The query_v2_plan unit tests were needed in order to properly test if
the created logical plan of the new operator work properly. In order to
achieve this v2 versions of the several files were created, where the
old utilities were replaced with new ones, like query::v2 and
storage::v3. A new fake db accessor was also created in order to be able
to test the ScanAllByPrimaryKey operator.
Summary:
Store accumulated results as `communication::bolt::Value`s instead of
`TypedValue`s.
Add additional overloads for `Result` and `Summary` which accept `TypedValue`s
but internally perform conversions.
Reviewers: teon.banek, mferencevic
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D2514
Summary:
Identifiers would be printed correctly if they were printed as part of a larger
`Expression` (so the visitor did the printing). However, if `PrintObject` was
called with an `Identifier *` then it would delegate to the template overload
and just print the pointer.
Reviewers: mtomic, teon.banek
Reviewed By: mtomic
Subscribers: mferencevic, pullbot
Differential Revision: https://phabricator.memgraph.io/D1802
Summary:
This diff removes the need for a database when parsing a query and
creating an Ast. Instead of storing storage::{Label,Property,EdgeType}
in Ast nodes, we store the name and an index into all of the names. This
allows for easy creation of a map from {Label,Property,EdgeType} index
into the concrete storage type. Obviously, this comes with a performance
penalty during execution, but it should be minor. The upside is that the
query/frontend minimally depends on storage (PropertyValue), which makes
writing tests easier as well as running them a lot faster (there is no
database setup). This is most noticeable in the ast_serialization test
which took a long time due to start up of a distributed database.
Reviewers: mtomic, llugovic
Reviewed By: mtomic
Subscribers: mferencevic, pullbot
Differential Revision: https://phabricator.memgraph.io/D1774
Summary:
`Query` is now an abstract class which has `CypherQuery`,
`ExplainQuery`, `IndexQuery`, `AuthQuery` and `StreamQuery` as derived
classes. Only `CypherQuery` is forwarded to planner and the rest of the
queries are handled directly in the interpreter. This enabled us to
remove auth, explain and stream operators, clean up `Context` class and
remove coupling between `Results` class and plan cache. This should make
it easier to add similar functionality because no logical operator
boilerplate is needed. It should also be easier to separate community
and enterprise features for open source.
Remove Explain logical operator
Separate IndexQuery in AST
Handle index creation in interpreter
Remove CreateIndex operator and ast nodes
Remove plan cache reference from Results
Move auth queries out of operator tree
Remove auth from context
Fix tests, separate stream queries
Remove in_explicit_transaction and streams from context
Reviewers: teon.banek, mferencevic, msantl
Reviewed By: teon.banek, mferencevic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1664
Summary: Up till now, `AstStorage` also took care of tracking the root of the `Query` and loading of cloning of `Query` nodes would change that root. This felt out of place because sometimes `AstStorage` is used only for storing expressions, and we don't even have an entire query in the storage. This diff removes that feature from `AstStorage`. Now its only functionality is owning AST nodes and assigning unique IDs to them.
Reviewers: teon.banek, llugovic
Reviewed By: teon.banek
Subscribers: mferencevic, pullbot
Differential Revision: https://phabricator.memgraph.io/D1646
Summary:
This diff splits single node and distributed storage from each other.
Currently all of the storage code is copied into two directories (one single
node, one distributed). The logic used in the storage implementation isn't
touched, it will be refactored in following diffs.
To clean the working directory after this diff you should execute:
```
rm database/state_delta.capnp
rm database/state_delta.hpp
rm storage/concurrent_id_mapper_rpc_messages.capnp
rm storage/concurrent_id_mapper_rpc_messages.hpp
```
Reviewers: teon.banek, buda, msantl
Reviewed By: teon.banek, msantl
Subscribers: teon.banek, pullbot
Differential Revision: https://phabricator.memgraph.io/D1625
Summary:
TODO:
~~1. Figure out how to propagate exceptions during lambda evaluation to master.~~
~~2. Make some more complicated test cases to see if everything is~~
~~sent over the network properly (lambdas depending on frame, evaluation context).~~
~~3. Support only `GraphView::OLD`.~~
4. [MAYBE] Send only parts of the frame necessary for lambda evaluation.
~~5. Fix EdgeType handling~~
--------------------
Serialize frame and send it in PrepareForExpand RPC
Move Lambda out of ExpandVariable
Send symbol table and filter lambda in CreateBfsSubcursor RPC
Evaluate filter lambda during the expansion
Send evaluation context in CreateBfsSubcursor RPC
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1600
Summary:
In a bunch of places `TypedValue` was used where `PropertyValue` should be. A lot of times it was only because `TypedValue` serialization code could be reused for `PropertyValue`, only without providing callbacks for `VERTEX`, `EDGE` and `PATH`. So first I wrote separate serialization code for `PropertyValue` and put it into storage folder. Then I fixed all the places where `TypedValue` was incorrectly used instead of `PropertyValue`. I also disabled implicit `TypedValue` to `PropertyValue` conversion in hopes of preventing misuse in the future.
After that, I wrote code for `VertexAccessor` and `EdgeAccessor` serialization and put it into `storage` folder because it was almost duplicated in distributed BFS and pull produce RPC messages. On the sender side, some subset of records (old or new or both) is serialized, and on the reciever side, records are deserialized and immediately put into transaction cache.
Then I rewrote the `TypedValue` serialization functions (`SaveCapnpTypedValue` and `LoadCapnpTypedValue`) to not take callbacks for `VERTEX`, `EDGE` and `PATH`, but use accessor serialization functions instead. That means that any code that wants to use `TypedValue` serialization must hold a reference to `GraphDbAccessor` and `DataManager`, so that should make clients reconsider if they really want to use `TypedValue` instead of `PropertyValue`.
Reviewers: teon.banek, msantl
Reviewed By: teon.banek
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1598
Summary:
GraphDbAccessor is now constructed only through GraphDb. This allows the
concrete GraphDb to instantiate a concrete GraphDbAccessor. This allows
us to use virtual calls, so that the implementation may be kept
separate. The major downside of doing things this way is heap allocation
of GraphDbAccessor. In case it turns out to be a real performance
issues, another solution with pointer to static implementation may be
used.
InsertVertexIntoRemote is now a non-member function, which reduces
coupling. It made no sense for it to be member function because it used
only the public parts of GraphDbAccessor.
Reviewers: msantl, mtomic, mferencevic
Reviewed By: msantl
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1504
Summary:
Added test stream functionality. When a stream is configured, it will try to
consume messages from a kafka topic and return them back to the user.
For now, the messages aren't transformed, so it just returns the payload string.
Depends on D1466
Next steps are persisting stream metadata and transforming messages in order to
store them in the graph.
Reviewers: teon.banek, mtomic
Reviewed By: teon.banek
Subscribers: pullbot, buda
Differential Revision: https://phabricator.memgraph.io/D1474
Summary:
Integrated kafka library into memgraph. This version supports all opencypher
features and will only output messages consumed from kafka.
Depends on D1434
Next steps are persisting stream metadata and transforming messages in order to
store them in the graph.
Reviewers: teon.banek, mtomic, mferencevic, buda
Reviewed By: teon.banek
Subscribers: mferencevic, pullbot, buda
Differential Revision: https://phabricator.memgraph.io/D1466
Summary:
Added basic functionality for kafka streams. The `CREATE STREAM` clause is a
simplified version from the one mentioned in D1415 so we can start testing
end-to-end sooner.
This diff also includes a bug fix in `lcp.list ` for operators that have no
members.
Reviewers: teon.banek, mtomic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1434
Summary:
Hopefully, the mechanism of generating Cartesian is general enough, so
this simple change should work correctly in all cases.
Planner tests have been modified to use a FakeDbAccessor in order to
speed them up and potentially allow extracting planning into a library.
Reviewers: msantl, mtomic, buda
Reviewed By: mtomic
Subscribers: pullbot
Differential Revision: https://phabricator.memgraph.io/D1431
