Summary:
Instead of passing `coordination`, pass `rpc_worker_clients` that
holds a map of worker_id->clientPool. By having only one instance of
`RpcWorkerClients` that is owned by `GraphDB` and passing it by refference
we'll share the same client pools for rpc clients.
Reviewers: teon.banek, florijan, dgleich, mferencevic
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1261
Summary:
Usually a single RPC call takes 50us, which is a lot lower than our
millisecond sleep. Calling sleep with less than a ms duration may not
be really supported (due to timer granularity), but this change should
cause some sub-ms sleep.
Reviewers: florijan, msantl, mferencevic
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1258
Summary:
There's no need to heap allocate the request which is used only to be
serialized and sent over the network. Unfortunately, this change
complicates the reading a bit, because we need to deserialize the raw
pointer and put it in std::unique_ptr instead of simply deserializing
the unique_ptr.
Heap allocation shows up visibly in perf during benchmarks, so this
change may yield some improvement.
Reviewers: mferencevic, mtomic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1254
Summary:
Flag cluster-prefix is added because we want to differentiate
between stats collected on different memgraph clusters.
Reviewers: mtomic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1245
Summary: It was possible for transaction to be double freed because both the AllClear and SingleClear of transactions could delete the pointer
Reviewers: florijan, mferencevic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1250
Summary:
Release of per-transaction data in distributed Memgraph refactored. The
master node no longer releases each time a transaction is done, thus
offloading some work from the engine.
Reviewers: dgleich
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1235
Summary:
Memgraph has flag --rpc-num-workers, so support for this
was added to script.
Reviewers: buda, mtomic
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1243
Summary:
Remove a method in tx::Engine whose results can be obtained from commit
log info (also guaranteed to be globally correct in distributed).
Reviewers: dgleich
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1240
Summary:
Difficult to test properly as the problem was an implicit conversion of
`gid::Gid` to `mvcc::VersionList<> *`. The only proper way to defend
against this would be to make `gid::Gid` a type.
The `CHECK` added in this diff does not help, but should be there, so...
Reviewers: dgleich
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1244
Summary: It seems that boost serialize doesn't work well with ltalloc.
Reviewers: mferencevic, dgleich, teon.banek
Reviewed By: mferencevic, dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1233
Summary:
During distributed execution, OrderBy is split across workers and the
master gets to merge those results via PullRemoteOrderBy. Since this
operator may be an input to almost any other operator, virtual accessors
to `input` have been added in LogicalOperator.
Depends on D1221
Reviewers: florijan, msantl, buda
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1232
Summary:
Extracted `TypedValueVectorCompare` and `RemotePuller` from operators
so it can be reused.
The new `PullRemoteOrerBy` operator pulls one result from each worker and one
from master, relies on the fact that workers/master returned sorted results,
returns the next one in order, and pulls the source of that result to get the
next one.
Depends on D1215 that (at the moment) is still in review.
Reviewers: florijan, teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1221
Summary:
- The expansion vertex gets created on the origin's worker
- The edge automatically gets created wherever necessary
- Vertex creation logic reuse
- End to end test
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1227
Summary:
To see the thread names in htop press <F2> to enter setup and under
'Display options' choose 'Show custom thread names'.
Reviewers: buda, teon.banek, florijan
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1234
Summary:
- Add the said test
- Add `workerid` function
- Add random wait (enabled with flag) to `rpc::Client::Call` for network
latency simulation
Reviewers: buda, mferencevic, teon.banek
Reviewed By: buda, teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1222
Summary:
Previously, the RPC stack used the network stack only to receive messages. The
messages were then added to a separate queue that was processed by different
thread pools. This design was inefficient because there was a lock when
inserting and getting messages from the common queue.
This diff removes the need for separate thread pools by utilising the new
network stack design. This is possible because the new network stack allows
full processing of the network request without blocking the whole queue.
Reviewers: buda, florijan, teon.banek, dgleich, mislav.bradac
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1229
Summary:
This may improve the query execution workload, because the Expand will
yield local results while it waits for remote ones. Note that we rely on
the fact that walking the graph produces results without any predetermined
order. Therefore, we can yield paths as we see fit. Enforcing the order
is done through OrderBy operator, and this change shouldn't affect that.
Reviewers: florijan, msantl, buda
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1215
Summary:
Updating a record locally while there is an remote update waiting to be applied caused
the operation to return as already deleted, instead of applying it
Reviewers: florijan
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1226
Summary:
Previously, the network stack `communication::Server` accepted connections and
assigned them statically in a round-robin fashion to `communication::Worker`.
That meant that if two compute intensive connections were assigned to the same
worker they would block each other while the other workers would do nothing.
This implementation replaces `communication::Worker` with
`communication::Listener` which holds all accepted connections in one pool and
ensures that all workers execute all connections.
Reviewers: buda, florijan, teon.banek
Reviewed By: buda
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1220
Summary:
- Add `database::GraphDb::GetWorkerIds()`
- Change `CreateNode` constructor API
- Make `CreateNode` distribute nodes uniformly over workers
Did not yet modify `CreateExpand`, coming in the next diff.
Reviewers: teon.banek
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1216
Summary:
The queue size stat is updated every time we pop from queue.
This means it won't get updated if we get requests while all threads are
busy processing some long running request. I don't think we care about
the exact queue size in that case, so that is fine.
Reviewers: mferencevic
Reviewed By: mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1213
Summary:
Implementation of remote vertex and edge creation. This diff addresses
the creation API (`GraphDbAccessor::InsertEdge`,
`GraphDbAccessor::InsertRemoteVertex`) and the necessary RPC and
`RemoteCache` stuff.
What is missing for full remote creation support are
`query::plan::operator` changes that are expected to minor. Pushing this
diff as it's large enough, operator and end to end tests in the next.
Also, the naming of existing structures and files is confusing (update
refering to both updates and created, `results` used too often etc.). I
will address this too, but feel free to comment on bad naming.
Reviewers: dgleich, teon.banek, msantl
Reviewed By: dgleich
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1210
Summary:
This is still very much in progress. No advanced checks are done to
prevent planning unimplemented things. Basic Cartesian product should
work, for example `MATCH (a), (b) CREATE (a)-[:r]->(c)-[:r]->(b)`. But
anything more advanced may lead to undefined behaviour of the planner
and therefore execution. Use at your own risk!
Add ModifiedSymbols method to LogicalOperator
For planning Cartesian, we need information on which symbols are filled
by operator sub-trees. Currently, this is used to set symbols which
should be transferred over network. Later, they should be used to detect
whether filter expressions use symbols modified from Cartesian branches.
Then we will be able to ensure correct dependency of filters and their
behaviour.
Prepare DistributedPlan for multiple worker plans
Since Cartesian branches need to be split and handled by each worker, we
now dispatch multiple plans to workers.
Reviewers: florijan, msantl, buda
Reviewed By: florijan
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1208
