document/TranslateProject
2
0
Fork 0
mirror of https://github.com/LCTT/TranslateProject.git synced 2024-12-29 21:41:00 +08:00
Code Issues Packages Projects Releases Wiki Activity
73649dd797
TranslateProject/sources/tech/20230816 How to Install Veritas Cluster Server 8.0 in RHEL.md
DarkSun 953b498624 选题[tech]: 20230816 How to Install Veritas Cluster Server 8.0 in RHEL 
sources/tech/20230816 How to Install Veritas Cluster Server 8.0 in RHEL.md
2023-08-16 12:17:45 +08:00

413 lines
20 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

[#]: subject: "How to Install Veritas Cluster Server 8.0 in RHEL"
[#]: via: "https://www.2daygeek.com/install-veritas-cluster-server-vcs-rhel-linux/"
[#]: author: "Jayabal Thiyagarajan https://www.2daygeek.com/author/jayabal/"
[#]: collector: "lujun9972"
[#]: translator: " "
[#]: reviewer: " "
[#]: publisher: " "
[#]: url: " "
How to Install Veritas Cluster Server 8.0 in RHEL
======
Veritas Cluster Server, commonly known as VCS, is used by organizations around the world to host their mission-critical applications and ensure always-on high availability for their hosted applications.
This ensure when a node or application fails, other nodes can take predefined actions to take over and bring up services elsewhere in the cluster.
* **[How to Create VxVM Volume and Filesystem in Linux][1]**
* **[How to Create Shared VxFS FileSystem on Linux][2]**
* **[How to Extend/Increase VxFS Filesystem in Linux][3]**
VCS setup can be done in two ways based on the application requirement.
* VCS Cluster Active-Active (AA) Setup – It has CVM, and the file system is available across the node simultaneously.
* VCS Cluster Active-Passive (AP) Setup -FS can only be mounted on an active system, not on a passive system.
In this article, we’ll demonstrate how to install Veritas Cluster Server (VCS) Active-Active (AA) 8.0 on Linux (RHEL 8.8).
### Our lab setup:
* Two node Active-Active VCS cluster with RHEL 8.8
* Node1 – 2gvcsnode1 – 192.168.10.110
* Node2 – 2gvcsnode2 – 192.168.10.111
* Storage Foundation Cluster File System HA (SFCFSHA)
### Prerequisites
* Each node must have three interfaces (One used as public interface for Heartbeat & Two private interfaces used for VCS cluster inter communication to share the resources across both the nodes)
* Three 1GB disks should mapped to both the node in shared mode for fencing setup.
* Setup password-less login between the system.
* DNS configuration and local host entries
* Disable selinux
* Disable [**firewalld**][4], if it’s mandatory allow required ports.
* [**Configure NTP/Chrony**][5]
### Adding Local Host entry
Even if you have DNS entry it’s safe to add a localhost entry in all nodes. Run the below command in both the node.
```
cp -p /etc/hosts /etc/hosts_bkp-$(date +%d-%m-%Y)
echo "
192.168.10.110 vcs1.2gvcsnode1.local vcs1
192.168.10.111 vcs2.2gvcsnode2.local vcs2" >> /etc/hosts
```
### Downloading Veritas InfoScale
[Veritas InfoScale][6] can be downloaded from the portal if you have an active account with Veritas support. If not, trial version (free for 60 Days) can be downloaded.
Also, visit [sort.veritas][7] url and perform the compatibility check for supported kernels. As on today ( **24-June-2023** ) Veritas InfoScale **8.0.2** only support **4.18.0-372.32.1** kernel, which is not possible to install on RHEL 8.8, so we are going with Veritas InfoScale 8.0.
As part of this installation you must include a list of patches (CPI, Hotfixes and/or Cumulative), because the base package doesn’t support the latest kernel for some modules.
We have verified the Veritas site and found that the below three patches must be included in the base package for successful installation of Veritas InfoScale 8.0 on RHEL 8.8, So download below four packages and upload to the target server.
```
Veritas_InfoScale_8.0_RHEL.tar.gz #Base Package
cpi-Patch-8.0.0.1400.tar.gz #CPI Patch
infoscale-rhel8_x86_64-Patch-8.0.0.1800.tar.gz #Cumulative Patch
infoscale-rhel8.7_x86_64-Patch-8.0.0.2600.tar.gz #Common Updates Patch
infoscale-rhel8.8_x86_64-Patch-8.0.0.2700.tar.gz #RHEL8.8 Patch
```
### Creating directory structure
Create a proper directory structure and move the files to respective directory to avoid confusion. I have created the following directories as per my convenient.
```
/backup/vcs8 #Base Package Path
/backup/vcs8_cpi_patch_1400 #CPI_Patch Path
/backup/vcs8_patch_1800 #Patch_1 Path
/backup/vcs8_patch_2600 #Patch_2 Path
/backup/vcs8_patch_2700 #Patch_3 Path
```
### Extracting the Packages
Extract the packages to respective location as created above.
```
tar -xf Veritas_InfoScale_8.0_RHEL.tar.gz -C /backup/vcs8
tar -xf cpi-Patch-8.0.0.1400.tar.gz -C /backup/vcs8_cpi_patch_1400
tar -xf infoscale-rhel8_x86_64-Patch-8.0.0.1800.tar.gz -C /backup/vcs8_patch_1800
tar -xf infoscale-rhel8.7_x86_64-Patch-8.0.0.2600.tar.gz -C /backup/vcs8_patch_2600
tar -xf infoscale-rhel8.8_x86_64-Patch-8.0.0.2700.tar.gz -C /backup/vcs8_patch_2700
```
### Performing Pre-Installation Check
It’s always recommend to run pre-installation check, which will ensure all required RPMs are already installed on the given systems. If it’s found missing RPMs that can be installed on the fly.
```
Syntax:
./installer -require [Path_to_the_CPI_Script] -patch_path [Path_to_the_patch 1] -patch2_path [Path_to_the_patch 2] -patch3_path [Path_to_the_patch 3]
```
Navigate to VCS 8.0 base directory and run installer as shown below (Please use your package location instead of ours).
```
cd /backup/vcs8/dvd1-redhatlinux/rhel8_x86_64
./installer -require /backup/vcs8_cpi_patch_1400/CPI_8.0.0_P14.pl -patch_path /backup/vcs8_patch_1800 -patch2_path /backup/vcs8_patch_2600 -patch3_path /backup/vcs8_patch_2700
```
When you run, it will prompt with many options as shown below. Input **`'P'`** and hit **`'Enter'`** to perform pre-installation check.
![][8]
Now, select which product you want to check. In our case, it’s Veritas InfoScale Enterprise, so input **`'4'`** and hit **`'Enter'`**.
```
Veritas InfoScale Storage and Availability Solutions 8.0 Precheck Program
1) Veritas InfoScale Foundation
2) Veritas InfoScale Availability
3) Veritas InfoScale Storage
4) Veritas InfoScale Enterprise
b) Back to previous menu
Select a product to perform pre-installation check for: [1-4,b,q] 4
```
As we are planning to install Storage Foundation Cluster File System HA (SFCFSHA) component, so input **`'4'`** and hit **`'Enter'`**. Also, you need to enter a list of systems you want to perform pre-checks on.
```
Veritas InfoScale Storage and Availability Solutions 8.0 Precheck Program
1) Cluster Server (VCS)
2) Storage Foundation (SF)
3) Storage Foundation and High Availability (SFHA)
4) Storage Foundation Cluster File System HA (SFCFSHA)
5) Storage Foundation for Oracle RAC (SF Oracle RAC)
Select a component to perform pre-installation check for: [1-5,q] 4
```
Enter the system name that you want to pre-check. This is a two-node cluster setup, so enter both hostname and press **`'Enter'`**.
```
Enter the system names separated by spaces: [q,?] 2gvcsnode1 2gvcsnode2
```
Now, installer perform following checks and report if anything fails. Sometime it may report you as failed due to missing RPMs and it will give you an another option to install via yum or manually. If you find missing RPMs, enter **`'1'`** and press **`'Enter'`** to install those RPMs.
```
Veritas InfoScale Enterprise 8.0 Precheck Program
2gvcsnode1 2gvcsnode2
Logs are being written to /var/tmp/installer-202306231445nLK while installer is in progress
Verifying systems: 100%
Estimated time remaining: (mm:ss) 0:00 8 of 8
Checking system communication .......................................................................... Done
Checking release compatibility ......................................................................... Done
Checking installed product ............................................................................. Done
Checking platform version .............................................................................. Done
Checking prerequisite patches and rpms ....................................................... Partially Done
Checking file system free space ........................................................................ Done
Checking configured component .......................................................................... Done
Performing product prechecks ........................................................................... Done
The following required OS rpms were not found on vcsnode1:
net-tools.x86_64 bc.x86_64 ksh.x86_64
The following required OS rpms were not found on vcsnode2:
net-tools.x86_64 bc.x86_64 ksh.x86_64
The installer provides some guidance about how to install OS rpms using native methods, like yum, or how to manually install the required OS rpms.
1) Install the missing required OS rpms with yes, if yes is configured on the systems
2) Install the missing required OS rpms manually, (detailed steps are provided)
3) Do not install the missing required OS rpms
How would you like to install the missing required OS rpms? [1-3,q,?] (1)
The installation may take a few minutes, be patient.
Install the missing OS rpms with yum on vcsnode1 ................................................. Done
Install the missing OS rpms with yum on vcsnode2 ................................................. Done
Press [Enter] to continue:
```
Once RPMs installation done, at this point, Precheck will be re-run and you will get the output similar to the below one.
```
Veritas InfoScale Enterprise 8.0 Precheck Program
2gvcsnode1 2gvcsnode2
Logs are being written to /var/tmp/installer-202306231445nLK while installer is in progress
Verifying systems: 100%
Estimated time remaining: (mm:ss) 0:00 8 of 8
Checking system communication .......................................................................... Done
Checking release compatibility ......................................................................... Done
Checking installed product ............................................................................. Done
Checking platform version .............................................................................. Done
Checking prerequisite patches and rpms ................................................................. Done
Checking file system free space ........................................................................ Done
Checking configured component .......................................................................... Done
Performing product prechecks ........................................................................... Done
Precheck report completed
System verification checks completed successfully
The following notes were discovered on the systems:
CPI NOTE V-9-30-1021: he system information on 2gvcsnode1:
Operating system: Linux RHEL 8.8 86_64
CPU number: 4
CPU speed: 2693 MHz
Memory size: 7963 MB
Swap size: 9207 MB
CPI NOTE V-9-30-1021: he system information on 2gvcsnode1:
Operating system: Linux RHEL 8.8 86_64
CPU number: 4
CPU speed: 2693 MHz
Memory size: 7963 MB
Swap size: 9207 MB
The following warnings were discovered on the systems:
CPI WARNING V-9-40-1400 vmware-tools is not running on vcsnode1, installer attempted to start it but failed.
Please start the tool before installing Veritas InfoScale Enterprise
CPI WARNING V-9-40-1418 Kernel Release 4.18.0-477.13.1.el8_8.x86_64 is detected on vcsnode1, which is not
recognizable by the installer. It is strongly recommended to check it on SORT (https://sort.veritas.com) before
continue.
CPI WARNING V-9-40-1401 vmware-tools is not running on vcsnode2, installer attempted to start it but failed.
Please start the tool before installing Veritas InfoScale Enterprise
CPI WARNING V-9-40-1418 Kernel Release 4.18.0-477.13.1.el8_8.x86_64 is detected on vcsnode2, which is not
recognizable by the installer. It is strongly recommended to check it on SORT (https://sort.veritas.com) before
continue.
```
### Installing Veritas InfoScale Enterprise
As pre-installation checks were completed successfully, it’s time to install Veritas InfoScale Enterprise. Enter **`'y'`** for the below questions to begin the installation.
```
Would you like to install InfoScale Enterprise on 2gvcsnode1 2gvcsnode2? [y,n,q] (n) y
This product may contain open source and other third party materials that are subject to a separate license. See the
applicable Third-Party Notice at https://www.veritas.com/about/legal/license-agreements
Do you agree with the terms of the End User License Agreement as specified in the EULA/en/EULA.pdf file present on media? [y,n,q,?] y
```
Veritas InfoScale Enterprise installation is in progress.
```
Veritas InfoScale Enterprise 8.0 Install Program
2gvcsnode1 2gvcsnode2
Logs are being written to /var/tmp/installer-202306231445nLK while installer is in progress
Installing InfoScale Enterprise: 100%
Estimated time remaining: (mm:ss) 0:00 31 of 31
Performing InfoScale Enterprise preinstall tasks ....................................................... Done
Installing VRTSperl rpm ................................................................................ Done
Installing VRTSpython rpm .............................................................................. Done
Installing VRTSvlic rpm ................................................................................ Done
Installing VRTSspt rpm ................................................................................. Done
Installing VRTSveki rpm ................................................................................ Done
Installing VRTSvxvm rpm ................................................................................ Done
Installing VRTSaslapm rpm .............................................................................. Done
Installing VRTSvxfs rpm ................................................................................ Done
Installing VRTSfsadv rpm ............................................................................... Done
Installing VRTSllt rpm ................................................................................. Done
Installing VRTSgab rpm ................................................................................. Done
Installing VRTSvxfen rpm ............................................................................... Done
Installing VRTSamf rpm ................................................................................. Done
Installing VRTSvcs rpm ................................................................................. Done
Installing VRTScps rpm ................................................................................. Done
Installing VRTSvcsag rpm ............................................................................... Done
Installing VRTSvcsea rpm ............................................................................... Done
Installing VRTSrest rpm ................................................................................ Done
Installing VRTScsi rpm ................................................................................. Done
Installing VRTSdbed rpm ................................................................................ Done
Installing VRTSglm rpm ................................................................................. Done
Installing VRTScavf rpm ................................................................................ Done
Installing VRTSgms rpm ................................................................................. Done
Installing VRTSodm rpm ................................................................................. Done
Installing VRTSdbac rpm ................................................................................ Done
Installing VRTSsfmh rpm ................................................................................ Done
Installing VRTSvbs rpm ................................................................................. Done
Installing VRTSsfcpi rpm ............................................................................... Done
Installing VRTSvcswiz rpm .............................................................................. Done
Performing InfoScale Enterprise postinstall tasks ...................................................... Done
Veritas InfoScale Enterprise Install completed successfully
```
### Veritas License Activation
VCS installation is completed, so activate the license as shown below.
```
To comply with the terms of our End User License Agreement, you have 60 days to either:
* Enter a valid license key matching the functionality in use on the systems
* Enable keyless licensing and manage the systems with a Management Server. For more details visit
http://www.veritas.com/community/blogs/introducing-keyless-feature-enablement-storage-foundation-ha-51. The product is fully functional during these 60 days.
1) Enter a valid license key(Key file path needed)
2) Enable keyless licensing and complete system licensing later
How would you like to license the systems? [1-2,q] (2)
1) Veritas Infoscale Foundation
2) Veritas Infoscale Availability
3) Veritas Infoscale Storage
4) Veritas Infoscale Enterprise
b) Back to previous menu
Which product would you like to register? [1-4,b,q] (4)
Registering keyless key ENTERPRISE on Veritas InfoScale Enterprise
Successfully registered ENTERPRISE keyless key on 2gvcsnode1
Successfully registered ENTERPRISE keyless key on 2gvcsnode2
```
Veritas InfoScale Enterprise VCS installation has been completed.
##### Wrapping Up
In this tutorial, we’ve shown you how to install Veritas Cluster Server (VCS) on Linux (RHEL 8.8).
In the next post, we’ll show you **[how to configure the Veritas Cluster Server 8.0 on RHEL8.8][9]**.
If you have any questions or feedback, feel free to comment below.
--------------------------------------------------------------------------------
via: https://www.2daygeek.com/install-veritas-cluster-server-vcs-rhel-linux/
作者：[Jayabal Thiyagarajan][a]
选题：[lujun9972][b]
译者：[译者ID](https://github.com/译者ID)
校对：[校对者ID](https://github.com/校对者ID)
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出
[a]: https://www.2daygeek.com/author/jayabal/
[b]: https://github.com/lujun9972
[1]: https://www.2daygeek.com/create-vxvm-volume-vxfs-filesystem-linux/
[2]: https://www.2daygeek.com/create-veritas-shared-vxfs-file-system-linux/
[3]: https://www.2daygeek.com/increase-extend-veritas-fileystem-linux/
[4]: https://www.2daygeek.com/linux-beginners-guide-firewalld/
[5]: https://www.2daygeek.com/configure-ntp-client-using-chrony-in-linux/
[6]: https://www.veritas.com/form/trialware/infoscale-solutions
[7]: https://sort.veritas.com/home
[8]: https://www.2daygeek.com/wp-content/uploads/2023/06/veritas-cluster-server-installation-1024x423.jpg
[9]: https://www.2daygeek.com/configure-veritas-cluster-server-vcs-rhel-linux/
Reference in New Issue View Git Blame Copy Permalink