Summary:
This change improves detection of errorneous situations when starting a
distributed cluster on a single machine. It asserts that the user hasn't
started more memgraph nodes on the same machine with the same durability
directory. Also, this diff improves worker registration. Now workers don't have
to have explicitly set IP addresses. The master will deduce them from the
connecting IP when the worker registers.
Reviewers: teon.banek, buda, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1582
Summary:
These functions were defined in multiple places. They are moved to
cmake/functions.cmake to keep only one source of truth.
Reviewers: mferencevic, msantl, mculinovic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1578
Summary:
Our implementation of the Bolt protocol now correctly handles INIT message
metadata used for authentification. The related description from the Bolt
standard is: 'The token must contain either just the entry {"scheme": "none"}
or the keys scheme, principal, and credentials. Example {"scheme": "basic",
"principal": "user", "credentials": "secret"}". If no scheme is provided, it
defaults to "none".'
Reviewers: msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1518
Summary:
The raft implementation has been stale for a while now. It doesn't
compile, nor uses Cap'n Proto for serialization. In the future we would
probably rewrite it, so it doesn't need to be part of the repo at this
moment.
Reviewers: mferencevic, mtomic, buda
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1513
Summary:
Previously, our implementation of the Bolt protocol buffered all results in
memory before sending them out to the client. This implementation immediately
streams the results to the client to avoid any memory allocations. Also, this
implementation splits the interpretation and pulling logic into two.
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1495
Summary:
Session specifics have been move out of the Bolt `executing` state, and
are accessed via pure virtual Session type. Our server is templated on
the session and we are setting the concrete type, so there should be no
virtual call overhead. Abstract Session is used to indicate the
interface, this could have also been templated, but the explicit
interface definition makes it clearer.
Specific session implementation for running Memgraph is now implemented
in memgraph_bolt, which instantiates the concrete session type. This may
not be 100% appropriate place, but Memgraph specific session isn't
needed anywhere else.
Bolt/communication tests now use a dummy session and depend only on
communication, which significantly improves test run times.
All these changes make the communication a library which doesn't depend
on storage nor the database. Only shared connection points, which aren't
part of the base communication library are:
* glue/conversion -- which converts between storage and bolt types, and
* communication/result_stream_faker -- templated, but used in tests and query/repl
Depends on D1453
Reviewers: mferencevic, buda, mtomic, msantl
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1456
Summary:
This is the first step in cutting the crazy dependencies of
communication module to the whole database. Includes have been
reorganized and conversion between DecodedValue and other Memgraph types
(TypedValue and PropertyValue) has been extracted to a higher level
component called `communication/conversion`. Encoder, like Decoder, now
relies only on DecodedValue. Hopefully the conversion operations will
not significantly slow down streaming Bolt data.
Additionally, Bolt ID is now wrapped in a class. Our storage model uses
*unsigned* int64, while Bolt expects *signed* int64. The implicit
conversions may lead to encode/decode errors, so the wrapper should
enforce some type safety to prevent such errors.
Reviewers: mferencevic, buda, msantl, mtomic
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1453
Summary:
This diff implements OpenSSL support in the network stack.
Currently SSL support is only enabled for Bolt connections,
support for RPC connections will be added in another diff.
Reviewers: buda, teon.banek
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1328
Summary:
Converts the RPC stack to use Cap'n Proto for serialization instead of
boost. There are still some traces of boost in other places in the code,
but most of it is removed. A future diff should cleanup boost for good.
The RPC API is now changed to be more flexible with regards to how
serialize data. This makes the simplest cases a bit more verbose, but
allows complex serialization code to be correctly written instead of
relying on hacks. (For reference, look for the old serialization of
`PullRpc` which had a nasty pointer hacks to inject accessors in
`TypedValue`.)
Since RPC messages were uselessly modeled via inheritance of Message
base class, that class is now removed. Furthermore, that approach
doesn't really work with Cap'n Proto. Instead, each message type is
required to have some type information. This can be automated, so
`define-rpc` has been added to LCP, which hopefully simplifies defining
new RPC request and response messages.
Specify Cap'n Proto schema ID in cmake
This preserves Cap'n Proto generated typeIds across multiple generations
of capnp schemas through LCP. It is imperative that typeId stays the
same to ensure that different compilations of Memgraph may communicate
via RPC in a distributed cluster.
Use CLOS for meta information on C++ types in LCP
Since some structure slots and functions have started to repeat
themselves, it makes sense to model C++ meta information via Common Lisp
Object System.
Depends on D1391
Reviewers: buda, dgleich, mferencevic, mtomic, mculinovic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1407
Summary:
Command id is necessary in remote produce to identify an ongoing pull
because a transaction can have multiple commands that all belong under
the same plan and tx id.
Reviewers: teon.banek, mtomic, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1386
Summary:
Implemented cluster discovery in distributed memgraph.
When a worker registers, it sends a RPC request to master.
The master assigns that worker an id and sends the information about other
workers (pairs of <worker_id, endpoint>) to the new worker.
Master also sends the information about the new worker to all existing workers
in the process of worker registration.
After the last worker registers, all memgraph instances in the clusters should
know about every other.
Reviewers: mtomic, buda, florijan
Reviewed By: mtomic
Subscribers: teon.banek, dgleich, pullbot
Differential Revision: https://phabricator.memgraph.io/D1339
Summary: Make synchronized snapshot. This invokese the snapshooter on workers on the master snapshot scheduler interval.
Reviewers: msantl, mtomic
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1334
Summary: Adds a commit log garbage collector, which clears old transactions from the commit log
Reviewers: florijan
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1310
Summary:
When commiting/aborting a transaction in tx master engine, make a two
phase commit to all workers so they can stop all futures and clear
transactional cache.
Reviewers: dgleich, florijan
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1320
Summary:
Master shouldn't stop processing rpc calls immediately on shutdown. It
should wait for all workers to stop, and then destroy itself.
Reviewers: dgleich, mferencevic
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1330
Summary:
Remove semicolon.
Semicolon shouldn't be used within macros and should
be explicitly provided by the user of the said macro.
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1321
Summary:
The network layer now has a `Session` that handles all things that should be
done before the `Execute` method is called on sessions. Also, all sessions
now communicate using streams instead of holding the input buffer and writing
to the `Socket`. This design will allow implementation of a SSL middleware.
Reviewers: buda, dgleich
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1314
Summary:
Add different priority VLOGs for distributed memgraph.
For level 3 you'll get logs for dispatching/consuming plans.
For level 4 you'll get logs for tx start/commit/abort, remote produce, remote
pull, remote result consume,
For level 5 there will be a log for each request/response made by the RPC
client.
Master log snippet P9
Worker log snippet P10
Reviewers: florijan, teon.banek
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1296
Summary:
Remove "produce_" and "Produce" as prefix from all distributed stuff.
It's not removed in src/query/ stuff (operators).
Reviewers: dgleich
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1315
Summary:
When performing recovery, ensure that the transaction ID in engine is
bumped to one after the max tx id seen in recovery.
Reviewers: dgleich
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1312
Summary:
- Remove caches on workers as a result of plan expiration or race
during insertion.
- Extract caching functionality into a class.
- Minor refactor of Interpreter::operator()
- New RPC and test for it.
- Rename ConsumePlanRes to DispatchPlanRes for consistency, remove
return value as it's always true and never used.
- Interpreter is now constructed with a `GraphDb` reference. At the
moment only for reaching the `distributed::PlanDispatcher`, but in
the future we should probably use that primarily for planning.
I added a function to `PlanConsumer` that is only used for testing.
I prefer not doing this, but I felt this needed testing. I can remove
it now if you like.
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1292
Summary:
There's no need to heap allocate the request which is used only to be
serialized and sent over the network. Unfortunately, this change
complicates the reading a bit, because we need to deserialize the raw
pointer and put it in std::unique_ptr instead of simply deserializing
the unique_ptr.
Heap allocation shows up visibly in perf during benchmarks, so this
change may yield some improvement.
Reviewers: mferencevic, mtomic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1254
