Delay the generation of error messages for included files until we
are sure that we can't rebuild that included file.
* dep.h (struct dep): Don't reuse "changed"; make a separate field
to keep "flags". Get rid of dontcare and use the flag.
(struct goaldep): Create a new structure for goal prereqs
that tracks an errno value and the floc where the include happened.
Rework the structures to ensure they are supersets as expected.
In maintainer mode with GCC, use inline to get type checking.
* read.c (eval_makefile): Return a struct goaldep for the new
makefile. Ensure errno is set properly to denote a failure.
(read_all_makefiles): Switch to goaldep and check errno.
(eval): Don't show included file errors; instead remember them.
* remake.c (update_goal_chain): Set global variables to the current
goaldep we're building, and the entire chain.
(show_goal_error): Check if the current failure is a consequence
of building an included makefile and if so print an error.
(complain): Call show_goal_error() on rule failure.
* job.c (child_error): Call show_goal_error() on child error.
* main.c (main): Switch from struct dep to goaldep.
* misc.c (free_dep_chain): Not used; make into a macro.
* tests/scripts/features/include: Update and include new tests.
* tests/scripts/options/dash-B, tests/scripts/options/dash-W,
tests/scripts/options/print-directory,
tests/scripts/variables/MAKE_RESTARTS: Update known-good-output.
Previously if the jobserver was active, MAKEFLAGS would contain only
the -j option but not the number (not -j5 or whatever) so users
could not discover that value. Allow that value to be provided in
MAKEFLAGS without error but still give warnings if -jN is provided
on the command line if the jobserver is already activated.
* NEWS: Discuss the new behavior.
* os.h, posixos.c, w32/w32os.c: Return success/failure from
jobserver_setup() and jobserver_parse_auth().
* main.c (main): Separate the command line storage of job slots (now
in arg_job_slots) from the control storage (in job_slots). Make a
distinction between -jN flags read from MAKEFLAGS and those seen
on the command line: for the latter if the jobserver is enabled then
warn and disable it, as before.
* tests/scripts/features/jobserver: Add new testing.
* NEWS: Mention the change.
* main.c: Rename jobserver_fds variable to jobserver_auth and
--jobserver-fds option to --jobserver-auth.
* os.h, posixos.c, w32/w32os.c: Rename jobserver_parse_arg() and
jobserver_get_arg() to jobserver_parse_auth()/jobserver_get_auth().
* main.c (main): Pre-define .LOADED as a default-level variable.
* load.c (load_file): Set the value rather than append it. Avoid
adding an extra initial whitespace.
* tests/scripts/features/load: Run with --warn-undefined-variables.
Newer versions of binutils allow ar to be compiled to generate
"deterministic archives" by default: in this mode no timestamp
information is generated in the static archive, which utterly
breaks GNU make's archive updating capability. Debian and Ubuntu
have turned this feature on by default in their distributions
which causes the regression tests to fail.
Update the regression tests to check for the availability of the
"U" option to ar which disables deterministic archives and allows
GNU make's archive support to work properly again.
Upated to match change to run_make_tests and some future fixes to
make on VMS.
* arscan.c: Use ANSI compatible pragmas instead of VAX C extensions.
* tests/scripts/features/archives: Fix tests to use VMS rules and
answers when running on VMS and using DCL as a shell.
* tests/scripts/features/vpath3: Fix epected answer on test when
run on VMS.
* tests/scripts/vms/library: (New) Test the VMS library rules that
are not tested by existing tests.
* tests/config-flags.pm.in: A new file containing variable assignments
for the test suite; these variables are set by configure to contain
the values detected there for compilers, flags, etc.
* tests/run_make_tests.pl: Require the config-flags.pm file
* tests/scripts/features/load, tests/scripts/features/loadapi: Use the
configure-provided values when building the shared test library.
* configure.ac: Replace tests/config-flags.pm.in
* Makefile.am: Make sure tests/config-flags.pm is up to date
Expand the characters which are legal in a function name, and check
the name for validity. Create a type for the function pointer.
Convert the last argument from a boolean to flags, to allow for expansion.
Don't dup stdout into stderr in the test suite.
Don't rely on $port_type eq "UNIX" to mean case-preserving.
Check against the real output of ar when creating archives.
In this mode we still collect all the output from a given target and
dump it at once. However we don't treat recursive lines any differently
from non-recursive lines. Also we don't print enter/leave messages
after every dump. However we do ensure that we always print them once
to stdout, so the parent make will collect it properly.
Create a new file, output.c, and collect functions that generate output there.
We introduce a new global context specifying where output should go (to stdout
or to a sync file), and the lowest level output generator chooses where to
write output based on that context.
This allows us to set the context globally, and all operations that write
output (including functions like $(info ...) etc.) will use it.
Removed the "--trace=dir" capability. It was too confusing. If you have
directory tracking enabled then output sync will print the enter/leave message
for each synchronized block. If you don't want that, disable directory
tracking.
We tried to get some efficiency by avoiding a parse_file_seq() for simple
pattern prerequisites, but this also means no wildcard expansion was
happening, so add it back. Add regression tests for wildcards in target and
prerequisite lists.
This mode replaces the previous heuristic setting enabled with -O, where we
would log directory enter/leave for each synchronized output. Now we only
do that if --trace=dir is given.
If output-sync is enabled, have make write the command line to the temp file
instead of printing it directly to the screen to ensure that the output is
ordered properly. Also, remove extraneous enter/leave operations by having
them printed directly when dumping temp file output.
If we are not going to sync a command line then dump any collected output
first to preserve ordering. Do some code cleanup:
* Move the handle init to a separate function.
* Move the temp file truncation to the output function.
* Remember whether we sync in a variable for readability.
* Handle EINTR and short writes in child_out().
* Always call sync_output() in case output_sync was changed due to error.
load.c (load_object, load_file): Accept an additional argument
DLP and return in it a pointer that can be used to unload the
dynamic object.
read.c (eval): Call load_file with an additional argument, and
record the pointer returned there in the 'struct file' object of
dynamic objects in that object's 'struct file'.
commands.c (execute_file_commands): Unload dynamic objects
before remaking them, to avoid failure to remake if the OS doesn't
allow overwriting objects that are in use.
filedef.h (struct file): New member dlopen_ptr.
gnumake.h (GMK_EXPORT): Define to dllexport/dllimport
decorations for Windows and to nothing on other platforms.
(gmk_eval, gmk_expand, gmk_add_function): Add GMK_EXPORT qualifier
to prototypes.
makeint.h (MAIN): Define before including gnumake.h, to give
correct dllexport decorations to exported functions.
(load_file): Adjust prototype.
loadapi.c: Don't include gnumake.h, since makeint.h already
includes it, and takes care of defining MAIN before doing so.
build_w32.bat (LinkGCC): Produce an import library for functions
exported by Make for loadable dynamic objects.
w32/compat/posixfcn.c (dlclose): New function.
w32/include/dlfcn.h (dlclose): Add prototype.
scripts/features/load: Fix signatures of testload_gmk_setup and
explicit_setup, to bring them in line with the documentation.
Enhance the child_error() function so that it will write error output to the
child's sync output buffer, if it exists. If it doesn't the output goes to
stdout/stderr.
A new flag to the -O/--output-sync, "job", selects a per-job (that is, per
line of a recipe) output synchronization. To support this move the close of
the temp file out of the sync_output() function and don't do it until we free
the child, since we may call sync_output() multiple times in a given recipe.
When we set up for a new temp file, if we're in per-job mode we truncate the
file and seek to the beginning to re-use it for every job.
Provide a simple API for loaded objects to interact with GNU make. I still
won't guarantee that this API won't change but it's much closer to something
that's supported and provides easy-to-use interfaces with a public header
file.
and store them in static variables; however one value (std_dirs)
was not being stored statically so the second time through it was
not set.
Fixes Savannah bug #32511
- Fix Savannah bug #17752
- Test suite:
* When tests fail keep a "run" file containing the command invoked.
* Support for the Valgrind "memcheck" and "massif" tools.
One of our translations disappeared from the translations site so remove it.
The fdl.texi file was changed to not contain any @node entries, so add some
around it in make.texi.
Add a new feature to the test suite suggested by Icarus Sparry:
set a timer before invoking a test, so that if it loops infinitely we
will wake up and have a chance to kill the process and continue.
string into the strcache. As a side-effect, many more structure members and
function arguments can/should be declared const.
As mentioned in the changelog, unfortunately measurement shows that this
change does not yet reduce memory. The problem is with secondary expansion:
because of this we store all the prerequisites in the string cache twice.
First we store the prerequisite string after initial expansion but before
secondary expansion, then we store each individual file after secondary
expansion and expand_deps(). I plan to change expand_deps() to be callable
in either context (eval or snap_deps) then have non-second-expansion
targets call expand_deps() during eval, so that we only need to store that
dependency list once.
Update NEWS docs.
Enhance the manual to use automake version.texi, and use the canonical
FSF copyright features and statement.
Some $(realpath ...) tests won't work on Windows; leave them out
The jobserver filedescriptor test might fail if some FDs are reserved,
so for now comment out that check.
Revert a fix for $? including non-existent files as it shows a bug
in the Linux kernel build. Give them a release to fix this.
Add some changes from Eli Z. for Windows changes.
I decided this feature was too impacting to make the permanent default
behavior. This set of changes makes the default behavior of make the
old behavior (no second expansion). If you want second expansion, you
must define the .SECONDEXPANSION: special target before the first target
that needs it.
This set of changes ONLY fixes explicit and static pattern rules to work
like this. Implicit rules still have second expansion enabled all the
time: I'll work on that next.
Note that there is still a backward-incompatibility: now to get the old
SysV behavior using $$@ etc. in the prerequisites list you need to set
.SECONDEXPANSION: as well.
