mirror of
https://github.com/LCTT/TranslateProject.git
synced 2025-01-22 23:00:57 +08:00
79 lines
3.6 KiB
Markdown
79 lines
3.6 KiB
Markdown
[#]: subject: "Build Your Own Handheld Linux PC with Raspberry Pi and this Open Source Project"
|
||
[#]: via: "https://news.itsfoss.com/penkesu-handheld-linux-pc/"
|
||
[#]: author: "John Paul https://news.itsfoss.com/author/john/"
|
||
[#]: collector: "lujun9972"
|
||
[#]: translator: "geekpi"
|
||
[#]: reviewer: " "
|
||
[#]: publisher: " "
|
||
[#]: url: " "
|
||
|
||
Build Your Own Handheld Linux PC with Raspberry Pi and this Open Source Project
|
||
======
|
||
|
||
Have you every wished that you had a Linux powered laptop that fits in your hand, complete with keyboard? If you said, yes, then you are in luck. A hardware designer has created such a device and open-sourced the design so that anyone can make it at home.
|
||
|
||
### What is it?
|
||
|
||
![][1]
|
||
|
||
The Penkēsu Computer (Penkēsu is Japanese for pencil case) was designed by [Penk Chen][2]. If that name sounds familiar, he’s the designer behind the [CutiePi][3].
|
||
|
||
According to the website, Penk created this project because:
|
||
|
||
> Ever since the CutiePi tablet has been successfully funded and started shipping, I feel the need to work on a new project, something I don’t need to worry too much about commercial viability, and to remind myself why I started tinkering. A “rebound” project, so to speak.
|
||
|
||
He also said that he doesn’t have any plans to mass produce the Penkēsu at this time, so he open-sourced the plans. “I’d like to publish all the designs and plans so there’s enough information for anyone interested in making one.”
|
||
|
||
### The Parts
|
||
|
||
![][1]
|
||
|
||
Penk designed the Penkēsu around a 7.9 inch touchscreen and a custom keyboard. The internals are powered by a Raspberry Pi Zero 2 W and a Li-Po battery. The Raspberry Pi Zero 2 W has a 1 GHz ARM quad-core ARM Cortex-A53 processor and 512MB of RAM. For $15, that should run most Linux distros designed for the Pi.
|
||
|
||
Interestingly, Penk said that “my 3D printer is not accurate enough to print a fully functional hinge lock”. So, he decided to use replacement hinges from a Game Boy Advance SP.
|
||
|
||
The most difficult looking part is the keyboard, which involves a custom PCB. Penk does note that “If one wishes to use other 40% keyboard for the build, it can be done by editing the CAD file and adjusting the compartment size in the chassis”.
|
||
|
||
Here is the full list of required parts:
|
||
|
||
* Display
|
||
* Waveshare 7.9 inch Capacitive Touch Screen
|
||
* Adafruit DIY HDMI Cable Parts – Right Angle adapter, Mini HDMI adapter, and 20 cm Ribbon Cable
|
||
* Case
|
||
* Game Boy Advance SP Replacement Hinges
|
||
* 3D printed parts (STL files and STEP file)
|
||
* Electronics
|
||
* Raspberry Pi Zero 2 W
|
||
* 3.7V 606090 (or similar size) Li-Po battery
|
||
* Adafruit PowerBoost 1000C
|
||
* Keyboard
|
||
* Kailh Low Profile Choc V1 Switches x 48
|
||
* MBK Choc Low Profile Keycaps x 48
|
||
* 1N4148 Diode x 48
|
||
* Arduino Pro Micro x 1
|
||
* PCB x 1 (gerber file and QMK firmware)
|
||
|
||
|
||
|
||
See the [website][4] for complete details.
|
||
|
||
What project have you made with a Raspberry Pi? Share in the comments below.
|
||
|
||
--------------------------------------------------------------------------------
|
||
|
||
via: https://news.itsfoss.com/penkesu-handheld-linux-pc/
|
||
|
||
作者：[John Paul][a]
|
||
选题：[lujun9972][b]
|
||
译者：[译者ID](https://github.com/译者ID)
|
||
校对：[校对者ID](https://github.com/校对者ID)
|
||
|
||
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出
|
||
|
||
[a]: https://news.itsfoss.com/author/john/
|
||
[b]: https://github.com/lujun9972
|
||
[1]: data:image/svg+xml;base64,PHN2ZyBoZWlnaHQ9IjU4NSIgd2lkdGg9Ijc4MCIgeG1sbnM9Imh0dHA6Ly93d3cudzMub3JnLzIwMDAvc3ZnIiB2ZXJzaW9uPSIxLjEiLz4=
|
||
[2]: https://github.com/penk
|
||
[3]: https://itsfoss.com/cutiepi-open-source-tab/
|
||
[4]: http://penkesu.computer/
|