Summary:
Start removing `is_remote` from `Address`
Remove `GlobalAddress`
Remove `GlobalizedAddress`
Remove bitmasks from `Address`
Remove `is_local` from `Address`
Remove `is_local` from `RecordAccessor`
Remove `worker_id` from `Address`
Remove `worker_id` from `GidGenerator`
Unfriend `IndexRpcServer` from `Storage`
Remove `LocalizedAddressIfPossible`
Make member private
Remove `worker_id` from `Storage`
Copy function to ease removal of distributed logic
Remove `worker_id` from `WriteAheadLog`
Remove `worker_id` from `GraphDb`
Remove `worker_id` from durability
Remove nonexistant function
Remove `gid` from `Address`
Remove usage of `Address`
Remove `Address`
Remove `VertexAddress` and `EdgeAddress`
Fix Id test
Remove `cypher_id` from `VersionList`
Remove `cypher_id` from durability
Remove `cypher_id` member from `VersionList`
Remove `cypher_id` from database
Fix recovery (revert D1142)
Remove unnecessary functions from `GraphDbAccessor`
Revert `InsertEdge` implementation to the way it was in/before D1142
Remove leftover `VertexAddress` from `Edge`
Remove `PostCreateIndex` and `PopulateIndexFromBuildIndex`
Split durability paths into single node and distributed
Fix `TransactionIdFromWalFilename` implementation
Fix tests
Remove `cypher_id` from `snapshooter` and `durability` test
Reviewers: msantl, teon.banek
Reviewed By: msantl
Subscribers: msantl, pullbot
Differential Revision: https://phabricator.memgraph.io/D1647
Summary:
To clean the working directory after this diff you should execute:
```
rm src/database/counters_rpc_messages.capnp
rm src/database/counters_rpc_messages.hpp
rm src/database/serialization.capnp
rm src/database/serialization.hpp
```
Reviewers: teon.banek, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1636
Summary:
This diff splits single node and distributed storage from each other.
Currently all of the storage code is copied into two directories (one single
node, one distributed). The logic used in the storage implementation isn't
touched, it will be refactored in following diffs.
To clean the working directory after this diff you should execute:
```
rm database/state_delta.capnp
rm database/state_delta.hpp
rm storage/concurrent_id_mapper_rpc_messages.capnp
rm storage/concurrent_id_mapper_rpc_messages.hpp
```
Reviewers: teon.banek, buda, msantl
Reviewed By: teon.banek, msantl
Subscribers: teon.banek, pullbot
Differential Revision: https://phabricator.memgraph.io/D1625
Summary:
TODO:
~~1. Figure out how to propagate exceptions during lambda evaluation to master.~~
~~2. Make some more complicated test cases to see if everything is~~
~~sent over the network properly (lambdas depending on frame, evaluation context).~~
~~3. Support only `GraphView::OLD`.~~
4. [MAYBE] Send only parts of the frame necessary for lambda evaluation.
~~5. Fix EdgeType handling~~
--------------------
Serialize frame and send it in PrepareForExpand RPC
Move Lambda out of ExpandVariable
Send symbol table and filter lambda in CreateBfsSubcursor RPC
Evaluate filter lambda during the expansion
Send evaluation context in CreateBfsSubcursor RPC
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1600
Summary:
This change should allow for multiple `add_lcp` functions to exist in a
single CMakeLists.txt, each adding LCP files to a different target.
Supporting this feature allows us to separate LCP files for single node
and distributed.
Reviewers: mferencevic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1613
Summary:
Knowledge of distributed operators is now removed from PlanPrinter
class. The DistributedOperatorVisitor and PlanPrinter are modified so
that they may be multiple inherited. This is done using virtual
inheritance of HierarchicalLogicalOperatorVisitor. Multiple inheritance
is used to derived a DistributedPlanPrinter which knows how to print
distributed in operators. This removes the dependency of single node
pretty printing on distributed.
Reviewers: msantl, mtomic
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1606
Summary:
With this diff we should be able to support dynamic worker addition.
This is ofcourse a minimal effort maximal impact approach.
This diff introduces new RPC calls when a worker registers.
The `DynamicWorkerAddition` doesn't use `GraphDbAccessor` to get indices because
they create WAL entries.
Reviewers: vkasljevic, ipaljak, buda
Reviewed By: ipaljak
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1594
Summary:
In a bunch of places `TypedValue` was used where `PropertyValue` should be. A lot of times it was only because `TypedValue` serialization code could be reused for `PropertyValue`, only without providing callbacks for `VERTEX`, `EDGE` and `PATH`. So first I wrote separate serialization code for `PropertyValue` and put it into storage folder. Then I fixed all the places where `TypedValue` was incorrectly used instead of `PropertyValue`. I also disabled implicit `TypedValue` to `PropertyValue` conversion in hopes of preventing misuse in the future.
After that, I wrote code for `VertexAccessor` and `EdgeAccessor` serialization and put it into `storage` folder because it was almost duplicated in distributed BFS and pull produce RPC messages. On the sender side, some subset of records (old or new or both) is serialized, and on the reciever side, records are deserialized and immediately put into transaction cache.
Then I rewrote the `TypedValue` serialization functions (`SaveCapnpTypedValue` and `LoadCapnpTypedValue`) to not take callbacks for `VERTEX`, `EDGE` and `PATH`, but use accessor serialization functions instead. That means that any code that wants to use `TypedValue` serialization must hold a reference to `GraphDbAccessor` and `DataManager`, so that should make clients reconsider if they really want to use `TypedValue` instead of `PropertyValue`.
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1598
Summary:
This change introduces a pure virtual initial implementation of the transaction
engine which is then implemented in two versions: single node and distributed.
The interface classes now have the following hierarchy:
```
Engine (pure interface)
|
+----+---------- EngineDistributed (common logic)
| |
EngineSingleNode +-------+--------+
| |
EngineMaster EngineWorker
```
In addition to this layout the `EngineMaster` uses `EngineSingleNode` as its
underlying storage engine and only changes the necessary functions to make
them work with the `EngineWorker`.
After this change I recommend that you delete the following leftover files:
```
rm src/distributed/transactional_cache_cleaner_rpc_messages.*
rm src/transactions/common.*
rm src/transactions/engine_rpc_messages.*
```
Reviewers: teon.banek, msantl, buda
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1589
Summary:
These functions were defined in multiple places. They are moved to
cmake/functions.cmake to keep only one source of truth.
Reviewers: mferencevic, msantl, mculinovic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1578
Summary:
In order to add kafka benchmark, `memgraph_bolt.cpp` has been split.
Now we have `memgraph_init.cpp/hpp` files with common memgraph startup code.
Kafka benchmark implements a new `main` function that doesn't start a bolt
server, it just creates and starts a stream. Then it waits for the stream to
start consuming and measures the time it took to import the given number of
entries.
This benchmark is in a new folder, `feature_benchmark`, and so should any new
bechmark that measures performance of memgraphs features.
Reviewers: mferencevic, teon.banek, ipaljak, vkasljevic
Reviewed By: mferencevic, teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1552
Summary:
This is the first step in separating the implementation of distributed
features in operators. Following steps are:
* decoupling distributed visitors
* injecting distributed details in operator state
* minor cleanup or anything else that was overlooked
Reviewers: mtomic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1563
Summary:
Instead of DataManager returning Cache which can fetch data when needed,
I refactored the code so that the Cache is simple wrapper around
unordered_map and the DataManager is one that is fetching data. Also Cache
is not visible from outside of the DataManager so we can add LRU policy
without changing anything else.
Reviewers: msantl, ipaljak, teon.banek, buda
Reviewed By: msantl, teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1545
Summary:
Since we switched to Cap'n Proto serialization there's no need for
keeping boost around anymore.
Reviewers: mtomic, mferencevic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1515
Summary:
This change, hopefully, simplifies the implementation of different kinds
of GraphDb. The pimpl idiom is now simplified by removing all of the
crazy inheritance. Implementations classes are just plain data stores,
without any methods. The interface classes now have a more flat
hierarchy:
```
GraphDb (pure interface)
|
+----+---------- DistributedGraphDb (pure interface)
| |
Single Node +-----+------+
| |
Master Worker
```
DistributedGraphDb is used as an intermediate interface for all the
things that should work only in distributed. Therefore, virtual calls
for distributed stuff have been removed from GraphDb. Some are exposed
via DistributedGraphDb, other's are only in concrete Master and Worker
classes. The code which relied on those virtual calls has been
refactored to either use DistributedGraphDb, take a pointer to what is
actually needed or use dynamic_cast. Obviously, dynamic_cast is a
temporary solution and should be replaced with another mechanism (e.g.
virtual call, or some other function pointer style).
The cost of the above change is some code duplication in constructors
and destructors of classes. This duplication has a lot of little tweaks
that make it hard to generalize, not to mention that virtual calls do
not work in constructor and destructor. If we really care about
generalizing this, we should think about abandoning RAII in favor of
constructor + Init method.
The next steps for splitting the dependencies that seem logical are:
1) Split GraphDbAccessor implementation, either via inheritance or
passing in an implementation pointer. GraphDbAccessor should then
only be created by a virtual call on GraphDb.
2) Split Interpreter implementation. Besides allowing single node
interpreter to exist without depending on distributed, this will
enable the planner and operators to be correctly separated.
Reviewers: msantl, mferencevic, ipaljak
Reviewed By: msantl
Subscribers: dgleich, pullbot
Differential Revision: https://phabricator.memgraph.io/D1493
Summary:
First iteration in implementing kafka.
Currently, memgraph streams won't use the transform script provided in the
`CREATE STREAM` query.
There is a manual test that serves a POC purpose which we'll use to fully wire
kafka in memgraph.
Since streams need to download the script, I moved curl init from
telemetry.
Reviewers: teon.banek, mferencevic
Reviewed By: mferencevic
Subscribers: ipaljak, pullbot, buda
Differential Revision: https://phabricator.memgraph.io/D1491
Summary:
Session specifics have been move out of the Bolt `executing` state, and
are accessed via pure virtual Session type. Our server is templated on
the session and we are setting the concrete type, so there should be no
virtual call overhead. Abstract Session is used to indicate the
interface, this could have also been templated, but the explicit
interface definition makes it clearer.
Specific session implementation for running Memgraph is now implemented
in memgraph_bolt, which instantiates the concrete session type. This may
not be 100% appropriate place, but Memgraph specific session isn't
needed anywhere else.
Bolt/communication tests now use a dummy session and depend only on
communication, which significantly improves test run times.
All these changes make the communication a library which doesn't depend
on storage nor the database. Only shared connection points, which aren't
part of the base communication library are:
* glue/conversion -- which converts between storage and bolt types, and
* communication/result_stream_faker -- templated, but used in tests and query/repl
Depends on D1453
Reviewers: mferencevic, buda, mtomic, msantl
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1456
Summary:
This is the first step in cutting the crazy dependencies of
communication module to the whole database. Includes have been
reorganized and conversion between DecodedValue and other Memgraph types
(TypedValue and PropertyValue) has been extracted to a higher level
component called `communication/conversion`. Encoder, like Decoder, now
relies only on DecodedValue. Hopefully the conversion operations will
not significantly slow down streaming Bolt data.
Additionally, Bolt ID is now wrapped in a class. Our storage model uses
*unsigned* int64, while Bolt expects *signed* int64. The implicit
conversions may lead to encode/decode errors, so the wrapper should
enforce some type safety to prevent such errors.
Reviewers: mferencevic, buda, msantl, mtomic
Reviewed By: mferencevic, mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1453
Summary:
Integrated kafka library into memgraph. This version supports all opencypher
features and will only output messages consumed from kafka.
Depends on D1434
Next steps are persisting stream metadata and transforming messages in order to
store them in the graph.
Reviewers: teon.banek, mtomic, mferencevic, buda
Reviewed By: teon.banek
Subscribers: mferencevic, pullbot, buda
Differential Revision: https://phabricator.memgraph.io/D1466
Summary:
This diff implements OpenSSL support in the network stack.
Currently SSL support is only enabled for Bolt connections,
support for RPC connections will be added in another diff.
Reviewers: buda, teon.banek
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1328
Summary:
Add telemetry to main memgraph binary
Add resource usage collector
Add telemetry flag
Change telemetry collector logic
Fix utils compilation
Add timestamp
Add first version of interactive test
Started working on test runner
Implement all tests
Flake8 on runner.py
Integrate test with Apollo
Add TODO
Reviewers: buda, teon.banek
Reviewed By: buda, teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1419
Summary:
Converts the RPC stack to use Cap'n Proto for serialization instead of
boost. There are still some traces of boost in other places in the code,
but most of it is removed. A future diff should cleanup boost for good.
The RPC API is now changed to be more flexible with regards to how
serialize data. This makes the simplest cases a bit more verbose, but
allows complex serialization code to be correctly written instead of
relying on hacks. (For reference, look for the old serialization of
`PullRpc` which had a nasty pointer hacks to inject accessors in
`TypedValue`.)
Since RPC messages were uselessly modeled via inheritance of Message
base class, that class is now removed. Furthermore, that approach
doesn't really work with Cap'n Proto. Instead, each message type is
required to have some type information. This can be automated, so
`define-rpc` has been added to LCP, which hopefully simplifies defining
new RPC request and response messages.
Specify Cap'n Proto schema ID in cmake
This preserves Cap'n Proto generated typeIds across multiple generations
of capnp schemas through LCP. It is imperative that typeId stays the
same to ensure that different compilations of Memgraph may communicate
via RPC in a distributed cluster.
Use CLOS for meta information on C++ types in LCP
Since some structure slots and functions have started to repeat
themselves, it makes sense to model C++ meta information via Common Lisp
Object System.
Depends on D1391
Reviewers: buda, dgleich, mferencevic, mtomic, mculinovic, msantl
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1407
Summary:
Add additional structs and functions for handling C++ meta information.
Add capnp-file and capnp-id arguments to lcp:process-file.
Generate cpp along with hpp and capnp in lcp.
Wrap LogicalOperator base class in lcp:define-class.
Modify logical operators for capnp serialization.
Add query/common.capnp.
Reviewers: mculinovic, buda, mtomic, msantl, ipaljak, dgleich, mferencevic
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1391
Summary:
Utils source files are now moved to a standalone mg-utils library.
Unit and manual tests are no longer collected using glob recursion in
cmake, but are explicitly listed. This allows us to set only required
dependencies of those tests.
Both of these changes should improve compilation and link times, as well
as lower the disk usage.
Additional improvement would be to cleanup utils header files to be
split in .hpp and .cpp as well as merging threading into utils. Other
potential library extractions that shouldn't be difficult are:
* data_structures
* io/network
* communication
Reviewers: buda, mferencevic, dgleich, ipaljak, mculinovic, mtomic, msantl
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1408
Summary:
A simplified end-to-end implementation
POD interface set-up, still have bugs with HDDkeys
Version bug fix and first iterator implementation
Fixed out-of-scope reference in PVS iterator
Added PVS unit tests
Reviewers: buda, mferencevic, dgleich, teon.banek
Reviewed By: buda, dgleich
Subscribers: mferencevic, pullbot
Differential Revision: https://phabricator.memgraph.io/D1369
Summary:
Since we are moving from boost to Capnp for serialization, it makes
sense to keep all of the LogicalOperator classes in LCP format. This
will make it easier to generate Capnp code.
Depends on D1361
Reviewers: buda, mferencevic, msantl, dgleich, ipaljak, mculinovic, mtomic
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1362
