-*-text-*- ------------------------------------------------------------------------------- Copyright (C) 2002-2022 Free Software Foundation, Inc. This file is part of GNU Make. GNU Make is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . ------------------------------------------------------------------------------- Obtaining Git Code ------------------ This seems redundant, since if you're reading this you most likely have already performed this step; however, for completeness, you can obtain the GNU make source code via Git from the FSF's Savannah project : $ git clone git://git.savannah.gnu.org/make.git Changes using Git ----------------- If you do not have push privileges to the GNU make Git repository, see the README file section "Submitting Patches" for information. If you have push privileges to the GNU make Git repository keep this information in mind: Starting with GNU make 4.0 we no longer keep a separate ChangeLog file in source control. We use the Gnulib git-to-changelog conversion script to convert the Git comments into ChangeLog-style entries for release. As a result, please format your Git comments carefully so they will look clean after conversion. In particular, each line of your comment will have a TAB added before it so be sure your comment lines are not longer than 72 characters; prefer 70 or less. Please use standard ChangeLog formats for your commit messages (sans the leading TAB of course). Rule #1: Don't rewrite pushed history (don't use "git push --force"). Typical simple workflow might be: * Edit files / make / make check * Use "git status" and "git diff" to verify your changes * Use "git add" to stage the changes you want to make * Use "git commit" to commit the staged changes to your local repository * Use "git pull" to accept & merge new changes from the Savannah repository * Use "git push" to push your commits back to the Savannah repository For Emacs users, there are many options for Git integration but I strongly recommend the Magit package: https://www.emacswiki.org/emacs/Magit It makes the workflow much clearer, and has advanced features such as constructing multiple commits from various files and even from different diff chunks in the same file. There is a video available which helps a lot. Coding Standards ---------------- GNU make code adheres to the GNU Coding Standards. Please use only spaces and no TAB characters in source code. Additionally, GNU make is a foundational bootstrap package for the GNU project; as such it is conservative about language features it expects. However, GNU make does rely on the Gnulib portability library, and Gnulib currently requires a ISO C99 compiler. So features in ISO C99 can be assumed. Building From Git for POSIX --------------------------- To build GNU make from Git on POSIX systems such as GNU/Linux, you will need to install the following extra software: * autoconf * automake >= 1.16.1 * gettext * autopoint * pkg-config * texinfo (for makeinfo) * GCC * GNU make (POSIX make is not sufficient) And any tools that those utilities require (GNU m4, etc.) To run the tests you must install Perl. To build a release you'll need to install lzip. GNU make requires Gnulib to provide some facilities. If you want to maintain a local installation of gnulib you can set GNULIB_SRCDIR to point to it. Otherwise, ./bootstrap will obtain a clone for you. Unfortunately due to issues with gnulib's getloadavg, you must have automake 1.16.1 or above. This version may not yet be available through GNU/Linux package managers. If you need to install from source be sure to set ACLOCAL_PATH to point to the pkg-config location (e.g., /usr/share/aclocal). If you want to build from Git with a non-GCC compiler, add "MAKE_CFLAGS=" to your make command line (or at least remove any flags your compiler does not support). When building from Git you must build in the source directory: "VPATH builds" from remote directories are not supported. Once you've created a distribution, of course, you can unpack it and do a VPATH build from there. After checking out the code, you will need to run the bootstrap script: $ ./bootstrap At this point you have successfully brought your Git copy of the GNU make source directory up to the point where it can be treated more-or-less like the official package you would get from ftp.gnu.org. That is, you can just run: $ ./configure $ make check to build and test GNU make. NOTE! This method builds GNU make in "maintainer mode". Make programs built in this mode it will be slower, possibly MUCH slower: there are various sanity checks enabled. Further this mode assumes a modern GCC, GNU libc, and well-formed system headers and enables a high level of warnings AND enables -Werror to turn warnings into failures. If you want to build from Git with "maintainer mode" disabled, add "MAKE_MAINTAINER_MODE=" to the make command line. If you want to turn off the extra warning flags, add "MAKE_CFLAGS=" to the make command line. For example: $ ./configure $ make check MAKE_MAINTAINER_MODE= MAKE_CFLAGS= $ make install Building From Git for Windows ----------------------------- If you have a UNIX emulation like CYGWIN you can opt to run the general build procedure above; it will work. Consult README.W32.template for information on options you might want to use when running ./configure. If you can't or don't want to do that, then first run the .\bootstrap.bat script to prime your Git workspace: > .\bootstrap.bat Next, rename the file README.W32.template to README.W32 and follow those instructions. Note, neither of these methods are tested regularly by the GNU make maintainers. Building for Windows from a distribution tarball IS tested regularly. Debugging and Testing --------------------- These instructions have been tested on GNU systems. I have no idea if they work on non-GNU systems (Windows, MacOS, etc.) * Alternate Configurations: The maintMakefile has a rule for running configure with various different options, with and without packages. Run: make check-alt-config * Valgrind: You can run all tests under valgrind by passing the -memcheck option: (cd tests && ./run_make_tests -make ../make -memcheck) Note, this is slow! Also some tests will fail because of invoking valgrind. * ASAN: You can build with ASAN and run tests, like this: make clean make -j8 CFLAGS='-ggdb3 -fsanitize=address' LDFLAGS='-ggdb3 -fsanitize=address' (cd tests && ./run_make_tests -make ../make) Note that ASAN is reporting many more errors than valgrind. I don't know which one is wrong: I haven't looked at them closely. Creating a Package ------------------ Once you have performed the above steps (including the configuration and build) you can create a GNU make package. This is very simple, just run: $ make dist-gzip and, if you like: $ make dist-lzip Even better, you should run this: $ make distcheck Which will build both .gz and .lz package files, then unpack one into a temporary location, try to build it and repack it, then verifying that everything works, you get the same results, _and_ no extraneous files are left over after the "distclean" rule. This package can be unpacked and built to give a "normal" (non-maintainer mode) result. Steps to Release ---------------- Here are the things that need to be done (in more or less this order) before making an official release. If something breaks such that you need to change code, be sure to start over again sufficiently that everything is consistent (that's why we don't finalize the Git tag, etc. until the end). * Update the configure.ac file with the new release number. * Update the EDITION value in the doc/make.texi file. * Update the NEWS file with the release number and date. * Ensure the Savannah bug list URL in the NEWS file uses the correct "Fixed Release" ID number. * Run "make distcheck" to be sure it all works. * Run "make check-alt-config" to be sure alternative configurations work * Run "make update-makeweb" to get a copy of the GNU make web pages * Run "make update-gnuweb" to get a copy of the GNU website boilerplate pages * Update the web page boilerplate if necessary: ../gnu-www/www/server/standards/patch-from-parent ../make-web/make.html \ ../gnu-www/www/server/standards/boilerplate.html * Run "make gendocs" (requires gnulib) to generate the manual files for the GNU make web pages. * Follow the directions from gendocs for the web page repository * run "make tag-release" to create a Git tag for the release * Push everything: git push --tags origin master Manage the Savannah project for GNU make: >>> This is only for real releases, not release candidate builds <<< * In Savannah modify the "Value", "Rank", and "Description" values for the current "SCM" entry in both "Component Version" and "Fix Release" fields to refer to the new release. The "Rank" field should be 10 less than the previous release so it orders properly. * In Savannah create a new entry for the "Component Version" and "Fix Release" fields: - Value: SCM - Rank: 20 - Descr: Issues found in code retrieved from Source Code Management (Git), rather than a distributed version. Please include the SHA you are working with. - Descr: Fixed in Source Code Management (Git). The fix will be included in the next release of GNU make. Start the next release: * Update configure.ac and add a ".90" to the release number. * Update the NEWS file with a new section for the release / date. * Update the Savannah URL for the bugs fixed in the NEWS section. Publishing a Package -------------------- In order to publish a package on the FSF FTP site, either the release site ftp://ftp.gnu.org, or the prerelease site ftp://alpha.gnu.org, you first need to have my GPG private key and my passphrase to unlock it. And, you can't have them! So there! But, just so I remember here's what to do: Make sure the "Steps to Release" are complete and committed and tagged. git clone git://git.savannah.gnu.org/make.git make-release cd make-release make upload-alpha # for alpha.gnu.org (pre-releases) -OR- make upload-ftp # for ftp.gnu.org (official releases) Depending on your distribution (whether GnuPG is integrated with your keyring etc.) it will either pop up a window asking for your GPG key passphrase one time, or else it will use the CLI to ask for the GPG passphrase _THREE_ times. Sigh. For both final releases and pre-releases, send an email with the URL of the package to the GNU translation robot to allow the translators to work on it: Where to Announce ----------------- Create the announcement in a text file, using 'git shortlog', then sign it with GPG: gpg --clearsign Or, use your mail client's PGP/GPG signing capabilities. Announce the release: * For release candidate builds: To: bug-make@gnu.org CC: coordinator@translationproject.org BCC: help-make@gnu.org, make-w32@gnu.org, make-alpha@gnu.org * For release builds To: info-gnu@gnu.org, bug-make@gnu.org CC: coordinator@translationproject.org BCC: help-make@gnu.org, make-w32@gnu.org, make-alpha@gnu.org * Add a news item to the Savannah project site. * Add an update to freecode.com (nee freshmeat.net) Appendix A - For The Brave -------------------------- For those of you who trust me implicitly, or are just brave (or foolhardy), here is a canned sequence of commands to build a GNU make distribution package from a virgin Git source checkout (assuming all the prerequisites are available of course). This list is eminently suitable for a quick swipe o' the mouse and a swift click o' mouse-2 into an xterm. Go for it! For a debugging version: ./bootstrap && ./configure CFLAGS=-g && make check For a release version ./bootstrap && ./configure && make check