Allows to create dynamic executables, using the code path
for TCC_OUTPUT_DLL but add an .interp header (plus a FLAGS_1
entry in the dynamic section to make 'readelf' say "PIE")
Introduces TCC_OUTPUT_DYN as alias for TCC_OUTPUT_DLL.
There is no runtime option, only one to configure:
./configure --config-pie
100 insertions(+), 76 deletions(-)
The new gcc12 release does not support stabs any more.
This was a good reason to add support for dwarf.
The stabs code still works and is used if configure option --dwarf
is not used.
Tested on x86_64, i386, arm, arm64, riscv64 with dwarf-5.
Some debuggers may not support dwarf-5. Try using older dwarf versions
i that case.
The tccmacho.c code probably need some support for dwarf.
arm-gen.c, arm64-gen.c, i386-gen.c, riscv64-gen.c, x86_64-gen.
- fix get_sym_ref symbol size
arm-link.c, arm64-link.c, i386-link.c, riscv64-link.c, x86_64-link.c
- add R_DATA_32U
libtcc.c:
- parse -gdwarf option
tcc.c:
- add dwarf option
tcc.h:
- add dwarf option and sections
tccelf.c:
- init dwarf sections
- avoid adding sh_addr for dwarf sections
- remove dwarf relocs for output dll
- add dwarf sections for tccrun
tccgen.c:
- add dwarf defines + global data
- add dwarf_* functions
- mix dwarf code with stabs code
- a trick is used to emit function name in .debug_line section so
only this section has to be parsed instead of .debug_info and
.debug_abbrev.
- fix init debug_modes
tccrun.c:
- add dwarf sections in rt_context
- init them in tcc_run
- add new dwarf code rt_printline_dwarf to find file/function
dwarf.h:
- New file
tcc-doc.texi:
- document dwarf
configure:
- add dwarf option
lib/Makefile
- change -gstabs into -gdwarf
lib/bt-exe.c, tests/tests2/Makefile, tests/tests2/126_bound_global:
- Add __bound_init call
- Add new testcase to test it
libtcc.c: add -Wwrite-strings to -Wall
tccgen.c: ro float-consts, string-consts, ro arrays if base type is
tccpe.c: merge IAT with rodata
tccrun.c: mprotect rodata accordingly. free section data after copy
x86_64.c: do not use got for static data.
tcc -bench: show data.rw/ro
Probably STB_LOCAL should never get to put_got_entry(), and currently
it doesn't seem to happen (See "Hack Alarm" there)
Other files: use more ro-data in tinycc
tccgen.c: debug_modes
- don't waste debug function calls during normal execution.
libtcc.c:
- mem_debug: no C99 features in tcc please, for example
({compound expressions}): do not use.
tccgen.c: struct_layout:
- unaligned access is completely ok for most targets.
- Moreover the patch was triggering single byte mode even
for normal aligned access (as with tcc's SymAttr)
static Sym label: don't do this
arm-gen.c:
- use some #ifdefs to explain some code
tccpp.c:
- cleanup UCN chars
libtcc.c:
- replace openbsd library search
configure:
- cleanup strip fallouts
tccgen.c:
- expr_cond(): remove an exotic optimization that eventually
got fixed to do the contrary by a gv(RC_InT)
- pop_local_syms(): remove some args
- init_putv() : use write##le functions to avoid cross-compiler
unaligned access
- __bt_init(): remove unused param 'mode'
I have implemented the -ftest-coverage option. It works a bit different
from the gcc version. It output .tcov text file which looks almost the
same as a gcov file after a executable/so file is run.
Add lib/tcov.c file
Modify Makefiles to compile/install it
Add -ftest-coverage option in tcc.c/tcc.h/tcc-doc.texi
Add code to tccelf.c/tccgen.c/tccpe.c
Add gen_increment_tcov to tcc.h/*gen.c
unrelated changes:
Add sigemptyset in tccrun.c
Fix riscv64-gen.c tok_alloc label size
Disable warning softfloat. OpenBSD works fine.
save/restore s0-s15 during memcpy call for structs
update configure script. Works now on raspberry pi/All BSD
Add eabi_mem.. functions in armeabi.c for OpenBSD
Fix fp register in tccrun.c for OpenBSD
Support OpenBSD/FreeBSD/NetBSD on asm.
move PAGESIZE to tcc.h and use _SC_PAGESIZE (netbsd/arm has 8192 pagesize)
arm:
- fix cmp instruction for qemu (raspberry pi works without patch?)
- increase start address/size
- use large plt size
- add return R_ARM_PREL31
- add R_ARM_TARGET1 to prepare_dynamic_rel
- add gcc_s to FreeBSD (unwind code)
- do not use __clear_cache on bsd (sometimes bad system call)
- do stack unwinding on bsd
- test/tcctest.c: use %lld %llu on bsd
moved target_machine defines to the <target>-gen.c files.
Also:
- c2str.c moved into conftest.c
- tccdefs.h ; defined(__TINYC__) && !defined(_LOCORE) removed
(in tinycc __TINYC__ is always defined and _LO... is never.)
- stddef.h : too many #ifdefs, removed
- tccgen.c:stabs: support win32 long doubles aka doubles.
- win32: math.h/tcc_libm.h: fix pointer mismatch in modfl
- tccpp.c: increment include_stack_ptr after the file was
actually found otherwise it would print
"in file included from <itself>: file not found..."
tcc_define_symbol(): now only for -D on command line
include/tccdefs.h: converted to strings and compiled into
the tcc executable. Can be disabled with
./configure --config-predefs=no
In this case include/tccdefs.h is loaded at runtime. This is
default for other build-methods (build-tcc.bat) also (to avoid
some complexity).
Also:
- lib/Makefile: fix typo
- tcc.h : avoid _strto(u)i64 (for TCC on WIN98/2K)
- tccpp.h:cstr_printf() : workaround incompatible vsnprintf's
(generally faster too)
tcc.h, tccgen.c: Introduce Sym *external_helper_sym(int v);
to create an external reference with no specific type. This
avoids type conflicts if the symbol is used from C too.
the other files: use it.
tccgen.c:
- Fix 'tcc -b conftest.s'
- Add offset during bound checking for struct return
lib/bcheck.c:
- Check overlap when reusing vla/alloca
arm-gen.c:
arm64-gen.c:
riscv64-gen.c:
lib/alloca86-bt.S:
- add space for vla/alloca during bound checking
tests/tests2/Makefile:
tests/tests2/121_struct_return:
tests/tests2/122_vla_reuse:
- New test cases with bound checking enabled to test vla and struct return
tccgen.c:
- cleanup __builtin_... stuff
- merge __attribute((alias("sym"))) with __asm__("sym")
Now one cannot have both, however for alias underscores are
added if enabled. For __asm__ they aren't.
tccpp.c:
- extend tcc_predefs accordingly. Was generated with
'cd tests/misc && tcc -run c2str.c tcc_predef.h tcc_predefs'
xxx-gen.c:
- move bcheck setjmp test to tccgen.c:gbound_args()
i386-gen.c:
- create win32 compatible stack space for big structures
tcctest.c:
- some cleanup + nicer output
- configure/Makefile : cleanup, really use CC_NAME
- tccasm.c : remove C99 construct that MSVC doesn't compile
- arm-gen.c, x86_64-gen.c, riscv64-gen.c, tccmacho.c : ditto
- arm64-gen.c: commit 383acf8eff wrote:
"Instead of a cast, it would be better to pass the exact type."
It is true that there are better solutions but it is not
passing the exact type (I think).
- tcctest.c: revert "fix cast test for clang" 03646ad46f
this obviously wants to test non-portable conversions
- 114_bound_signal.test: clock_nanosleep is too new for older
linuxes, just use sleep() instead
Checked on:
- i386/x86_64 (linux/windows)
- arm/arm64 (rapberry pi)
- riscv64 (simulator)
Not tested for arm softfloat because raspberry pi does not support it.
Modifications:
Makefile:
add arm-asm.c to arm64_FILES
add riscv64-asm.c (new file) to riscv64_FILES
lib/Makefile:
add fetch_and_add_arm.o(new file) to ARM_O
add fetch_and_add_arm64.o(new file) to ARM64_O
add fetch_and_add_riscv64.o(new file) to RISCV64_O
add $(BCHECK_O) to OBJ-arm/OBJ-arm64/OBJ-riscv64
tcc.h:
Enable CONFIG_TCC_BCHECK for arm32/arm64/riscv64
Add arm-asm.c, riscv64-asm.c
tcctok.h:
for arm use memmove4 instead of memcpy4
for arm use memmove8 instead of memcpy8
tccgen.c:
put_extern_sym2: for arm check memcpy/memmove/memset/memmove4/memmove8
only use alloca for i386/x86_64
for arm use memmove4 instead of memcpy4
for arm use memmove8 instead of memcpy8
fix builtin_frame_address/builtin_return_address for arm/riscv64
tccrun.c:
Add riscv64 support
fix rt_getcontext/rt_get_caller_pc for arm
tccelf.c:
tcc_load_dll: Print filename for bad architecture
libtcc.c:
add arm-asm.c/riscv64-asm.c
tcc-doc.texi:
Add arm, arm64, riscv64 support for bound checking
lib/bcheck.c:
add __bound___aeabi_memcpy/__bound___aeabi_memmove
__bound___aeabi_memmove4/__bound___aeabi_memmove8
__bound___aeabi_memset for arm
call fetch_and_add_arm/fetch_and_add_arm64/fetch_and_add_riscv64
__bound_init: Fix type for start/end/ad
__bound_malloc/__bound_memalign/__bound_realloc/__bound_calloc: Use size + 1
arm-gen.c:
add bound checking code like i386/x86_64
assign_regs: only malloc if nb_args != 0
gen_opi/gen_opf: Fix reload problems
arm-link.c:
relocate_plt: Fix address calculating
arm64-gen.c:
add bound checking code like i386/x86_64
load/store: remove VT_BOUNDED from sv->r
arm64_hfa_aux/arm64_hfa_aux: Fix array code
gfunc_prolog: only malloc if n != 0
arm64-link.c:
code_reloc/gotplt_entry_type/relocate: add R_AARCH64_LDST64_ABS_LO12_NC
relocate: Use addXXle instead of writeXXle
riscv64-gen.c:
add bound checking code like i386/x86_64
add NB_ASM_REGS/CONFIG_TCC_ASM
riscv64-link.c:
relocate: Use addXXle instead of writeXXle
i386-gen.c/x86_64-gen.c
gen_bounds_epilog: Fix code (unrelated)
tests/Makefile:
add $(BTESTS) for arm/arm64/riscv64
tests/tests2/Makefile:
Use 85 only on i386/x86_64 because of asm code
Use 113 only on i386/x86_64 because of DLL code
Add 112/114/115/116 for arm/arm64/riscv64
Fix FILTER (failed on riscv64)
tests/boundtest.c:
Only use alloca for i386/x86_64
from 3e731e3a78
tccgen.c:
- make 'struct default_debug' const
- pass TCCState* as parameter to tcc_debug_xxx functions
- always check tcc_state->do_debug before calling functions
- factor out tcc_debug_extern_sym()
- remove formats "%lld"/"%llu" (not reliable on windows)
xxx-gen files:
- set func_vt/var from caller
This makes it possible to get backtraces with executables
(including DLLs/SOs) like we had it already with -g -run.
Option -b includes -bt, and -bt includes -g.
- new file lib/bt-exe.c: used to link rt_printline and the
exception handler from tccrun.c into executables/DLLs.
- new file lib/bt-log.c: provides a function that may be
called from user code to print out a backtrace with a
message (currently for i386/x86_64 only):
int (*tcc_backtrace)(const char *fmt, ...);
As an extra hack, if 'fmt' is prefixed like "^file.c^..."
then the backtrace will skip calls from within 'file.c'.
- new file lib/bt-dll.c: used on win32 to link the backtrace
and bcheck functions with the main module at runtime
- bcheck.c: now uses the tcc_backtrace function from above
- tccgen.c: minor cleanups
- tccelf.c: stab sections get SHF_ALLOC for easy access.
Also in relocate_section(): 64bit relocations for stabs
in DLLs cannot work. To find DLL addresses, the DLL base
is added manually in tccrun.c via rc.prog_base instead.
- tccpe.c: there are some changes to allow merging sections,
used to merge .finit_array into .data in the first place.
- tccpp.c: tcc -run now #defines __TCC_RUN__
also: refactor a line in tal_realloc that was incompatible
with bcheck
- tcctest.c: fixed a problem with r12 which tcc cannot preserve
as well as gcc does.
- tests2/112_backtrace.c: test the feature and the bcheck test18
that previously was in boundtest.c
This allows creation of TCCStates and operation with API
calls independently from each other, even from threads.
Frontend (option parsing/libtcc.c) and backend (linker/tccelf.c)
now depend only on the TCCState (s1) argument.
Compilation per se (tccpp.c, tccgen.c) is still using
globals for convenience. There is only one entry point
to this section which is tcc_compile() which is protected
by a semaphore.
There are some hacks involved to avoid too many changes,
as well as some changes in order to avoid too many hacks ;)
The test libtcc_test_mt.c shows the feature. Except this
new file the patch adds 87 lines overall.
A more automatic approach to code suppression (aka. nocode_wanted)
The simple rules are:
- Clear 'nocode_wanted' at (im/explicit) label IF it was used
- Set 'nocode_wanted' after unconditional jumps
Also in order to test this then I did add the "function might
return no value" warning, and then to make that work again I
did add the __attribute__((noreturn)).
Also moved the look ahead label check into the type parser
to gain a little speed.
In gfunc_call, regisger will be saved before gcall_or_jmp. The register
stored the function will be saved too, though in some generator the SValue
of this function will be immediately poped after gcall_or_jmp, and no need to be saved. So I modify some generator to avoid save redundant SValue before gcall_or_jmp.
which requires being able to emit an arbitrary number of NOP
instructions, which is also implemented here. For x86 we
could emit other sequences but these are the easiest.
tcc.h:
* cleanup struct 'Sym'
* include some 'Attributes' into 'Sym'
* in turn get rid of VT_IM/EXPORT, VT_WEAK
* re-number VT_XXX flags
* replace some 'long' function args by 'int'
tccgen.c:
* refactor parse_btype()
- configure:
- add --config-uClibc,-musl switch and suggest to use
it if uClibc/musl is detected
- make warning options magic clang compatible
- simplify (use $confvars instead of individual options)
- Revert "Remove some unused-parameter lint"
7443db0d5f
rather use -Wno-unused-parameter (or just not -Wextra)
- #ifdef functions that are unused on some targets
- tccgen.c: use PTR_SIZE==8 instead of (X86_64 || ARM64)
- tccpe.c: fix some warnings
- integrate dummy arm-asm better
* tccgen: re-allow long double constants for x87 cross
sizeof (long double) may be 12 or 16 depending on host platform
(i386/x86_64 on unix/windows).
Except that it's 8 if the host is on windows and not gcc
was used to compile tcc.
* win64: fix builtin_va_start after VT_REF removal
See also a8b83ce43a
* tcctest.c: remove outdated limitation for ll-bitfield test
It always worked, there is no reason why it should not work
in future.
* libtcc1.c: exclude long double conversion on ARM
* Makefile: remove CFLAGS from link recipes
* lib/Makefile: use target DEFINES as passed from main Makefile
* lib/armflush.c lib/va_list.c: factor out from libtcc1.c
* arm-gen.c: disable "depreciated" warnings for now
since configure supports only native configuration
a file 'cross-tcc.mak' needs to be created manually.
It is included in the Makefile if present.
# ----------------------------------------------------
# Example config-cross.mak:
#
# windows -> i386-linux cross-compiler
# (it expects the linux files in <prefix>/i386-linux)
ROOT-i386 = {B}/i386-linux
CRT-i386 = $(ROOT-i386)/usr/lib
LIB-i386 = $(ROOT-i386)/lib:$(ROOT-i386)/usr/lib
INC-i386 = {B}/lib/include:$(ROOT-i386)/usr/include
DEF-i386 += -D__linux__
# ----------------------------------------------------
Also:
- use libtcc1-<target>.a instead of directories
- add dummy arm assembler
- remove include dependencies from armeabi.c/lib-arm64.c
- tccelf/ld_add_file: add SYSROOT (when defined) to absolute
filenames coming from ld-scripts
- tccgen.c/tcc.h: allow function declaration after use:
int f() { return g(); }
int g() { return 1; }
may be a warning but not an error
see also 76cb1144ef
- tccgen.c: redundant code related to inline functions removed
(functions used anywhere have sym->c set automatically)
- tccgen.c: make 32bit llop non-equal test portable
(probably not on C67)
- dynarray_add: change prototype to possibly avoid aliasing
problems or at least warnings
- lib/alloca*.S: ".section .note.GNU-stack,"",%progbits" removed
(has no effect)
- tccpe: set SizeOfCode field (for correct upx decompression)
- libtcc.c: fixed alternative -run invocation
tcc "-run -lxxx ..." file.c
(meant to load the library after file).
Also supported now:
tcc files ... options ... -run @ arguments ...
tccgen.c: remove any 'nocode_wanted' checks, except in
- greloca(), disables output elf symbols and relocs
- get_reg(), will return just the first suitable reg)
- save_regs(), will do nothing
Some minor adjustments were made where nocode_wanted is set.
xxx-gen.c: disable code output directly where it happens
in functions:
- g(), output disabled
- gjmp(), will do nothing
- gtst(), dto.
C standard specifies that array should be declared with a non null size
or with * for standard array. Declaration of relocs_info in tcc.h was
not respecting this rule. This commit add a R_NUM macro that maps to the
R_<ARCH>_NUM macros and declare relocs_info using it. This commit also
moves all linker-related macros from <arch>-gen.c files to <arch>-link.c
ones.
