Summary:
This change splits mg-communication into mg-communication and
mg-comm-rpc. The main reason for doing this, is to make separation of
enterprise features from community Memgraph more clear.
Reviewers: mferencevic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1844
Summary:
Serialization of std::unique_ptr and std::shared_ptr now requires a
custom callback for handling the concrete element that is pointed to.
We use C++ type trait which checks whether the we are using a
polymorphic type --- class that has at least 1 virtual function. This
obviously doesn't work with pointers to base classes of hierarchies
without virtual member functions. But we don't use that kind of
inheritance, why would we, right? :)
(Luckily the breaking case isn't serialized, and hopefully never will
be. Perhaps we fix such inheritance in the future.)
Reviewers: mferencevic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1753
Summary: Starting memgraph with logging verbosity level 12 would crash memgraph, because extended and regular callbacks were not properly differentiated in logging.
Reviewers: mferencevic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1747
Summary:
TypeInfo will be needed for upcoming serialization via SLK. This diff
changes the already defined TypeInfo by removing the reliance on
capnp::typeId calls. The struct itself is now in utils.
Hopefully, this shouldn't break our RPC stack due to new ID generation.
Reviewers: mferencevic, mtomic, llugovic
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1735
Summary:
Since we need to send `StateDelta`s over the wire in HA, we need to be
able to serialize those bad boys.
This diff hopefully does this the right way.
Reviewers: teon.banek, mferencevic, ipaljak
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1725
Summary:
If the `STDIN_FILENO` is a `TTY`, then an interactive command prompt
is shown. Otherwise, client runs in non-interactive mode.
Shell commands start with a colon sign, and end at the end of
line.
Csv and tabular output formats are supported.
Reviewers: teon.banek, mferencevic
Reviewed By: teon.banek, mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1633
Summary:
This should allow us to more easily decouple the code which should be
open sourced. Unfortunately, the downside of this approach is that we
cannot rely on virtual calls to dispatch the serialization to correct
type. Another downside is that members need to be publicly accessible
for serialization.
Reviewers: mtomic, msantl
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1596
Summary:
This diff changes the RPC layer to directly return `TResponse` to the user when
issuing a `Call<...>` RPC call. The call throws an exception on failure
(instead of the previous return `nullopt`).
All servers (network, RPC and distributed) are set to have explicit `Shutdown`
methods so that a controlled shutdown can always be performed. The object
destructors now have `CHECK`s to enforce that the `AwaitShutdown` methods were
called.
The distributed memgraph is changed that none of the binaries (master/workers)
crash when there is a communication failure. Instead, the whole cluster starts
a graceful shutdown when a persistent communication error is detected.
Transient errors are allowed during execution. The transaction that errored out
will be aborted on the whole cluster. The cluster state is managed using a new
Heartbeat RPC call.
Reviewers: buda, teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1604
Summary: This diff undoes the changes made in D925
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1614
Summary:
This change improves detection of errorneous situations when starting a
distributed cluster on a single machine. It asserts that the user hasn't
started more memgraph nodes on the same machine with the same durability
directory. Also, this diff improves worker registration. Now workers don't have
to have explicitly set IP addresses. The master will deduce them from the
connecting IP when the worker registers.
Reviewers: teon.banek, buda, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1582
Summary:
These functions were defined in multiple places. They are moved to
cmake/functions.cmake to keep only one source of truth.
Reviewers: mferencevic, msantl, mculinovic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1578
Summary:
Our implementation of the Bolt protocol now correctly handles INIT message
metadata used for authentification. The related description from the Bolt
standard is: 'The token must contain either just the entry {"scheme": "none"}
or the keys scheme, principal, and credentials. Example {"scheme": "basic",
"principal": "user", "credentials": "secret"}". If no scheme is provided, it
defaults to "none".'
Reviewers: msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1518
Summary:
The raft implementation has been stale for a while now. It doesn't
compile, nor uses Cap'n Proto for serialization. In the future we would
probably rewrite it, so it doesn't need to be part of the repo at this
moment.
Reviewers: mferencevic, mtomic, buda
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1513
Summary:
Previously, our implementation of the Bolt protocol buffered all results in
memory before sending them out to the client. This implementation immediately
streams the results to the client to avoid any memory allocations. Also, this
implementation splits the interpretation and pulling logic into two.
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1495
Summary:
Session specifics have been move out of the Bolt `executing` state, and
are accessed via pure virtual Session type. Our server is templated on
the session and we are setting the concrete type, so there should be no
virtual call overhead. Abstract Session is used to indicate the
interface, this could have also been templated, but the explicit
interface definition makes it clearer.
Specific session implementation for running Memgraph is now implemented
in memgraph_bolt, which instantiates the concrete session type. This may
not be 100% appropriate place, but Memgraph specific session isn't
needed anywhere else.
Bolt/communication tests now use a dummy session and depend only on
communication, which significantly improves test run times.
All these changes make the communication a library which doesn't depend
on storage nor the database. Only shared connection points, which aren't
part of the base communication library are:
* glue/conversion -- which converts between storage and bolt types, and
* communication/result_stream_faker -- templated, but used in tests and query/repl
Depends on D1453
Reviewers: mferencevic, buda, mtomic, msantl
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1456
Summary:
This is the first step in cutting the crazy dependencies of
communication module to the whole database. Includes have been
reorganized and conversion between DecodedValue and other Memgraph types
(TypedValue and PropertyValue) has been extracted to a higher level
component called `communication/conversion`. Encoder, like Decoder, now
relies only on DecodedValue. Hopefully the conversion operations will
not significantly slow down streaming Bolt data.
Additionally, Bolt ID is now wrapped in a class. Our storage model uses
*unsigned* int64, while Bolt expects *signed* int64. The implicit
conversions may lead to encode/decode errors, so the wrapper should
enforce some type safety to prevent such errors.
Reviewers: mferencevic, buda, msantl, mtomic
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1453
Summary:
This diff implements OpenSSL support in the network stack.
Currently SSL support is only enabled for Bolt connections,
support for RPC connections will be added in another diff.
Reviewers: buda, teon.banek
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1328
Summary:
Converts the RPC stack to use Cap'n Proto for serialization instead of
boost. There are still some traces of boost in other places in the code,
but most of it is removed. A future diff should cleanup boost for good.
The RPC API is now changed to be more flexible with regards to how
serialize data. This makes the simplest cases a bit more verbose, but
allows complex serialization code to be correctly written instead of
relying on hacks. (For reference, look for the old serialization of
`PullRpc` which had a nasty pointer hacks to inject accessors in
`TypedValue`.)
Since RPC messages were uselessly modeled via inheritance of Message
base class, that class is now removed. Furthermore, that approach
doesn't really work with Cap'n Proto. Instead, each message type is
required to have some type information. This can be automated, so
`define-rpc` has been added to LCP, which hopefully simplifies defining
new RPC request and response messages.
Specify Cap'n Proto schema ID in cmake
This preserves Cap'n Proto generated typeIds across multiple generations
of capnp schemas through LCP. It is imperative that typeId stays the
same to ensure that different compilations of Memgraph may communicate
via RPC in a distributed cluster.
Use CLOS for meta information on C++ types in LCP
Since some structure slots and functions have started to repeat
themselves, it makes sense to model C++ meta information via Common Lisp
Object System.
Depends on D1391
Reviewers: buda, dgleich, mferencevic, mtomic, mculinovic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1407
Summary:
Command id is necessary in remote produce to identify an ongoing pull
because a transaction can have multiple commands that all belong under
the same plan and tx id.
Reviewers: teon.banek, mtomic, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1386
