage interface for Raft. It is not very efficient, we will need
something more sophisticated later, but this is good enough for testing.
Reviewers: mferencevic, mislav.bradac, buda, mculinovic
Reviewed By: mferencevic
Subscribers: teon.banek, dgleich, pullbot
Differential Revision: https://phabricator.memgraph.io/D1091
Summary:
GraphDb is refactored to become an API exposing different parts
necessary for the database to function. These different parts can have
different implementations in SingleNode or distributed Master/Server
GraphDb implementations.
Interally GraphDb is implemented using two class heirarchies. One
contains all the members and correct wiring for each situation. The
other takes care of initialization and shutdown. This architecture is
practical because it can guarantee that the initialization of the
object structure is complete, before initializing state.
Reviewers: buda, mislav.bradac, dgleich, teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1093
Summary:
Serialization of vertices and edges for distributed. Based on Boost
serialization. Threrefore moved TypedValue serialization from AST to
utils.
Reviewers: buda, dgleich, teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1088
Summary:
The distributed ID mapper is not yet utilised in GraphDb as those
changes are in D1060. Depending on landing order it will be added.
Reviewers: dgleich, mislav.bradac
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1064
Summary:
Implement AddComand method on RaftMember
Move RPCType out of rpc request and reply
Add unit test for AddCommand
Reviewers: mislav.bradac, buda
Reviewed By: mislav.bradac
Subscribers: pullbot, mculinovic
Differential Revision: https://phabricator.memgraph.io/D1042
Summary:
Rpc client wasn't thread safe and required a lock before each rpc call.
The locking functionality is now incorporated in Rpc client.
Reviewers: mislav.bradac
Reviewed By: mislav.bradac
Differential Revision: https://phabricator.memgraph.io/D1056
Summary: In this diff I just wanted to fix tests' flakyness. We can discuss if we want to always pass endpoint as an argument and never pass address:port pair explicitly. However if we decide that, I will do that change in another diff.
Reviewers: dgleich, florijan
Reviewed By: dgleich, florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1049
