github-repos/tinycc
1
0
Fork 0
mirror of https://github.com/mirror/tinycc.git synced 2024-12-28 04:00:06 +08:00
Code Issues Packages Projects Releases Wiki Activity
50b4f320dc
tinycc/i386-link.c
herman ten brugge 50b4f320dc lazy binding 
Currently tcc does not use lazy binding. It puts all relocations in the RELX
section and solve them all at startup.
This was not working on bsd.

tcc.h:
- New RELPLT_SECTION_FMT for plt relocations
- New entry relocplt in struct Section

tccelf.c:
- put_elf_reloca: put R_JMP_SLOT in relocplt section
- build_got_entries*: Use two passes because R_JMP_SLOT and R_GLOB_DAT
                      can not be intermixed on some targets (arm, arm64)
- layout_sections: Calculate correct size relocplt section for DT_ values.
                   Make sure relocplt is last
- fill_dynamic: Add DT_ values when got is filled
                move DT_VERSYM because dynamic linker cannot handle it standone
- Add note section for NetBSD

arm-link.c/arm64-link.c/i386-link.c/riscv64-link.c/x86_64-link.c:
- fill got table with pointer to plt section or symbol value in case
  of TCC_OUTPUT_MEMORY

arm-link.c/arm64-link.c:
- fix offset first plt entry

i386-link.c/x86_64-link.c:
- use correct reloc entry
- use relofs - sizeof (ElfW_Rel) because the reloc is already done

lib/bcheck.c:
- no __libc_freeres on FreeBSD and NetBSD

tests/Makefile:
- Add -fno-stack-protector for OpenBSD

tests/tests2/Makefile:
- disable 106_pthread/114_bound_signal
2020-12-18 15:24:32 +01:00

328 lines
9.9 KiB
C
Raw Blame History

#ifdef TARGET_DEFS_ONLY
#define EM_TCC_TARGET EM_386
/* relocation type for 32 bit data relocation */
#define R_DATA_32 R_386_32
#define R_DATA_PTR R_386_32
#define R_JMP_SLOT R_386_JMP_SLOT
#define R_GLOB_DAT R_386_GLOB_DAT
#define R_COPY R_386_COPY
#define R_RELATIVE R_386_RELATIVE
#define R_NUM R_386_NUM
#define ELF_START_ADDR 0x08048000
#define ELF_PAGE_SIZE 0x1000
#define PCRELATIVE_DLLPLT 0
#define RELOCATE_DLLPLT 1
#else /* !TARGET_DEFS_ONLY */
#include "tcc.h"
#ifndef ELF_OBJ_ONLY
/* Returns 1 for a code relocation, 0 for a data relocation. For unknown
relocations, returns -1. */
int code_reloc (int reloc_type)
{
switch (reloc_type) {
case R_386_RELATIVE:
case R_386_16:
case R_386_32:
case R_386_GOTPC:
case R_386_GOTOFF:
case R_386_GOT32:
case R_386_GOT32X:
case R_386_GLOB_DAT:
case R_386_COPY:
case R_386_TLS_GD:
case R_386_TLS_LDM:
case R_386_TLS_LDO_32:
case R_386_TLS_LE:
return 0;
case R_386_PC16:
case R_386_PC32:
case R_386_PLT32:
case R_386_JMP_SLOT:
return 1;
}
return -1;
}
/* Returns an enumerator to describe whether and when the relocation needs a
GOT and/or PLT entry to be created. See tcc.h for a description of the
different values. */
int gotplt_entry_type (int reloc_type)
{
switch (reloc_type) {
case R_386_RELATIVE:
case R_386_16:
case R_386_GLOB_DAT:
case R_386_JMP_SLOT:
case R_386_COPY:
return NO_GOTPLT_ENTRY;
case R_386_32:
/* This relocations shouldn't normally need GOT or PLT
slots if it weren't for simplicity in the code generator.
See our caller for comments. */
return AUTO_GOTPLT_ENTRY;
case R_386_PC16:
case R_386_PC32:
return AUTO_GOTPLT_ENTRY;
case R_386_GOTPC:
case R_386_GOTOFF:
return BUILD_GOT_ONLY;
case R_386_GOT32:
case R_386_GOT32X:
case R_386_PLT32:
case R_386_TLS_GD:
case R_386_TLS_LDM:
case R_386_TLS_LDO_32:
case R_386_TLS_LE:
return ALWAYS_GOTPLT_ENTRY;
}
return -1;
}
ST_FUNC unsigned create_plt_entry(TCCState *s1, unsigned got_offset, struct sym_attr *attr)
{
Section *plt = s1->plt;
uint8_t *p;
int modrm;
unsigned plt_offset, relofs;
/* on i386 if we build a DLL, we add a %ebx offset */
if (s1->output_type == TCC_OUTPUT_DLL)
modrm = 0xa3;
else
modrm = 0x25;
/* empty PLT: create PLT0 entry that pushes the library identifier
(GOT + PTR_SIZE) and jumps to ld.so resolution routine
(GOT + 2 * PTR_SIZE) */
if (plt->data_offset == 0) {
p = section_ptr_add(plt, 16);
p[0] = 0xff; /* pushl got + PTR_SIZE */
p[1] = modrm + 0x10;
write32le(p + 2, PTR_SIZE);
p[6] = 0xff; /* jmp *(got + PTR_SIZE * 2) */
p[7] = modrm;
write32le(p + 8, PTR_SIZE * 2);
}
plt_offset = plt->data_offset;
/* The PLT slot refers to the relocation entry it needs via offset.
The reloc entry is created below, so its offset is the current
data_offset */
relofs = s1->got->relocplt ? s1->got->relocplt->data_offset : 0;
/* Jump to GOT entry where ld.so initially put the address of ip + 4 */
p = section_ptr_add(plt, 16);
p[0] = 0xff; /* jmp *(got + x) */
p[1] = modrm;
write32le(p + 2, got_offset);
p[6] = 0x68; /* push $xxx */
write32le(p + 7, relofs - sizeof (ElfW_Rel));
p[11] = 0xe9; /* jmp plt_start */
write32le(p + 12, -(plt->data_offset));
return plt_offset;
}
/* relocate the PLT: compute addresses and offsets in the PLT now that final
address for PLT and GOT are known (see fill_program_header) */
ST_FUNC void relocate_plt(TCCState *s1)
{
uint8_t *p, *p_end;
if (!s1->plt)
return;
p = s1->plt->data;
p_end = p + s1->plt->data_offset;
if (s1->output_type != TCC_OUTPUT_DLL && p < p_end) {
add32le(p + 2, s1->got->sh_addr);
add32le(p + 8, s1->got->sh_addr);
p += 16;
while (p < p_end) {
add32le(p + 2, s1->got->sh_addr);
p += 16;
}
}
if (s1->got->relocplt) {
int mem = s1->output_type == TCC_OUTPUT_MEMORY;
ElfW_Rel *rel;
int x = s1->plt->sh_addr + 16 + 6;
p = s1->got->data;
for_each_elem(s1->got->relocplt, 0, rel, ElfW_Rel) {
int sym_index = ELFW(R_SYM)(rel->r_info);
ElfW(Sym) *sym = &((ElfW(Sym) *)symtab_section->data)[sym_index];
write32le(p + rel->r_offset, mem ? sym->st_value : x);
x += 16;
}
}
}
#endif
void relocate(TCCState *s1, ElfW_Rel *rel, int type, unsigned char *ptr, addr_t addr, addr_t val)
{
int sym_index, esym_index;
sym_index = ELFW(R_SYM)(rel->r_info);
switch (type) {
case R_386_32:
if (s1->output_type == TCC_OUTPUT_DLL) {
esym_index = get_sym_attr(s1, sym_index, 0)->dyn_index;
qrel->r_offset = rel->r_offset;
if (esym_index) {
qrel->r_info = ELFW(R_INFO)(esym_index, R_386_32);
qrel++;
return;
} else {
qrel->r_info = ELFW(R_INFO)(0, R_386_RELATIVE);
qrel++;
}
}
add32le(ptr, val);
return;
case R_386_PC32:
if (s1->output_type == TCC_OUTPUT_DLL) {
/* DLL relocation */
esym_index = get_sym_attr(s1, sym_index, 0)->dyn_index;
if (esym_index) {
qrel->r_offset = rel->r_offset;
qrel->r_info = ELFW(R_INFO)(esym_index, R_386_PC32);
qrel++;
return;
}
}
add32le(ptr, val - addr);
return;
case R_386_PLT32:
add32le(ptr, val - addr);
return;
case R_386_GLOB_DAT:
case R_386_JMP_SLOT:
write32le(ptr, val);
return;
case R_386_GOTPC:
add32le(ptr, s1->got->sh_addr - addr);
return;
case R_386_GOTOFF:
add32le(ptr, val - s1->got->sh_addr);
return;
case R_386_GOT32:
case R_386_GOT32X:
/* we load the got offset */
add32le(ptr, get_sym_attr(s1, sym_index, 0)->got_offset);
return;
case R_386_16:
if (s1->output_format != TCC_OUTPUT_FORMAT_BINARY) {
output_file:
tcc_error("can only produce 16-bit binary files");
}
write16le(ptr, read16le(ptr) + val);
return;
case R_386_PC16:
if (s1->output_format != TCC_OUTPUT_FORMAT_BINARY)
goto output_file;
write16le(ptr, read16le(ptr) + val - addr);
return;
case R_386_RELATIVE:
#ifdef TCC_TARGET_PE
add32le(ptr, val - s1->pe_imagebase);
#endif
/* do nothing */
return;
case R_386_COPY:
/* This relocation must copy initialized data from the library
to the program .bss segment. Currently made like for ARM
(to remove noise of default case). Is this true?
*/
return;
case R_386_TLS_GD:
{
static const unsigned char expect[] = {
/* lea 0(,%ebx,1),%eax */
0x8d, 0x04, 0x1d, 0x00, 0x00, 0x00, 0x00,
/* call __tls_get_addr@PLT */
0xe8, 0xfc, 0xff, 0xff, 0xff };
static const unsigned char replace[] = {
/* mov %gs:0,%eax */
0x65, 0xa1, 0x00, 0x00, 0x00, 0x00,
/* sub 0,%eax */
0x81, 0xe8, 0x00, 0x00, 0x00, 0x00 };
if (memcmp (ptr-3, expect, sizeof(expect)) == 0) {
ElfW(Sym) *sym;
Section *sec;
int32_t x;
memcpy(ptr-3, replace, sizeof(replace));
rel[1].r_info = ELFW(R_INFO)(0, R_386_NONE);
sym = &((ElfW(Sym) *)symtab_section->data)[sym_index];
sec = s1->sections[sym->st_shndx];
x = sym->st_value - sec->sh_addr - sec->data_offset;
add32le(ptr + 5, -x);
}
else
tcc_error("unexpected R_386_TLS_GD pattern");
}
return;
case R_386_TLS_LDM:
{
static const unsigned char expect[] = {
/* lea 0(%ebx),%eax */
0x8d, 0x83, 0x00, 0x00, 0x00, 0x00,
/* call __tls_get_addr@PLT */
0xe8, 0xfc, 0xff, 0xff, 0xff };
static const unsigned char replace[] = {
/* mov %gs:0,%eax */
0x65, 0xa1, 0x00, 0x00, 0x00, 0x00,
/* nop */
0x90,
/* lea 0(%esi,%eiz,1),%esi */
0x8d, 0x74, 0x26, 0x00 };
if (memcmp (ptr-2, expect, sizeof(expect)) == 0) {
memcpy(ptr-2, replace, sizeof(replace));
rel[1].r_info = ELFW(R_INFO)(0, R_386_NONE);
}
else
tcc_error("unexpected R_386_TLS_LDM pattern");
}
return;
case R_386_TLS_LDO_32:
case R_386_TLS_LE:
{
ElfW(Sym) *sym;
Section *sec;
int32_t x;
sym = &((ElfW(Sym) *)symtab_section->data)[sym_index];
sec = s1->sections[sym->st_shndx];
x = val - sec->sh_addr - sec->data_offset;
add32le(ptr, x);
}
return;
case R_386_NONE:
return;
default:
fprintf(stderr,"FIXME: handle reloc type %d at %x [%p] to %x\n",
type, (unsigned)addr, ptr, (unsigned)val);
return;
}
}
#endif /* !TARGET_DEFS_ONLY */
Reference in New Issue View Git Blame Copy Permalink