mirror of https://github.com/lightbend/config.git synced 2024-12-27 13:20:27 +08:00

I initially misread the note to mean Akka/Play 2.x.

Seeing as Akka 2.0 and Play 2.0 is close to 7 years ago, we can lose the note now?

* https://github.com/akka/akka/releases/tag/v2.0
* https://github.com/playframework/playframework/releases/tag/2.0

2019-01-28 15:44:58 +00:00

61 KiB

Raw Blame History

Table of Contents generated with DocToc

HOCON (Human-Optimized Config Object Notation)

HOCON (Human-Optimized Config Object Notation)

This is an informal spec, but hopefully it's clear.

Goals / Background

The primary goal is: keep the semantics (tree structure; set of types; encoding/escaping) from JSON, but make it more convenient as a human-editable config file format.

The following features are desirable, to support human usage:

less noisy / less pedantic syntax
ability to refer to another part of the configuration (set a value to another value)
import/include another configuration file into the current file
a mapping to a flat properties list such as Java's system properties
ability to get values from environment variables
ability to write comments

Implementation-wise, the format should have these properties:

a JSON superset, that is, all valid JSON should be valid and should result in the same in-memory data that a JSON parser would have produced.
be deterministic; the format is flexible, but it is not heuristic. It should be clear what's invalid and invalid files should generate errors.
require minimal look-ahead; should be able to tokenize the file by looking at only the next three characters. (right now, the only reason to look at three is to find "//" comments; otherwise you can parse looking at two.)

HOCON is significantly harder to specify and to parse than JSON. Think of it as moving the work from the person maintaining the config file to the computer program.

Definitions

a key is a string JSON would have to the left of : and a value is anything JSON would have to the right of :. i.e. the two halves of an object field.
a value is any "value" as defined in the JSON spec, plus unquoted strings and substitutions as defined in this spec.
a simple value is any value excluding an object or array value.
a field is a key, any separator such as ':', and a value.
references to a file ("the file being parsed") can be understood to mean any byte stream being parsed, not just literal files in a filesystem.

Syntax

Much of this is defined with reference to JSON; you can find the JSON spec at https://json.org/ of course.

Unchanged from JSON

files must be valid UTF-8
quoted strings are in the same format as JSON strings
values have possible types: string, number, object, array, boolean, null
allowed number formats matches JSON; as in JSON, some possible floating-point values are not represented, such as NaN

Comments

Anything between // or # and the next newline is considered a comment and ignored, unless the // or # is inside a quoted string.

Omit root braces

JSON documents must have an array or object at the root. Empty files are invalid documents, as are files containing only a non-array non-object value such as a string.

In HOCON, if the file does not begin with a square bracket or curly brace, it is parsed as if it were enclosed with {} curly braces.

A HOCON file is invalid if it omits the opening { but still has a closing }; the curly braces must be balanced.

Key-value separator

The = character can be used anywhere JSON allows :, i.e. to separate keys from values.

If a key is followed by {, the : or = may be omitted. So "foo" {} means "foo" : {}

Commas

Values in arrays, and fields in objects, need not have a comma between them as long as they have at least one ASCII newline (\n, decimal value 10) between them.

The last element in an array or last field in an object may be followed by a single comma. This extra comma is ignored.

[1,2,3,] and [1,2,3] are the same array.
[1\n2\n3] and [1,2,3] are the same array.
[1,2,3,,] is invalid because it has two trailing commas.
[,1,2,3] is invalid because it has an initial comma.
[1,,2,3] is invalid because it has two commas in a row.
these same comma rules apply to fields in objects.

Whitespace

The JSON spec simply says "whitespace"; in HOCON whitespace is defined as follows:

any Unicode space separator (Zs category), line separator (Zl category), or paragraph separator (Zp category), including nonbreaking spaces (such as 0x00A0, 0x2007, and 0x202F). The BOM (0xFEFF) must also be treated as whitespace.
tab (\t 0x0009), newline ('\n' 0x000A), vertical tab ('\v' 0x000B), form feed (\f' 0x000C), carriage return ('\r' 0x000D), file separator (0x001C), group separator (0x001D), record separator (0x001E), unit separator (0x001F).

In Java, the isWhitespace() method covers these characters with the exception of nonbreaking spaces and the BOM.

While all Unicode separators should be treated as whitespace, in this spec "newline" refers only and specifically to ASCII newline 0x000A.

Duplicate keys and object merging

The JSON spec does not clarify how duplicate keys in the same object should be handled. In HOCON, duplicate keys that appear later override those that appear earlier, unless both values are objects. If both values are objects, then the objects are merged.

Note: this would make HOCON a non-superset of JSON if you assume that JSON requires duplicate keys to have a behavior. The assumption here is that duplicate keys are invalid JSON.

To merge objects:

add fields present in only one of the two objects to the merged object.
for non-object-valued fields present in both objects, the field found in the second object must be used.
for object-valued fields present in both objects, the object values should be recursively merged according to these same rules.

Object merge can be prevented by setting the key to another value first. This is because merging is always done two values at a time; if you set a key to an object, a non-object, then an object, first the non-object falls back to the object (non-object always wins), and then the object falls back to the non-object (no merging, object is the new value). So the two objects never see each other.

These two are equivalent:

{
    "foo" : { "a" : 42 },
    "foo" : { "b" : 43 }
}

{
    "foo" : { "a" : 42, "b" : 43 }
}

And these two are equivalent:

{
    "foo" : { "a" : 42 },
    "foo" : null,
    "foo" : { "b" : 43 }
}

{
    "foo" : { "b" : 43 }
}

The intermediate setting of "foo" to null prevents the object merge.

Unquoted strings

A sequence of characters outside of a quoted string is a string value if:

it does not contain "forbidden characters": '$', '"', '{', '}', '[', ']', ':', '=', ',', '+', '#', '`', '^', '?', '!', '@', '*', '&', '' (backslash), or whitespace.
it does not contain the two-character string "//" (which starts a comment)
its initial characters do not parse as true, false, null, or a number.

Unquoted strings are used literally, they do not support any kind of escaping. Quoted strings may always be used as an alternative when you need to write a character that is not permitted in an unquoted string.

truefoo parses as the boolean token true followed by the unquoted string foo. However, footrue parses as the unquoted string footrue. Similarly, 10.0bar is the number 10.0 then the unquoted string bar but bar10.0 is the unquoted string bar10.0. (In practice, this distinction doesn't matter much because of value concatenation; see later section.)

In general, once an unquoted string begins, it continues until a forbidden character or the two-character string "//" is encountered. Embedded (non-initial) booleans, nulls, and numbers are not recognized as such, they are part of the string.

An unquoted string may not begin with the digits 0-9 or with a hyphen (-, 0x002D) because those are valid characters to begin a JSON number. The initial number character, plus any valid-in-JSON number characters that follow it, must be parsed as a number value. Again, these characters are not special inside an unquoted string; they only trigger number parsing if they appear initially.

Note that quoted JSON strings may not contain control characters (control characters include some whitespace characters, such as newline). This rule is from the JSON spec. However, unquoted strings have no restriction on control characters, other than the ones listed as "forbidden characters" above.

Some of the "forbidden characters" are forbidden because they already have meaning in JSON or HOCON, others are essentially reserved keywords to allow future extensions to this spec.

Multi-line strings

Multi-line strings are similar to Python or Scala, using triple quotes. If the three-character sequence """ appears, then all Unicode characters until a closing """ sequence are used unmodified to create a string value. Newlines and whitespace receive no special treatment. Unlike Scala, and unlike JSON quoted strings, Unicode escapes are not interpreted in triple-quoted strings.

In Python, """foo"""" is a syntax error (a triple-quoted string followed by a dangling unbalanced quote). In Scala, it is a four-character string foo". HOCON works like Scala; any sequence of at least three quotes ends the multi-line string, and any "extra" quotes are part of the string.

Value concatenation

The value of an object field or array element may consist of multiple values which are combined. There are three kinds of value concatenation:

if all the values are simple values (neither objects nor arrays), they are concatenated into a string.
if all the values are arrays, they are concatenated into one array.
if all the values are objects, they are merged (as with duplicate keys) into one object.

String value concatenation is allowed in field keys, in addition to field values and array elements. Objects and arrays do not make sense as field keys.

String value concatenation

String value concatenation is the trick that makes unquoted strings work; it also supports substitutions (${foo} syntax) in strings.

Only simple values participate in string value concatenation. Recall that a simple value is any value other than arrays and objects.

As long as simple values are separated only by non-newline whitespace, the whitespace between them is preserved and the values, along with the whitespace, are concatenated into a string.

String value concatenations never span a newline, or a character that is not part of a simple value.

A string value concatenation may appear in any place that a string may appear, including object keys, object values, and array elements.

Whenever a value would appear in JSON, a HOCON parser instead collects multiple values (including the whitespace between them) and concatenates those values into a string.

Whitespace before the first and after the last simple value must be discarded. Only whitespace between simple values must be preserved.

So for example foo bar baz parses as three unquoted strings, and the three are value-concatenated into one string. The inner whitespace is kept and the leading and trailing whitespace is trimmed. The equivalent string, written in quoted form, would be "foo bar baz".

Value concatenating foo bar (two unquoted strings with whitespace) and quoted string "foo bar" would result in the same in-memory representation, seven characters.

For purposes of string value concatenation, non-string values are converted to strings as follows (strings shown as quoted strings):

true and false become the strings "true" and "false".
null becomes the string "null".
quoted and unquoted strings are themselves.
numbers should be kept as they were originally written in the file. For example, if you parse 1e5 then you might render it alternatively as 1E5 with capital E, or just 100000. For purposes of value concatenation, it should be rendered as it was written in the file.
a substitution is replaced with its value which is then converted to a string as above.
it is invalid for arrays or objects to appear in a string value concatenation.

A single value is never converted to a string. That is, it would be wrong to value concatenate true by itself; that should be parsed as a boolean-typed value. Only true foo (true with another simple value on the same line) should be parsed as a value concatenation and converted to a string.

Array and object concatenation

Arrays can be concatenated with arrays, and objects with objects, but it is an error if they are mixed.

For purposes of concatenation, "array" also means "substitution that resolves to an array" and "object" also means "substitution that resolves to an object."

Within an field value or array element, if only non-newline whitespace separates the end of a first array or object or substitution from the start of a second array or object or substitution, the two values are concatenated. Newlines may occur within the array or object, but not between them. Newlines between prevent concatenation.

For objects, "concatenation" means "merging", so the second object overrides the first.

Arrays and objects cannot be field keys, whether concatenation is involved or not.

Here are several ways to define a to the same object value:

// one object
a : { b : 1, c : 2 }
// two objects that are merged via concatenation rules
a : { b : 1 } { c : 2 }
// two fields that are merged
a : { b : 1 }
a : { c : 2 }

Here are several ways to define a to the same array value:

// one array
a : [ 1, 2, 3, 4 ]
// two arrays that are concatenated
a : [ 1, 2 ] [ 3, 4 ]
// a later definition referring to an earlier
// (see "self-referential substitutions" below)
a : [ 1, 2 ]
a : ${a} [ 3, 4 ]

A common use of object concatenation is "inheritance":

data-center-generic = { cluster-size = 6 }
data-center-east = ${data-center-generic} { name = "east" }

A common use of array concatenation is to add to paths:

path = [ /bin ]
path = ${path} [ /usr/bin ]

Note: Concatenation with whitespace and substitutions

When concatenating substitutions such as ${foo} ${bar}, the substitutions may turn out to be strings (which makes the whitespace between them significant) or may turn out to be objects or lists (which makes it irrelevant). Unquoted whitespace must be ignored in between substitutions which resolve to objects or lists. Quoted whitespace should be an error.

Note: Arrays without commas or newlines

Arrays allow you to use newlines instead of commas, but not whitespace instead of commas. Non-newline whitespace will produce concatenation rather than separate elements.

// this is an array with one element, the string "1 2 3 4"
[ 1 2 3 4 ]
// this is an array of four integers
[ 1
  2
  3
  4 ]

// an array of one element, the array [ 1, 2, 3, 4 ]
[ [ 1, 2 ] [ 3, 4 ] ]
// an array of two arrays
[ [ 1, 2 ]
  [ 3, 4 ] ]

If this gets confusing, just use commas. The concatenation behavior is useful rather than surprising in cases like:

[ This is an unquoted string my name is ${name}, Hello ${world} ]
[ ${a} ${b}, ${x} ${y} ]

Non-newline whitespace is never an element or field separator.

Path expressions

Path expressions are used to write out a path through the object graph. They appear in two places; in substitutions, like ${foo.bar}, and as the keys in objects like { foo.bar : 42 }.

Path expressions are syntactically identical to a value concatenation, except that they may not contain substitutions. This means that you can't nest substitutions inside other substitutions, and you can't have substitutions in keys.

When concatenating the path expression, any . characters outside quoted strings are understood as path separators, while inside quoted strings . has no special meaning. So foo.bar."hello.world" would be a path with three elements, looking up key foo, key bar, then key hello.world.

The main tricky point is that . characters in numbers do count as a path separator. When dealing with a number as part of a path expression, it's essential to retain the original string representation of the number as it appeared in the file (rather than converting it back to a string with a generic number-to-string library function).

10.0foo is a number then unquoted string foo and should be the two-element path with 10 and 0foo as the elements.
foo10.0 is an unquoted string with a . in it, so this would be a two-element path with foo10 and 0 as the elements.
foo"10.0" is an unquoted then a quoted string which are concatenated, so this is a single-element path.
1.2.3 is the three-element path with 1,2,3

Unlike value concatenations, path expressions are always converted to a string, even if they are just a single value.

If you have an array or element value consisting of the single value true, it's a value concatenation and retains its character as a boolean value.

If you have a path expression (in a key or substitution) then it must always be converted to a string, so true becomes the string that would be quoted as "true".

If a path element is an empty string, it must always be quoted. That is, a."".b is a valid path with three elements, and the middle element is an empty string. But a..b is invalid and should generate an error. Following the same rule, a path that starts or ends with a . is invalid and should generate an error.

Paths as keys

If a key is a path expression with multiple elements, it is expanded to create an object for each path element other than the last. The last path element, combined with the value, becomes a field in the most-nested object.

In other words:

foo.bar : 42

is equivalent to:

foo { bar : 42 }

and:

foo.bar.baz : 42

is equivalent to:

foo { bar { baz : 42 } }

and so on. These values are merged in the usual way; which implies that:

a.x : 42, a.y : 43

is equivalent to:

a { x : 42, y : 43 }

Because path expressions work like value concatenations, you can have whitespace in keys:

a b c : 42

is equivalent to:

"a b c" : 42

Because path expressions are always converted to strings, even single values that would normally have another type become strings.

true : 42 is "true" : 42
3 : 42 is "3" : 42
3.14 : 42 is "3" : { "14" : 42 }

As a special rule, the unquoted string include may not begin a path expression in a key, because it has a special interpretation (see below).

Substitutions

Substitutions are a way of referring to other parts of the configuration tree.

The syntax is ${pathexpression} or ${?pathexpression} where the pathexpression is a path expression as described above. This path expression has the same syntax that you could use for an object key.

The ? in ${?pathexpression} must not have whitespace before it; the three characters ${? must be exactly like that, grouped together.

For substitutions which are not found in the configuration tree, implementations may try to resolve them by looking at system environment variables or other external sources of configuration. (More detail on environment variables in a later section.)

Substitutions are not parsed inside quoted strings. To get a string containing a substitution, you must use value concatenation with the substitution in the unquoted portion:

key : ${animal.favorite} is my favorite animal

Or you could quote the non-substitution portion:

key : ${animal.favorite}" is my favorite animal"

Substitutions are resolved by looking up the path in the configuration. The path begins with the root configuration object, i.e. it is "absolute" rather than "relative."

Substitution processing is performed as the last parsing step, so a substitution can look forward in the configuration. If a configuration consists of multiple files, it may even end up retrieving a value from another file.

If a key has been specified more than once, the substitution will always evaluate to its latest-assigned value (that is, it will evaluate to the merged object, or the last non-object value that was set, in the entire document being parsed including all included files).

If a configuration sets a value to null then it should not be looked up in the external source. Unfortunately there is no way to "undo" this in a later configuration file; if you have { "HOME" : null } in a root object, then ${HOME} will never look at the environment variable. There is no equivalent to JavaScript's delete operation in other words.

If a substitution does not match any value present in the configuration and is not resolved by an external source, then it is undefined. An undefined substitution with the ${foo} syntax is invalid and should generate an error.

If a substitution with the ${?foo} syntax is undefined:

if it is the value of an object field then the field should not be created. If the field would have overridden a previously-set value for the same field, then the previous value remains.
if it is an array element then the element should not be added.
if it is part of a value concatenation with another string then it should become an empty string; if part of a value concatenation with an object or array it should become an empty object or array.
foo : ${?bar} would avoid creating field foo if bar is undefined. foo : ${?bar}${?baz} would also avoid creating the field if both bar and baz are undefined.

Substitutions are only allowed in field values and array elements (value concatenations), they are not allowed in keys or nested inside other substitutions (path expressions).

A substitution is replaced with any value type (number, object, string, array, true, false, null). If the substitution is the only part of a value, then the type is preserved. Otherwise, it is value-concatenated to form a string.

Self-Referential Substitutions

The big picture:

substitutions normally "look forward" and use the final value for their path expression
when this would create a cycle, when possible the cycle must be broken by looking backward only (thus removing one of the substitutions that's a link in the cycle)

The idea is to allow a new value for a field to be based on the older value:

path : "a:b:c"
path : ${path}":d"

A self-referential field is one which:

has a substitution, or value concatenation containing a substitution, as its value
where this field value refers to the field being defined, either directly or by referring to one or more other substitutions which eventually point back to the field being defined

Examples of self-referential fields:

a : ${a}
a : ${a}bc
path : ${path} [ /usr/bin ]

Note that an object or array with a substitution inside it is not considered self-referential for this purpose. The self-referential rules do not apply to:

a : { b : ${a} }
a : [${a}]

These cases are unbreakable cycles that generate an error. (If "looking backward" were allowed for these, something like a={ x : 42, y : ${a.x} } would look backward for a nonexistent a while resolving ${a.x}.)

A possible implementation is:

substitutions are resolved by looking up paths in a document. Cycles only arise when the lookup document is an ancestor node of the substitution node.
while resolving a potentially self-referential field (any substitution or value concatenation that contains a substitution), remove that field and all fields which override it from the lookup document.

The simplest form of this implementation will report a circular reference as missing; in a : ${a} you would remove a : ${a} while resolving ${a}, leaving an empty document to look up ${a} in. You can give a more helpful error message if, rather than simply removing the field, you leave a marker value describing the cycle. Then generate an error if you return to that marker value during resolution.

Cycles should be treated the same as a missing value when resolving an optional substitution (i.e. the ${?foo} syntax). If ${?foo} refers to itself then it's as if it referred to a nonexistent value.

The `+=` field separator

Fields may have += as a separator rather than : or =. A field with += transforms into a self-referential array concatenation, like this:

a += b

becomes:

a = ${?a} [b]

+= appends an element to a previous array. If the previous value was not an array, an error will result just as it would in the long form a = ${?a} [b]. Note that the previous value is optional (${?a} not ${a}), which allows a += b to be the first mention of a in the file (it is not necessary to have a = [] first).

Examples of Self-Referential Substitutions

In isolation (with no merges involved), a self-referential field is an error because the substitution cannot be resolved:

foo : ${foo} // an error

When foo : ${foo} is merged with an earlier value for foo, however, the substitution can be resolved to that earlier value. When merging two objects, the self-reference in the overriding field refers to the overridden field. Say you have:

foo : { a : 1 }

and then:

foo : ${foo}

Then ${foo} resolves to { a : 1 }, the value of the overridden field.

It would be an error if these two fields were reversed, so first:

foo : ${foo}

and then second:

foo : { a : 1 }

Here the ${foo} self-reference comes before foo has a value, so it is undefined, exactly as if the substitution referenced a path not found in the document.

Because foo : ${foo} conceptually looks to previous definitions of foo for a value, the error should be treated as "undefined" rather than "intractable cycle"; as a result, the optional substitution syntax ${?foo} does not create a cycle:

foo : ${?foo} // this field just disappears silently

If a substitution is hidden by a value that could not be merged with it (by a non-object value) then it is never evaluated and no error will be reported. So for example:

foo : ${does-not-exist}
foo : 42

In this case, no matter what ${does-not-exist} resolves to, we know foo is 42, so ${does-not-exist} is never evaluated and there is no error. The same is true for cycles like foo : ${foo}, foo : 42, where the initial self-reference must simply be ignored.

A self-reference resolves to the value "below" even if it's part of a path expression. So for example:

foo : { a : { c : 1 } }
foo : ${foo.a}
foo : { a : 2 }

Here, ${foo.a} would refer to { c : 1 } rather than 2 and so the final merge would be { a : 2, c : 1 }.

Recall that for a field to be self-referential, it must have a substitution or value concatenation as its value. If a field has an object or array value, for example, then it is not self-referential even if there is a reference to the field itself inside that object or array.

Implementations must be careful to allow objects to refer to paths within themselves, for example:

bar : { foo : 42,
        baz : ${bar.foo}
      }

Here, if an implementation resolved all substitutions in bar as part of resolving the substitution ${bar.foo}, there would be a cycle. The implementation must only resolve the foo field in bar, rather than recursing the entire bar object.

Because there is no inherent cycle here, the substitution must "look forward" (including looking at the field currently being defined). To make this clearer, bar.baz would be 43 in:

bar : { foo : 42,
        baz : ${bar.foo}
      }
bar : { foo : 43 }

Mutually-referring objects should also work, and are not self-referential (so they look forward):

// bar.a should end up as 4
bar : { a : ${foo.d}, b : 1 }
bar.b = 3
// foo.c should end up as 3
foo : { c : ${bar.b}, d : 2 }
foo.d = 4

Another tricky case is an optional self-reference in a value concatenation, in this example a should be foo not foofoo because the self reference has to "look back" to an undefined a:

a = ${?a}foo

In general, in resolving a substitution the implementation must:

lazy-evaluate the substitution target so there's no "circularity by side effect"
"look forward" and use the final value for the path specified in the substitution
if a cycle results, the implementation must "look back" in the merge stack to try to resolve the cycle
if neither lazy evaluation nor "looking only backward" resolves a cycle, the substitution is missing which is an error unless the ${?foo} optional-substitution syntax was used.

For example, this is not possible to resolve:

bar : ${foo}
foo : ${bar}

A multi-step loop like this should also be detected as invalid:

a : ${b}
b : ${c}
c : ${a}

Some cases have undefined behavior because the behavior depends on the order in which two fields are resolved, and that order is not defined. For example:

a : 1
b : 2
a : ${b}
b : ${a}

Implementations are allowed to handle this by setting both a and b to 1, setting both to 2, or generating an error. Ideally this situation would generate an error, but that may be difficult to implement. Making the behavior defined would require always working with ordered maps rather than unordered maps, which is too constraining. Implementations only have to track order for duplicate instances of the same field (i.e. merges).

Implementations must set both a and b to the same value in this case, however. In practice this means that all substitutions must be memoized (resolved once, with the result retained). Memoization should be keyed by the substitution "instance" (the specific occurrence of the ${} expression) rather than by the path inside the ${} expression, because substitutions may be resolved differently depending on their position in the file.

Includes

Include syntax

An include statement consists of the unquoted string include followed by whitespace and then either:

a single quoted string which is interpreted heuristically as URL, filename, or classpath resource.
url(), file(), or classpath() surrounding a quoted string which is then interpreted as a URL, file, or classpath. The string must be quoted, unlike in CSS.
required() surrounding one of the above

An include statement can appear in place of an object field.

If the unquoted string include appears at the start of a path expression where an object key would be expected, then it is not interpreted as a path expression or a key.

Instead, the next value must be a quoted string or a quoted string surrounded by url(), file(), or classpath(). This value is the resource name.

Together, the unquoted include and the resource name substitute for an object field syntactically, and are separated from the following object fields or includes by the usual comma (and as usual the comma may be omitted if there's a newline).

If an unquoted include at the start of a key is followed by anything other than a single quoted string or the url("")/file("")/classpath("") syntax, it is invalid and an error should be generated.

There can be any amount of whitespace, including newlines, between the unquoted include and the resource name. For url() etc., whitespace is allowed inside the parentheses () (outside of the quotes).

Value concatenation is NOT performed on the "argument" to include or url() etc. The argument must be a single quoted string. No substitutions are allowed, and the argument may not be an unquoted string or any other kind of value.

Unquoted include has no special meaning if it is not the start of a key's path expression.

It may appear later in the key:

# this is valid
{ foo include : 42 }
# equivalent to
{ "foo include" : 42 }

It may appear as an object or array value:

{ foo : include } # value is the string "include"
[ include ]       # array of one string "include"

You can quote "include" if you want a key that starts with the word "include", only unquoted include is special:

{ "include" : 42 }

Include semantics: merging

An including file contains the include statement and an included file is the one specified in the include statement. (They need not be regular files on a filesystem, but assume they are for the moment.)

An included file must contain an object, not an array. This is significant because both JSON and HOCON allow arrays as root values in a document.

If an included file contains an array as the root value, it is invalid and an error should be generated.

The included file should be parsed, producing a root object. The keys from the root object are conceptually substituted for the include statement in the including file.

If a key in the included object occurred prior to the include statement in the including object, the included key's value overrides or merges with the earlier value, exactly as with duplicate keys found in a single file.
If the including file repeats a key from an earlier-included object, the including file's value would override or merge with the one from the included file.

Include semantics: substitution

Substitutions in included files are looked up at two different paths; first, relative to the root of the included file; second, relative to the root of the including configuration.

Recall that substitution happens as a final step, after parsing. It should be done for the entire app's configuration, not for single files in isolation.

Therefore, if an included file contains substitutions, they must be "fixed up" to be relative to the app's configuration root.

Say for example that the root configuration is this:

{ a : { include "foo.conf" } }

And "foo.conf" might look like this:

{ x : 10, y : ${x} }

If you parsed "foo.conf" in isolation, then ${x} would evaluate to 10, the value at the path x. If you include "foo.conf" in an object at key a, however, then it must be fixed up to be ${a.x} rather than ${x}.

Say that the root configuration redefines a.x, like this:

{
    a : { include "foo.conf" }
    a : { x : 42 }
}

Then the ${x} in "foo.conf", which has been fixed up to ${a.x}, would evaluate to 42 rather than to 10. Substitution happens after parsing the whole configuration.

However, there are plenty of cases where the included file might intend to refer to the application's root config. For example, to get a value from a system property or from the reference configuration. So it's not enough to only look up the "fixed up" path, it's necessary to look up the original path as well.

Include semantics: missing files and required files

By default, if an included file does not exist then the include statement should be silently ignored (as if the included file contained only an empty object).

If however an included resource is mandatory then the name of the included resource may be wrapped with required(), in which case file parsing will fail with an error if the resource cannot be resolved.

The syntax for this is

include required("foo.conf")
include required(file("foo.conf"))
include required(classpath("foo.conf"))
include required(url("http://localhost/foo.conf"))

Other IO errors probably should not be ignored but implementations will have to make a judgment which IO errors reflect an ignorable missing file, and which reflect a problem to bring to the user's attention.

Include semantics: file formats and extensions

Implementations may support including files in other formats. Those formats must be compatible with the JSON type system, or have some documented mapping to JSON's type system.

If an implementation supports multiple formats, then the extension may be omitted from the name of included files:

include "foo"

If a filename has no extension, the implementation should treat it as a basename and try loading the file with all known extensions.

If the file exists with multiple extensions, they should all be loaded and merged together.

Files in HOCON format should be parsed last. Files in JSON format should be parsed next-to-last.

In short, include "foo" might be equivalent to:

include "foo.properties"
include "foo.json"
include "foo.conf"

This same extension-based behavior is applied to classpath resources and files.

For URLs, a basename without extension is not allowed; only the exact URL specified is used. The format will be chosen based on the Content-Type if available, or by the extension of the path component of the URL if no Content-Type is set. This is true even for file: URLs.

Include semantics: locating resources

A quoted string not surrounded by url(), file(), classpath() must be interpreted heuristically. The heuristic is to treat the quoted string as:

a URL, if the quoted string is a valid URL with a known protocol.
otherwise, a file or other resource "adjacent to" the one being parsed and of the same type as the one being parsed. The meaning of "adjacent to", and the string itself, has to be specified separately for each kind of resource.
On the Java Virtual Machine, if an include statement does not identify a valid URL or an existing resource "adjacent to" the including resource, implementations may wish to fall back to a classpath resource. This allows configurations found in files or URLs to access classpath resources in a natural way.

Implementations may vary in the kinds of resources they can include.

For resources located on the Java classpath:

included resources are looked up by calling getResource() on the same class loader used to look up the including resource.
if the included resource name is absolute (starts with '/') then it should be passed to getResource() with the '/' removed.
if the included resource name does not start with '/' then it should have the "directory" of the including resource prepended to it, before passing it to getResource(). If the including resource is not absolute (no '/') and has no "parent directory" (is just a single path element), then the included relative resource name should be left as-is.
it would be wrong to use getResource() to get a URL and then locate the included name relative to that URL, because a class loader is not required to have a one-to-one mapping between paths in its URLs and the paths it handles in getResource(). In other words, the "adjacent to" computation should be done on the resource name not on the resource's URL.

For plain files on the filesystem:

if the included file is an absolute path then it should be kept absolute and loaded as such.
if the included file is a relative path, then it should be located relative to the directory containing the including file. The current working directory of the process parsing a file must NOT be used when interpreting included paths.
if the file is not found, fall back to the classpath resource. The classpath resource should not have any package name added in front, it should be relative to the "root"; which means any leading "/" should just be removed (absolute is the same as relative since it's root-relative). The "/" is handled for consistency with including resources from inside other classpath resources, where the resource name may not be root-relative and "/" allows specifying relative to root.

URLs:

for files loaded from a URL, "adjacent to" should be based on parsing the URL's path component, replacing the last path element with the included name.
file: URLs should behave in exactly the same way as a plain filename

Implementations need not support files, Java resources, or URLs; and they need not support particular URL protocols. However, if they do support them they should do so as described above.

Note that at present, if url()/file()/classpath() are specified, the included items are NOT interpreted relative to the including items. Relative-to-including-file paths only work with the heuristic include "foo.conf". This may change in the future.

Conversion of numerically-indexed objects to arrays

In some file formats and contexts, such as Java properties files, there isn't a good way to define arrays. To provide some mechanism for this, implementations should support converting objects with numeric keys into arrays. For example, this object:

{ "0" : "a", "1" : "b" }

could be treated as:

[ "a", "b" ]

This allows creating an array in a properties file like this:

foo.0 = "a"
foo.1 = "b"

The details:

the conversion should be done lazily when required to avoid a type error, NOT eagerly anytime an object has numeric keys.
the conversion should be done when you would do an automatic type conversion (see the section "Automatic type conversions" below).
the conversion should be done in a concatenation when a list is expected and an object with numeric keys is found.
the conversion should not occur if the object is empty or has no keys which parse as positive integers.
the conversion should ignore any keys which do not parse as positive integers.
the conversion should sort by the integer value of each key and then build the array; if the integer keys are "0" and "2" then the resulting array would have indices "0" and "1", i.e. missing indices in the object are eliminated.

MIME Type

Use "application/hocon" for Content-Type.

API Recommendations

Implementations of HOCON ideally follow certain conventions and work in a predictable way.

Automatic type conversions

If an application asks for a value with a particular type, the implementation should attempt to convert types as follows:

number to string: convert the number into a string representation that would be a valid number in JSON.
boolean to string: should become the string "true" or "false"
string to number: parse the number with the JSON rules
string to boolean: the strings "true", "yes", "on", "false", "no", "off" should be converted to boolean values. It's tempting to support a long list of other ways to write a boolean, but for interoperability and keeping it simple, it's recommended to stick to these six.
string to null: the string "null" should be converted to a null value if the application specifically asks for a null value, though there's probably no reason an app would do this.
numerically-indexed object to array: see the section "Conversion of numerically-indexed objects to arrays" above

The following type conversions should NOT be performed:

null to anything: If the application asks for a specific type and finds null instead, that should usually result in an error.
object to anything
array to anything
anything to object
anything to array, with the exception of numerically-indexed object to array

Converting objects and arrays to and from strings is tempting, but in practical situations raises thorny issues of quoting and double-escaping.

Units format

Implementations may wish to support interpreting a value with some family of units, such as time units or memory size units: 10ms or 512K. HOCON does not have an extensible type system and there is no way to add a "duration" type. However, for example, if an application asks for milliseconds, the implementation can try to interpret a value as a milliseconds value.

If an API supports this, for each family of units it should define a default unit in the family. For example, the family of duration units might default to milliseconds (see below for details on durations). The implementation should then interpret values as follows:

if the value is a number, it is taken to be a number in the default unit.
if the value is a string, it is taken to be this sequence:
- optional whitespace
- a number
- optional whitespace
- an optional unit name consisting only of letters (letters are the Unicode L* categories, Java isLetter())
- optional whitespace
If a string value has no unit name, then it should be interpreted with the default unit, as if it were a number. If a string value has a unit name, that name of course specifies the value's interpretation.

Duration format

Implementations may wish to support a getMilliseconds() (and similar for other time units).

This can use the general "units format" described above; bare numbers are taken to be in milliseconds already, while strings are parsed as a number plus an optional unit string.

The supported unit strings for duration are case sensitive and must be lowercase. Exactly these strings are supported:

ns, nano, nanos, nanosecond, nanoseconds
us, micro, micros, microsecond, microseconds
ms, milli, millis, millisecond, milliseconds
s, second, seconds
m, minute, minutes
h, hour, hours
d, day, days

Period Format

Similar to the getDuration() method, there is a getPeriod() method available for getting time units as a java.time.Period.

This can use the general "units format" described above; bare numbers are taken to be in days, while strings are parsed as a number plus an optional unit string.

The supported unit strings for period are case sensitive and must be lowercase. Exactly these strings are supported:

d, day, days
w, week, weeks
m, mo, month, months (note that if you are using getTemporal() which may return either a java.time.Duration or a java.time.Period you will want to use mo rather than m to prevent your unit being parsed as minutes)
y, year, years

Size in bytes format

Implementations may wish to support a getBytes() returning a size in bytes.

This can use the general "units format" described above; bare numbers are taken to be in bytes already, while strings are parsed as a number plus an optional unit string.

The one-letter unit strings may be uppercase (note: duration units are always lowercase, so this convention is specific to size units).

There is an unfortunate nightmare with size-in-bytes units, that they may be in powers or two or powers of ten. The approach defined by standards bodies appears to differ from common usage, such that following the standard leads to people being confused. Worse, common usage varies based on whether people are talking about RAM or disk sizes, and various existing operating systems and apps do all kinds of different things. See https://en.wikipedia.org/wiki/Binary_prefix#Deviation_between_powers_of_1024_and_powers_of_1000 for examples. It appears impossible to sort this out without causing confusion for someone sometime.

For single bytes, exactly these strings are supported:

B, b, byte, bytes

For powers of ten, exactly these strings are supported:

kB, kilobyte, kilobytes
MB, megabyte, megabytes
GB, gigabyte, gigabytes
TB, terabyte, terabytes
PB, petabyte, petabytes
EB, exabyte, exabytes
ZB, zettabyte, zettabytes
YB, yottabyte, yottabytes

For powers of two, exactly these strings are supported:

K, k, Ki, KiB, kibibyte, kibibytes
M, m, Mi, MiB, mebibyte, mebibytes
G, g, Gi, GiB, gibibyte, gibibytes
T, t, Ti, TiB, tebibyte, tebibytes
P, p, Pi, PiB, pebibyte, pebibytes
E, e, Ei, EiB, exbibyte, exbibytes
Z, z, Zi, ZiB, zebibyte, zebibytes
Y, y, Yi, YiB, yobibyte, yobibytes

It's very unclear which units the single-character abbreviations ("128K") should go with; some precedents such as java -Xmx 2G and the GNU tools such as ls map these to powers of two, so this spec copies that. You can certainly find examples of mapping these to powers of ten, though. If you don't like ambiguity, don't use the single-letter abbreviations.

Note: any value in zetta/zebi or yotta/yobi will overflow a 64-bit integer, and of course large-enough values in any of the units may overflow. Most real-world APIs and apps will not support byte counts that overflow a 64-bit integer. The huge units are provided just to be complete but probably aren't useful in practice. At least not in 2014.

Config object merging and file merging

It may be useful to offer a method to merge two objects. If such a method is provided, it should work as if the two objects were duplicate values for the same key in the same file. (See the section earlier on duplicate key handling.)

As with duplicate keys, an intermediate non-object value "hides" earlier object values. So say you merge three objects in this order:

{ a : { x : 1 } } (first priority)
{ a : 42 } (fallback)
{ a : { y : 2 } } (another fallback)

The result would be { a : { x : 1 } }. The two objects are not merged because they are not "adjacent"; the merging is done in pairs, and when 42 is paired with { y : 2 }, 42 simply wins and loses all information about what it overrode.

But if you re-ordered like this:

{ a : { x : 1 } } (first priority)
{ a : { y : 2 } } (fallback)
{ a : 42 } (another fallback)

Now the result would be { a : { x : 1, y : 2 } } because the two objects are adjacent.

This rule for merging objects loaded from different files is exactly the same behavior as for merging duplicate fields in the same file. All merging works the same way.

Needless to say, normally it's well-defined whether a config setting is supposed to be a number or an object. This kind of weird pathology where the two are mixed should not be happening.

The one place where it matters, though, is that it allows you to "clear" an object and start over by setting it to null and then setting it back to a new object. So this behavior gives people a way to get rid of default fallback values they don't want.

Java properties mapping

It may be useful to merge Java properties data with data loaded from JSON or HOCON. See the Java properties spec here: https://docs.oracle.com/javase/8/docs/api/java/util/Properties.html#load-java.io.Reader-

Java properties parse as a one-level map from string keys to string values.

To convert to HOCON, first split each key on the . character, keeping any empty strings (including leading and trailing empty strings). Note that this is very different from parsing a path expression.

The key split on . is a series of path elements. So the properties key with just . is a path with two elements, both of them an empty string. a. is a path with two elements, a and empty string. (Java's String.split() does NOT do what you want for this.)

It is impossible to represent a key with a . in it in a properties file. If a JSON/HOCON key has a . in it, which is possible if the key is quoted, then there is no way to refer to it as a Java property. It is not recommended to name HOCON keys with a . in them, since it would be confusing at best in any case.

Once you have a path for each value, construct a tree of JSON-style objects with the string value of each property located at that value's path.

Values from properties files are always strings, even if they could be parsed as some other type. Implementations should do type conversion if an app asks for an integer, as described in an earlier section.

When Java loads a properties file, unfortunately it does not preserve the order of the file. As a result, there is an intractable case where a single key needs to refer to both a parent object and a string value. For example, say the Java properties file has:

a=hello
a.b=world

In this case, a needs to be both an object and a string value. The object must always win in this case... the "object wins" rule throws out at most one value (the string) while "string wins" would throw out all values in the object. Unfortunately, when properties files are mapped to the JSON structure, there is no way to access these strings that conflict with objects.

The usual rule in HOCON would be that the later assignment in the file wins, rather than "object wins"; but implementing that for Java properties would require implementing a custom Java properties parser, which is surely not worth it and wouldn't help with system properties anyway.

Conventional configuration files for JVM apps

By convention, JVM apps have two parts to their configuration:

the reference config is made up of all resources named reference.conf on the classpath, merged in the order they are returned by ClassLoader.getResources(); also, system property overrides are applied.
the application config can be loaded from anywhere an application likes, but by default if the application doesn't provide a config it would be loaded from files application.{conf,json,properties} on the classpath and then system property overrides are applied.
the reference config may be different for different class loaders, since each jar may provide a reference.conf to go with the code in that jar.
a single JVM may have multiple application configs if it has multiple modules or contexts of some kind.

The reference config for a given class loader should be merged and resolved first, and may be shared among all application configs in that class loader. Substitutions in the reference config are not affected by any application configs, because the reference config should be resolved by itself.

The application config should then be loaded, have the reference config added as a fallback, and have substitutions resolved. This means the application config can refer to the reference config in its substitutions.

Conventional override by system properties

For an application's config, Java system properties override settings found in the configuration file. This supports specifying config options on the command line.

Substitution fallback to environment variables

Recall that if a substitution is not present (not even set to null) within a configuration tree, implementations may search for it from external sources. One such source could be environment variables.

It's recommended that HOCON keys always use lowercase, because environment variables generally are capitalized. This avoids naming collisions between environment variables and configuration properties. (While on Windows getenv() is generally not case-sensitive, the lookup will be case sensitive all the way until the env variable fallback lookup is reached).

See also the notes below on Windows and case sensitivity.

An application can explicitly block looking up a substitution in the environment by setting a value in the configuration, with the same name as the environment variable. You could set HOME : null in your root object to avoid expanding ${HOME} from the environment, for example.

Environment variables are interpreted as follows:

env variables set to the empty string are kept as such (set to empty string, rather than undefined)
System.getenv throws SecurityException: treated as not present
encoding is handled by Java (System.getenv already returns a Unicode string)
environment variables always become a string value, though if an app asks for another type automatic type conversion would kick in

hyphen-separated vs. camelCase

Config keys are encouraged to be hyphen-separated rather than camelCase.

Note on Java properties similarity

You can write a HOCON file that looks much like a Java properties file, and many valid Java properties files will also parse as HOCON.

However, HOCON is not a Java properties superset and the corner cases work like JSON, not like properties.

Differences include but are probably not limited to:

certain characters that can be unquoted in properties files have to be placed in JSON-style double-quoted strings in HOCON
unquoted strings in HOCON do not support escape sequences
unquoted strings in HOCON do not preserve trailing whitespace
multi-line unquoted strings using backslash to continue the line are not allowed in HOCON
in properties files you can omit the value for a key and it's interpreted as an empty string, in HOCON you cannot omit the value
properties files support '!' as a comment character
HOCON allows comments on the same line as a key or value, while properties files only recognize comment characters if they occur as the first character on the line
HOCON interprets ${} as a substitution

Note on Windows and case sensitivity of environment variables

HOCON's lookup of environment variable values is always case sensitive, but Linux and Windows differ in their handling of case.

Linux allows one to define multiple environment variables with the same name but with different case; so both "PATH" and "Path" may be defined simultaneously. HOCON's access to these environment variables on Linux is straightforward; ie just make sure you define all your vars with the required case.

Windows is more confusing. Windows environment variables names may contain a mix of upper and lowercase characters, eg "Path", however Windows does not allow one to define multiple instances of the same name but differing in case. Whilst accessing env vars in Windows is case insensitive, accessing env vars in HOCON is case sensitive. So if you know that you HOCON needs "PATH" then you must ensure that the variable is defined as "PATH" rather than some other name such as "Path" or "path". However, Windows does not allow us to change the case of an existing env var; we can't simply redefine the var with an upper case name. The only way to ensure that your environment variables have the desired case is to first undefine all the env vars that you will depend on then redefine them with the required case.

For example, the the ambient environment might have this definition ...

set Path=A;B;C

.. we just don't know. But if the HOCON needs "PATH", then the start script must take a precautionary approach and enforce the necessary case as follows ...

set OLDPATH=%PATH%
set PATH=
set PATH=%OLDPATH%

%JAVA_HOME%/bin/java ....

You cannot know what ambient environment variables might exist in the ambient environment when your program is invoked, nor what case those definitions might have. Therefore the only safe thing to do is redefine all the vars you rely on as shown above.

61 KiB Raw Blame History

HOCON (Human-Optimized Config Object Notation)

Goals / Background

Definitions

Syntax

Unchanged from JSON

Comments

Omit root braces

Key-value separator

Commas

Whitespace

Duplicate keys and object merging

Unquoted strings

Multi-line strings

Value concatenation

String value concatenation

Array and object concatenation

Note: Concatenation with whitespace and substitutions

Note: Arrays without commas or newlines

Path expressions

Paths as keys

Substitutions

Self-Referential Substitutions

The += field separator

Examples of Self-Referential Substitutions

Includes

Include syntax

Include semantics: merging

Include semantics: substitution

Include semantics: missing files and required files

Include semantics: file formats and extensions

Include semantics: locating resources

Conversion of numerically-indexed objects to arrays

MIME Type

API Recommendations

Automatic type conversions

Units format

Duration format

Period Format

Size in bytes format

Config object merging and file merging

Java properties mapping

Conventional configuration files for JVM apps

Conventional override by system properties

Substitution fallback to environment variables

hyphen-separated vs. camelCase

Note on Java properties similarity

Note on Windows and case sensitivity of environment variables

61 KiB

Raw Blame History

The `+=` field separator