* makeint.h: Change MAP_SPACE to MAP_NEWLINE, and add MAP_PATHSEP
and MAP_SPACE which is now MAP_BLANK|MAP_NEWLINE. Create
NEW_TOKEN(), END_OF_TOKEN(), ISBLANK(), ISSPACE() macros.
* main.c (initialize_stopchar_map): Set MAP_NEWLINE only for
newline characters.
* Convert all uses of isblank() and isspace() to macros.
* Examine all uses of isblank() (doesn't accept newlines) and
change them wherever possible to ISSPACE() (does accept newlines).
* function.c (func_foreach): Strip leading/trailing space.
* variable.c (parse_variable_definition): Clean up.
* tests/scripts/functions/foreach: Test settings and errors.
* tests/scripts/functions/call: Rewrite to new-style.
* tests/scripts/misc/bs-nl: Add many more tests for newlines.
* NEWS: Add information about reading files.
* make.texi (File Function): Describe reading files.
* tests/scripts/functions/file: Test new features for $(file ...)
Testing has shown that vfork() is actually significantly
more efficient on systems where it's supported, even for
copy-on-write implementations. If make is big enough,
duplicating the page tables is significant overhead.
* configure.ac: Check for fork/vfork.
* makeint.h: Include vfork.h and set up #define for it.
* os.h, posixos.c (get_bad_stdin): For children who can't use
the normal stdin file descriptor, get a broken one.
* job.c (start_job_command): Avoid so many ifdefs and simplify
the invocation of child_execute_job()
(child_execute_job): move the fork operation here so it can
return early for the parent process. Switch to use vfork().
* function.c (func_shell_base): Use new child_execute_job() and
simplify ifdefs.
* job.h, main.c, remote-cstms.c, vmsjobs.c, w32os.c: Update
declarations and calls.
Add a new variable .SHELLSTATUS which holds the exit status of the
last-invoked shell function or != assignment.
* NEWS, doc/make.texi: Document the change.
* function.c (shell_completed, msdos_openpipe, func_shell_base): Add
shell_completed() to handle the completion of the shell, by setting
.SHELLSTATUS. Call it where needed.
* job.c (child_handler): Call shell_completed().
* tests/scripts/functions/shell: Add tests for .SHELLSTATUS.
This fix required a complete rewrite of the command parser vmsjobs.c
child_execute_job. The old parser had too many incorrect assumptions
about DCL commands and could not be repaired to extended.
The parser now more closely parses VMS commands and handles quoted
commands and redirection. Command File mode has been improved, but can
not fully support bs-nl syntax.
VMS Unix shell simulation has been improved.
* commands.c: vms_comma_separator is now a run-time setting.
* function.c: vms_comma_separator is now a run-time setting.
* function.c(func_basename_dir) now reports "[]" or "./" based on
VMS crtl runtime setting.
* job.c(start_job_command): VMS Handle empty commands propery.
* main.c: Add VMS environment variables for run-time settings.
* vms_legacy_behavior - Force older behavior.
* vms_comma_separator - Commas or spaces for separators.
* vms_unix_simulation - Enhanced Posix shell simulation features.
* Detect if VMS CRTL is set to report Unix paths instead of VMS.
* ':' and '>' are also MAP_DIRSEP on VMS.
* makeint.h: Add VMS run-time option variables.
* readme.vms: Update to current behavior.
* variable.c(define_variable_in_set): Fix VMS Environment variable
lookup.
* variable.c(define_automatic_variables): Remove some VMS specific
automatic variables and use the Unix ones instead.
* vms_export_symbol.c: Set max symbol size correctly.
* vmsjobs.c: child_execute_job() complete rewrite of VMS comand
parsing.
* vmsjobs.c(build_vms_cmd): VMS commmand building with shell simulation.
Signed-off-by: Paul Smith <psmith@gnu.org>
* job.c (start_job_command) [WINDOWS32]: Compute outfd and errfd
as on Posix platforms, and pass the results to process_easy.
* function.c (windows32_openpipe) [WINDOWS32]: Accept an
additional argument ERRFD and use it for redirecting the standard
error handle passed to the subprocess.
(func_shell_base) [WINDOWS32]: Pass the computed errfd to
windows32_openpipe.
* function.c: add VMS code to func_notdir_suffix and func_basename_dir
to work on comma separated lists; this fixes the expansion of
$(^D), $(+D) and the F variants for VMS.
* commands.c, function.c, hash.c, job.c, main.c, output.c:
use MAKE exit codes.
* makeint.h: encode make exit codes so that they are VMS compatible.
* job.c: check child exit code for VMS style exit codes.
* vmsjobs.c: save and return VMS style exit code.
Reported by Tim Murphy <tnmurphy@gmail.com>
* function.c (func_file): Only write TEXT if it is not NULL.
* NEWS, doc/make.texi: Document the new feature
* tests/scripts/functions/file: Verify that the no-text version of
$(file ...) works and doesn't add a newline.
* output.c (error, fatal, message): Take an extra argument specifying
how many bytes are used by the formatted arguments.
(get_buffer): New function that allocates the requested buffer size.
Remove msc_vsnprintf(), vfmtconcat(), and fmtconcat() as unneeded.
* makeint.h: Declare various helper macros for generating output.
* *.c: Change all error(), fatal(), message() calls to use the macros,
or pass the extra length argument directly.
Expand the characters which are legal in a function name, and check
the name for validity. Create a type for the function pointer.
Convert the last argument from a boolean to flags, to allow for expansion.
function.c (IS_ABSOLUTE) [__CYGWIN__]: Special definition for Cygwin.
(abspath) [__CYGWIN__]: Reset root_len to 1 if the absolute file name
has the Posix /foo/bar form.
[HAVE_DOS_PATHS]: Use root_len instead of hard-coded 2.
In this mode we still collect all the output from a given target and
dump it at once. However we don't treat recursive lines any differently
from non-recursive lines. Also we don't print enter/leave messages
after every dump. However we do ensure that we always print them once
to stdout, so the parent make will collect it properly.
Create a new file, output.c, and collect functions that generate output there.
We introduce a new global context specifying where output should go (to stdout
or to a sync file), and the lowest level output generator chooses where to
write output based on that context.
This allows us to set the context globally, and all operations that write
output (including functions like $(info ...) etc.) will use it.
Removed the "--trace=dir" capability. It was too confusing. If you have
directory tracking enabled then output sync will print the enter/leave message
for each synchronized block. If you don't want that, disable directory
tracking.
In various places we were passing flags and characters to compare, then
using complex conditionals to see where to stop in string searches.
Performance numbers reveal that we were spending as much as 23% of our
processing time in these functions, most of it in the comparison lines.
Instead create a character map and use a single bitwise comparison to
determine if this is any one of the stop characters.
w32/compat/posixfcn.c: New file, with emulations of Posix
functions and Posix functionality for MS-Windows.
w32/subproc/sub_proc.c: Include io.h.
(process_noinherit): New function, forces a file descriptor to not
be inherited by child processes.
(process_easy): Accept two additional arguments, and use them to
set up the standard output and standard error handles of the child
process.
w32/include/sub_proc.h (process_easy): Adjust prototype.
(process_noinherit): Add prototype.
read.c [WINDOWS32]: Include windows.h and sub_proc.h.
makeint.h (LOCALEDIR) [WINDOWS32}: Define to NULL if not
defined. This is needed because the MS-Windows build doesn't have
a canonical place for LOCALEDIR.
(WIN32_LEAN_AND_MEAN) [WINDOWS32]: Define, to avoid getting from
windows.h header too much stuff that could conflict with the code.
main.c <sync_mutex>: New static variable.
<switches>: Add support for "--sync-mutex" switch.
(decode_output_sync_flags): Decode the --sync-mutex= switch.
(prepare_mutex_handle_string) [WINDOWS32]: New function.
(main): Add "output-sync" to .FEATURES.
job.h (CLOSE_ON_EXEC) [WINDOWS32]: Define to call
process_noinherit.
(F_GETFD, F_SETLKW, F_WRLCK, F_UNLCK, struct flock) [WINDOWS32]:
New macros.
(RECORD_SYNC_MUTEX): New macro, a no-op for Posix platforms.
(sync_handle_t): New typedef.
job.c <sync_handle>: Change type to sync_handle_t.
(FD_NOT_EMPTY): Seek to the file's end. Suggested by Frank
Heckenbach <f.heckenbach@fh-soft.de>.
(pump_from_tmp_fd) [WINDOWS32]: Switch to_fd to binary mode for
the duration of this function, and then change back before
returning.
(start_job_command) [WINDOWS32]: Support output_sync mode on
MS-Windows. Use a system-wide mutex instead of locking
stdout/stderr. Call process_easy with two additional arguments:
child->outfd and child->errfd.
(exec_command) [WINDOWS32]: Pass two additional arguments, both
-1, to process_easy, to adjust for the changed function signature.
function.c (windows32_openpipe) [WINDOWS32]: This function now
returns an int, which is -1 if it fails and zero otherwise. It
also calls 'error' instead of 'fatal', to avoid exiting
prematurely.
(func_shell_base) [WINDOWS32]: Call perror_with_name if
windows32_openpipe fails, now that it always returns. This avoids
a compiler warning that error_prefix is not used in the MS-Windows
build.
config.h.W32.template (OUTPUT_SYNC): Define.
build_w32.bat: Add w32/compat/posixfcn.c to compilation and
linking commands.
From Frank Heckenbach <f.heckenbach@fh-soft.de>:
job.c (sync_output): Don't discard the output if
acquire_semaphore fails; instead, dump the output unsynchronized.
Provide a simple API for loaded objects to interact with GNU make. I still
won't guarantee that this API won't change but it's much closer to something
that's supported and provides easy-to-use interfaces with a public header
file.
This can happen when Make is invoked from a GUI application.
* w32/subproc/sub_proc.c (process_init_fd): Don't dereference
pproc if it is a NULL pointer.
(process_begin, process_cleanup): Don't try to close pipe handles
whose value is INVALID_HANDLE_VALUE.
(process_easy): Initialize hIn, hOut, and hErr to
INVALID_HANDLE_VALUE. If DuplicateHandle fails with
ERROR_INVALID_HANDLE, duplicate a handle for the null device
instead of STD_INPUT_HANDLE, STD_OUTPUT_HANDLE or
STD_ERROR_HANDLE. Don't try to close pipe handles whose value is
INVALID_HANDLE_VALUE.
* function.c (windows32_openpipe): Initialize hIn and hErr to
INVALID_HANDLE_VALUE. If DuplicateHandle fails with
ERROR_INVALID_HANDLE, duplicate a handle for the null device
instead of STD_INPUT_HANDLE or STD_ERROR_HANDLE. Fix indentation.
Don't try to close handles whose value is INVALID_HANDLE_VALUE.
This allows us to create new functions without changing function.c.
You still have to modify the GNU make code (for now) though: this is
simply a preliminary step to possibly allowing make to load modules.
Modify the Guile integration to use this method rather than ifdefs
in function.c.
On configure-enabled systems, configure will detect Guile installed
(using pkg-config, which is how GNU Guile is distributed) and enable
it if so.
On all non-configure-enabled systems, currently, the default is for
Guile support to be disabled.
