Summary:
During the creation of indexes there could be a case in which a vertex contains a label/property but is not a part of index after
index building completes.
This happens if vertices are being inserted while the index is being built.
Reviewers: buda, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1484
Summary:
Session specifics have been move out of the Bolt `executing` state, and
are accessed via pure virtual Session type. Our server is templated on
the session and we are setting the concrete type, so there should be no
virtual call overhead. Abstract Session is used to indicate the
interface, this could have also been templated, but the explicit
interface definition makes it clearer.
Specific session implementation for running Memgraph is now implemented
in memgraph_bolt, which instantiates the concrete session type. This may
not be 100% appropriate place, but Memgraph specific session isn't
needed anywhere else.
Bolt/communication tests now use a dummy session and depend only on
communication, which significantly improves test run times.
All these changes make the communication a library which doesn't depend
on storage nor the database. Only shared connection points, which aren't
part of the base communication library are:
* glue/conversion -- which converts between storage and bolt types, and
* communication/result_stream_faker -- templated, but used in tests and query/repl
Depends on D1453
Reviewers: mferencevic, buda, mtomic, msantl
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1456
Summary:
This is the first step in cutting the crazy dependencies of
communication module to the whole database. Includes have been
reorganized and conversion between DecodedValue and other Memgraph types
(TypedValue and PropertyValue) has been extracted to a higher level
component called `communication/conversion`. Encoder, like Decoder, now
relies only on DecodedValue. Hopefully the conversion operations will
not significantly slow down streaming Bolt data.
Additionally, Bolt ID is now wrapped in a class. Our storage model uses
*unsigned* int64, while Bolt expects *signed* int64. The implicit
conversions may lead to encode/decode errors, so the wrapper should
enforce some type safety to prevent such errors.
Reviewers: mferencevic, buda, msantl, mtomic
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1453
Summary:
Added test stream functionality. When a stream is configured, it will try to
consume messages from a kafka topic and return them back to the user.
For now, the messages aren't transformed, so it just returns the payload string.
Depends on D1466
Next steps are persisting stream metadata and transforming messages in order to
store them in the graph.
Reviewers: teon.banek, mtomic
Reviewed By: teon.banek
Subscribers: pullbot, buda
Differential Revision: https://phabricator.memgraph.io/D1474
Summary:
Added basic functionality for kafka streams. The `CREATE STREAM` clause is a
simplified version from the one mentioned in D1415 so we can start testing
end-to-end sooner.
This diff also includes a bug fix in `lcp.list ` for operators that have no
members.
Reviewers: teon.banek, mtomic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1434
Summary:
This diff implements OpenSSL support in the network stack.
Currently SSL support is only enabled for Bolt connections,
support for RPC connections will be added in another diff.
Reviewers: buda, teon.banek
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1328
Summary:
Add telemetry to main memgraph binary
Add resource usage collector
Add telemetry flag
Change telemetry collector logic
Fix utils compilation
Add timestamp
Add first version of interactive test
Started working on test runner
Implement all tests
Flake8 on runner.py
Integrate test with Apollo
Add TODO
Reviewers: buda, teon.banek
Reviewed By: buda, teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1419
Summary:
Hopefully, the mechanism of generating Cartesian is general enough, so
this simple change should work correctly in all cases.
Planner tests have been modified to use a FakeDbAccessor in order to
speed them up and potentially allow extracting planning into a library.
Reviewers: msantl, mtomic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1431
Summary:
Clangs Address, Thread and Undefined Behaviour sanitizers are now available as build options.
Only one of those can be set ON in the same build.
Reviewers: teon.banek, buda
Reviewed By: buda
Subscribers: buda, pullbot
Differential Revision: https://phabricator.memgraph.io/D1380
Summary:
Converts the RPC stack to use Cap'n Proto for serialization instead of
boost. There are still some traces of boost in other places in the code,
but most of it is removed. A future diff should cleanup boost for good.
The RPC API is now changed to be more flexible with regards to how
serialize data. This makes the simplest cases a bit more verbose, but
allows complex serialization code to be correctly written instead of
relying on hacks. (For reference, look for the old serialization of
`PullRpc` which had a nasty pointer hacks to inject accessors in
`TypedValue`.)
Since RPC messages were uselessly modeled via inheritance of Message
base class, that class is now removed. Furthermore, that approach
doesn't really work with Cap'n Proto. Instead, each message type is
required to have some type information. This can be automated, so
`define-rpc` has been added to LCP, which hopefully simplifies defining
new RPC request and response messages.
Specify Cap'n Proto schema ID in cmake
This preserves Cap'n Proto generated typeIds across multiple generations
of capnp schemas through LCP. It is imperative that typeId stays the
same to ensure that different compilations of Memgraph may communicate
via RPC in a distributed cluster.
Use CLOS for meta information on C++ types in LCP
Since some structure slots and functions have started to repeat
themselves, it makes sense to model C++ meta information via Common Lisp
Object System.
Depends on D1391
Reviewers: buda, dgleich, mferencevic, mtomic, mculinovic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1407
Summary:
Utils source files are now moved to a standalone mg-utils library.
Unit and manual tests are no longer collected using glob recursion in
cmake, but are explicitly listed. This allows us to set only required
dependencies of those tests.
Both of these changes should improve compilation and link times, as well
as lower the disk usage.
Additional improvement would be to cleanup utils header files to be
split in .hpp and .cpp as well as merging threading into utils. Other
potential library extractions that shouldn't be difficult are:
* data_structures
* io/network
* communication
Reviewers: buda, mferencevic, dgleich, ipaljak, mculinovic, mtomic, msantl
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1408
Summary:
Snapshots should have the transaction from which they were created because we need this info for recovery later on.
Otherwise we wouldn't be able to tell the workers from which snapshots to recover. The whole cluster should be recovered
from the same transaction snapshot.
Reviewers: msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1338
Summary:
When commiting/aborting a transaction in tx master engine, make a two
phase commit to all workers so they can stop all futures and clear
transactional cache.
Reviewers: dgleich, florijan
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1320
Summary:
Ensures that query plans are invalidated on the remote only when it's
guaranteed they will never be used on the master. This is done by
invalidating remote caches in the `CachedPlan` destructor.
There are two unplesant side-effects. First, an RPC call is made in an
object destructor. This is somewhat ugly, but not that different then
making an RPC call that must succeed in any other function. Note that
this does NOT slow down any query execution because the relevant
destructor is called by the skiplist garbage collector. The second ugly
side-effect is that in the unit test now we need to sleep to ensure the
skiplist GC destructs a cached plan before checking that it's
invalidated on the remote worker.
We might want to redesign this at some point.
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1302
Summary:
- Remove caches on workers as a result of plan expiration or race
during insertion.
- Extract caching functionality into a class.
- Minor refactor of Interpreter::operator()
- New RPC and test for it.
- Rename ConsumePlanRes to DispatchPlanRes for consistency, remove
return value as it's always true and never used.
- Interpreter is now constructed with a `GraphDb` reference. At the
moment only for reaching the `distributed::PlanDispatcher`, but in
the future we should probably use that primarily for planning.
I added a function to `PlanConsumer` that is only used for testing.
I prefer not doing this, but I felt this needed testing. I can remove
it now if you like.
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1292
Summary: this will make delete query more efficient
Reviewers: mferencevic, mculinovic
Reviewed By: mferencevic
Differential Revision: https://phabricator.memgraph.io/D1282
Summary: Property connected_frauds added and set to zero for strata scenario.
Reviewers: mtomic
Reviewed By: mtomic
Differential Revision: https://phabricator.memgraph.io/D1275
Summary:
During distributed execution, OrderBy is split across workers and the
master gets to merge those results via PullRemoteOrderBy. Since this
operator may be an input to almost any other operator, virtual accessors
to `input` have been added in LogicalOperator.
Depends on D1221
Reviewers: florijan, msantl, buda
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1232
Summary:
- Add the said test
- Add `workerid` function
- Add random wait (enabled with flag) to `rpc::Client::Call` for network
latency simulation
Reviewers: buda, mferencevic, teon.banek
Reviewed By: buda, teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1222
Summary:
Previously, the RPC stack used the network stack only to receive messages. The
messages were then added to a separate queue that was processed by different
thread pools. This design was inefficient because there was a lock when
inserting and getting messages from the common queue.
This diff removes the need for separate thread pools by utilising the new
network stack design. This is possible because the new network stack allows
full processing of the network request without blocking the whole queue.
Reviewers: buda, florijan, teon.banek, dgleich, mislav.bradac
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1229
Summary:
This is still very much in progress. No advanced checks are done to
prevent planning unimplemented things. Basic Cartesian product should
work, for example `MATCH (a), (b) CREATE (a)-[:r]->(c)-[:r]->(b)`. But
anything more advanced may lead to undefined behaviour of the planner
and therefore execution. Use at your own risk!
Add ModifiedSymbols method to LogicalOperator
For planning Cartesian, we need information on which symbols are filled
by operator sub-trees. Currently, this is used to set symbols which
should be transferred over network. Later, they should be used to detect
whether filter expressions use symbols modified from Cartesian branches.
Then we will be able to ensure correct dependency of filters and their
behaviour.
Prepare DistributedPlan for multiple worker plans
Since Cartesian branches need to be split and handled by each worker, we
now dispatch multiple plans to workers.
Reviewers: florijan, msantl, buda
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1208
Summary:
We have been using `Edges::VertexAddress` and `Edges::EdgeAddress` a lot
in other parts of the codebase because it's cleaner to write then
`Address<mvcc::VersionList<Edge>>`, especially in code what should not
really be MVCC-aware. However, a lot of that code should not really be
`Edges` aware either, as that's a storage datastructure that should not
be exposed.
This became annoying, so I extracted these addresses into a type-file. I
don't really like this approach, it might be better to have
`Vertex::Address` and `Edge::Address`, but that means we'd have to
import those headers and we'd get circular dependencies.
“The horror! The horror!”
- Joseph Conrad, Heart of Darkness
Reviewers: teon.banek, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1204
Summary:
This is a basic take on planning distributed writes. Main logic is in handling
the Accumulate operator, which requires Synchronize operation if the results
are used after modification.
Tests for planning distributed writes have been added.
Reviewers: florijan, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1172
Summary:
Queries such as `RETURN 1` should only be run on a single machine. This
change assumes that a query should only be distributed if it contains at
least one `ScanAll` operator, i.e. a `MATCH` clause.
Reviewers: florijan, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1154
