7.1 KiB
Translating by Ping How to set up a Replica Set on MongoDB
MongoDB has become the most famous NoSQL database on the market. MongoDB is document-oriented, and its scheme-free design makes it a really attractive solution for all kinds of web applications. One of the features that I like the most is Replica Set, where multiple copies of the same data set are maintained by a group of mongod nodes for redundancy and high availability.
This tutorial describes how to configure a Replica Set on MonoDB.
The most common configuration for a Replica Set involves one primary and multiple secondary nodes. The replication will then be initiated from the primary toward the secondaries. Replica Sets can not only provide database protection against unexpected hardware failure and service downtime, but also improve read throughput of database clients as they can be configured to read from different nodes.
Set up the Environment
In this tutorial, we are going to set up a Replica Set with one primary and two secondary nodes.
In order to implement this lab, we will use three virtual machines (VMs) running on VirtualBox. I am going to install Ubuntu 14.04 on the VMs, and install official packages for Mongodb.
I am going to set up a necessary environment on one VM instance, and then clone it to the other two VM instances. Thus pick one VM named master, and perform the following installations.
First, we need to add the MongoDB key for apt:
$ sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 7F0CEB10
Then we need to add the official MongoDB repository to our source.list:
$ sudo su
# echo "deb http://repo.mongodb.org/apt/ubuntu "$(lsb_release -sc)"/mongodb-org/3.0 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-3.0.list
Let's update repositories and install MongoDB.
$ sudo apt-get update
$ sudo apt-get install -y mongodb-org
Now let's make some changes in /etc/mongodb.conf.
auth = true
dbpath=/var/lib/mongodb
logpath=/var/log/mongodb/mongod.log
logappend=true
keyFile=/var/lib/mongodb/keyFile
replSet=myReplica
The first line is to make sure that we are going to have authentication on our database. keyFile is to set up a keyfile that is going to be used by MongoDB to replicate between nodes. replSet sets up the name of our replica set.
Now we are going to create our keyfile, so that it can be in all our instances.
$ echo -n "MyRandomStringForReplicaSet" | md5sum > keyFile
This will create keyfile that contains a MD5 string, but it has some noise that we need to clean up before using it in MongoDB. Use the following command to clean it up:
$ echo -n "MyReplicaSetKey" | md5sum|grep -o "[0-9a-z]\+" > keyFile
What grep command does is to print MD5 string with no spaces or other characters that we don't want.
Now we are going to make the keyfile ready for use:
$ sudo cp keyFile /var/lib/mongodb
$ sudo chown mongodb:nogroup keyFile
$ sudo chmod 400 keyFile
Now we have our Ubuntu VM ready to be cloned. Power it off, and clone it to the other VMs.
I name the cloned VMs secondary1 and secondary2. Make sure to reinitialize the MAC address of cloned VMs and clone full disks.
All three VM instances should be on the same network to communicate with each other. For this, we are going to attach all three VMs to "Internet Network".
It is recommended that each VM instances be assigned a static IP address, as opposed to DHCP IP address, so that the VMs will not lose connectivity among themselves when a DHCP server assigns different IP addresses to them.
Let's edit /etc/networks/interfaces of each VM as follows.
On primary:
auto eth1
iface eth1 inet static
address 192.168.50.2
netmask 255.255.255.0
On secondary1:
auto eth1
iface eth1 inet static
address 192.168.50.3
netmask 255.255.255.0
On secondary2:
auto eth1
iface eth1 inet static
address 192.168.50.4
netmask 255.255.255.0
Another file that needs to be set up is /etc/hosts, because we don't have DNS. We need to set the hostnames in /etc/hosts.
On primary:
127.0.0.1 localhost primary
192.168.50.2 primary
192.168.50.3 secondary1
192.168.50.4 secondary2
On secondary1:
127.0.0.1 localhost secondary1
192.168.50.2 primary
192.168.50.3 secondary1
192.168.50.4 secondary2
On secondary2:
127.0.0.1 localhost secondary2
192.168.50.2 primary
192.168.50.3 secondary1
192.168.50.4 secondary2
Check connectivity among themselves by using ping command:
$ ping primary
$ ping secondary1
$ ping secondary2
Set up a Replica Set
After verifying connectivity among VMs, we can go ahead and create the admin user so that we can start working on the Replica Set.
On primary node, open /etc/mongodb.conf, and comment out two lines that start with auth and replSet:
dbpath=/var/lib/mongodb
logpath=/var/log/mongodb/mongod.log
logappend=true
#auth = true
keyFile=/var/lib/mongodb/keyFile
#replSet=myReplica
Restart mongod daemon.
$ sudo service mongod restart
Create an admin user after conencting to MongoDB:
> use admin
> db.createUser({
user:"admin",
pwd:"
})
$ sudo service mongod restart
Connect to MongoDB and use these commands to add secondary1 and secondary2 to our Replicat Set.
> use admin
> db.auth("admin","myreallyhardpassword")
> rs.initiate()
> rs.add ("secondary1:27017")
> rs.add("secondary2:27017")
Now that we have our Replica Set, we can start working on our project. Consult the official driver documentation to see how to connect to a Replica Set. In case you want to query from shell, you have to connect to primary instance to insert or query the database. Secondary nodes will not let you do that. If you attempt to access the database on a secondary node, you will get this error message:
myReplica:SECONDARY>
myReplica:SECONDARY> show databases
2015-05-10T03:09:24.131+0000 E QUERY Error: listDatabases failed:{ "note" : "from execCommand", "ok" : 0, "errmsg" : "not master" }
at Error ()
at Mongo.getDBs (src/mongo/shell/mongo.js:47:15)
at shellHelper.show (src/mongo/shell/utils.js:630:33)
at shellHelper (src/mongo/shell/utils.js:524:36)
at (shellhelp2):1:1 at src/mongo/shell/mongo.js:47
I hope you find this tutorial useful. You can use Vagrant to automate your local environments and help you code faster.
via: http://xmodulo.com/setup-replica-set-mongodb.html
作者：Christopher Valerio 译者：译者ID 校对：校对者ID