TranslateProject/sources/tech/20190909 How to Setup Multi Node Elastic Stack Cluster on RHEL 8 - CentOS 8.md

How to Setup Multi Node Elastic Stack Cluster on RHEL 8 / CentOS 8

Elastic stack widely known as ELK stack, it is a group of opensource products like Elasticsearch, Logstash and Kibana. Elastic Stack is developed and maintained by Elastic company. Using elastic stack, one can feed system’s logs to Logstash, it is a data collection engine which accept the logs or data from all the sources and normalize logs and then it forwards the logs to Elasticsearch for analyzing, indexing, searching and storing and finally using Kibana one can represent the visualize data, using Kibana we can also create interactive graphs and diagram based on user’s queries.

In this article we will demonstrate how to setup multi node elastic stack cluster on RHEL 8 / CentOS 8 servers. Following are details for my Elastic Stack Cluster:

Elasticsearch:

• Three Servers with Minimal RHEL 8 / CentOS 8
• IPs & Hostname – 192.168.56.40 (elasticsearch1.linuxtechi. local), 192.168.56.50 (elasticsearch2.linuxtechi. local), 192.168.56.60 (elasticsearch3.linuxtechi. local)

Logstash:

• Two Servers with minimal RHEL 8 / CentOS 8
• IPs & Hostname – 192.168.56.20 (logstash1.linuxtechi. local) , 192.168.56.30 (logstash2.linuxtechi. local)

Kibana:

• One Server with minimal RHEL 8 / CentOS 8
• Hostname – kibana.linuxtechi.local
• IP – 192.168.56.10

Filebeat:

• One Server with minimal CentOS 7
• IP & hostname – 192.168.56.70 (web-server)

Let’s start with Elasticsearch cluster setup,

Setup 3 node Elasticsearch cluster

As I have already stated that I have kept nodes for Elasticsearch cluster, login to each node, set the hostname and configure yum/dnf repositories.

Use the below hostnamectl command to set the hostname on respective nodes,

[root@linuxtechi ~]# hostnamectl set-hostname "elasticsearch1.linuxtechi. local"
[root@linuxtechi ~]# exec bash
[root@linuxtechi ~]#
[root@linuxtechi ~]# hostnamectl set-hostname "elasticsearch2.linuxtechi. local"
[root@linuxtechi ~]# exec bash
[root@linuxtechi ~]#
[root@linuxtechi ~]# hostnamectl set-hostname "elasticsearch3.linuxtechi. local"
[root@linuxtechi ~]# exec bash
[root@linuxtechi ~]#

For CentOS 8 System we don’t need to configure any OS package repository and for RHEL 8 Server, if you have valid subscription and then subscribed it with Red Hat for getting package repository.  In Case you want to configure local yum/dnf repository for OS packages then refer the below url:

How to Setup Local Yum/DNF Repository on RHEL 8 Server Using DVD or ISO File

Configure Elasticsearch package repository on all the nodes, create a file elastic.repo  file under /etc/yum.repos.d/ folder with the following content

~]# vi /etc/yum.repos.d/elastic.repo
[elasticsearch-7.x]
name=Elasticsearch repository for 7.x packages
baseurl=https://artifacts.elastic.co/packages/7.x/yum
gpgcheck=1
gpgkey=https://artifacts.elastic.co/GPG-KEY-elasticsearch
enabled=1
autorefresh=1
type=rpm-md

save & exit the file

Use below rpm command on all three nodes to import Elastic’s public signing key

~]# rpm --import https://artifacts.elastic.co/GPG-KEY-elasticsearch

Add the following lines in /etc/hosts file on all three nodes,

192.168.56.40             elasticsearch1.linuxtechi.local
192.168.56.50             elasticsearch2.linuxtechi.local
192.168.56.60             elasticsearch3.linuxtechi.local

Install Java on all three Nodes using yum / dnf command,

[root@linuxtechi ~]# dnf install java-openjdk -y
[root@linuxtechi ~]# dnf install java-openjdk -y
[root@linuxtechi ~]# dnf install java-openjdk -y

Install Elasticsearch using beneath dnf command on all three nodes,

[root@linuxtechi ~]# dnf install elasticsearch -y
[root@linuxtechi ~]# dnf install elasticsearch -y
[root@linuxtechi ~]# dnf install elasticsearch -y

Note: In case OS firewall is enabled and running in each Elasticsearch node then allow following ports using beneath firewall-cmd command,

~]# firewall-cmd --permanent --add-port=9300/tcp
~]# firewall-cmd --permanent --add-port=9200/tcp
~]# firewall-cmd --reload

Configure Elasticsearch, edit the file “/etc/elasticsearch/elasticsearch.yml” on all the three nodes and add the followings,

~]# vim /etc/elasticsearch/elasticsearch.yml
…………………………………………
cluster.name: opn-cluster
node.name: elasticsearch1.linuxtechi.local
network.host: 192.168.56.40
http.port: 9200
discovery.seed_hosts: ["elasticsearch1.linuxtechi.local", "elasticsearch2.linuxtechi.local", "elasticsearch3.linuxtechi.local"]
cluster.initial_master_nodes: ["elasticsearch1.linuxtechi.local", "elasticsearch2.linuxtechi.local", "elasticsearch3.linuxtechi.local"]
……………………………………………

Note: on Each node, add the correct hostname in node.name parameter and ip address in network.host parameter and other parameters will remain the same.

Now Start and enable the Elasticsearch service on all three nodes using following systemctl command,

~]# systemctl daemon-reload
~]# systemctl enable elasticsearch.service
~]# systemctl start elasticsearch.service

Use below ‘ss’ command to verify whether elasticsearch node is start listening on 9200 port,

[root@linuxtechi ~]# ss -tunlp | grep 9200
tcp   LISTEN  0       128       [::ffff:192.168.56.40]:9200              *:*     users:(("java",pid=2734,fd=256))
[root@linuxtechi ~]#

Use following curl commands to verify the Elasticsearch cluster status

[root@linuxtechi ~]# curl  http://elasticsearch1.linuxtechi.local:9200
[root@linuxtechi ~]# curl -X GET  http://elasticsearch2.linuxtechi.local:9200/_cluster/health?pretty

Output above command would be something like below,

Above output confirms that we have successfully created 3 node Elasticsearch cluster and status of cluster is also green.

Note: If you want to modify JVM heap size then you have edit the file “/etc/elasticsearch/jvm.options” and change the below parameters that suits to your environment,

• -Xms1g
• -Xmx1g

Now let’s move to Logstash nodes,

Install and Configure Logstash

Perform the following steps on both Logstash nodes,

Login to both the nodes set the hostname using following hostnamectl command,

[root@linuxtechi ~]# hostnamectl set-hostname "logstash1.linuxtechi.local"
[root@linuxtechi ~]# exec bash
[root@linuxtechi ~]#
[root@linuxtechi ~]# hostnamectl set-hostname "logstash2.linuxtechi.local"
[root@linuxtechi ~]# exec bash
[root@linuxtechi ~]#

Add the following entries in /etc/hosts file in both logstash nodes

~]# vi /etc/hosts
192.168.56.40             elasticsearch1.linuxtechi.local
192.168.56.50             elasticsearch2.linuxtechi.local
192.168.56.60             elasticsearch3.linuxtechi.local

Save and exit the file

Configure Logstash repository on both the nodes, create a file logstash.repo under the folder /ete/yum.repos.d/ with following content,

~]# vi /etc/yum.repos.d/logstash.repo
[elasticsearch-7.x]
name=Elasticsearch repository for 7.x packages
baseurl=https://artifacts.elastic.co/packages/7.x/yum
gpgcheck=1
gpgkey=https://artifacts.elastic.co/GPG-KEY-elasticsearch
enabled=1
autorefresh=1
type=rpm-md

Save and exit the file, run the following rpm command to import the signing key

~]# rpm --import https://artifacts.elastic.co/GPG-KEY-elasticsearch

Install Java OpenJDK on both the nodes using following dnf command,

~]# dnf install java-openjdk -y

Run the following dnf command from both the nodes to install logstash,

[root@linuxtechi ~]# dnf install logstash -y
[root@linuxtechi ~]# dnf install logstash -y

Now configure logstash, perform below steps on both logstash nodes,

Create a logstash conf file, for that first we have copy sample logstash file under ‘/etc/logstash/conf.d/’

# cd /etc/logstash/
# cp logstash-sample.conf conf.d/logstash.conf

Edit conf file and update the following content,

# vi conf.d/logstash.conf

input {
  beats {
    port => 5044
  }
}

output {
  elasticsearch {
    hosts => ["http://elasticsearch1.linuxtechi.local:9200", "http://elasticsearch2.linuxtechi.local:9200", "http://elasticsearch3.linuxtechi.local:9200"]
    index => "%{[@metadata][beat]}-%{[@metadata][version]}-%{+YYYY.MM.dd}"
    #user => "elastic"
    #password => "changeme"
  }
}

Under output section, in hosts parameter specify FQDN of all three Elasticsearch nodes, other parameters leave as it is.

Allow logstash port “5044” in OS firewall using following firewall-cmd command,

~ # firewall-cmd --permanent --add-port=5044/tcp
~ # firewall-cmd –reload

Now start and enable Logstash service, run the following systemctl commands on both the nodes

~]# systemctl start logstash
~]# systemctl eanble logstash

Use below ss command to verify whether logstash service start listening on 5044,

[root@linuxtechi ~]# ss -tunlp | grep 5044
tcp   LISTEN  0       128                         *:5044                *:*      users:(("java",pid=2416,fd=96))
[root@linuxtechi ~]#

Above output confirms that logstash has been installed and configured successfully. Let’s move to Kibana installation.

Install and Configure Kibana

Login to Kibana node, set the hostname with hostnamectl command,

[root@linuxtechi ~]# hostnamectl set-hostname "kibana.linuxtechi.local"
[root@linuxtechi ~]# exec bash
[root@linuxtechi ~]#

Edit /etc/hosts file and add the following lines

192.168.56.40             elasticsearch1.linuxtechi.local
192.168.56.50             elasticsearch2.linuxtechi.local
192.168.56.60             elasticsearch3.linuxtechi.local

Setup the Kibana repository using following,

[root@linuxtechi ~]# vi /etc/yum.repos.d/kibana.repo
[elasticsearch-7.x]
name=Elasticsearch repository for 7.x packages
baseurl=https://artifacts.elastic.co/packages/7.x/yum
gpgcheck=1
gpgkey=https://artifacts.elastic.co/GPG-KEY-elasticsearch
enabled=1
autorefresh=1
type=rpm-md

[root@linuxtechi ~]# rpm --import https://artifacts.elastic.co/GPG-KEY-elasticsearch

Execute below dnf command to install kibana,

[root@linuxtechi ~]# yum install kibana -y

Configure Kibana by editing the file “/etc/kibana/kibana.yml”

[root@linuxtechi ~]# vim /etc/kibana/kibana.yml
…………
server.host: "kibana.linuxtechi.local"
server.name: "kibana.linuxtechi.local"
elasticsearch.hosts: ["http://elasticsearch1.linuxtechi.local:9200", "http://elasticsearch2.linuxtechi.local:9200", "http://elasticsearch3.linuxtechi.local:9200"]
…………

Start and enable kibana service

[root@linuxtechi ~]# systemctl start kibana
[root@linuxtechi ~]# systemctl enable kibana

Allow Kibana port ‘5601’ in OS firewall,

[root@linuxtechi ~]# firewall-cmd --permanent --add-port=5601/tcp
success
[root@linuxtechi ~]# firewall-cmd --reload
success
[root@linuxtechi ~]#

Access Kibana portal / GUI using the following URL:

http://kibana.linuxtechi.local:5601

From dashboard, we can also check our Elastic Stack cluster status

This confirms that we have successfully setup multi node Elastic Stack cluster on RHEL 8 / CentOS 8.

Now let’s send some logs to logstash nodes via filebeat from other Linux servers, In my case I have one CentOS 7 Server, I will push all important logs of this server to logstash via filebeat.

Login to CentOS 7 server and install filebeat package using following rpm command,

[root@linuxtechi ~]# rpm -ivh https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-7.3.1-x86_64.rpm
Retrieving https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-7.3.1-x86_64.rpm
Preparing...                          ################################# [100%]
Updating / installing...
   1:filebeat-7.3.1-1                 ################################# [100%]
[root@linuxtechi ~]#

Edit the /etc/hosts file and add the following entries,

192.168.56.20             logstash1.linuxtechi.local
192.168.56.30             logstash2.linuxtechi.local

Now configure the filebeat so that it can send logs to logstash nodes using load balancing technique, edit the file “/etc/filebeat/filebeat.yml” and add the following parameters,

Under the ‘filebeat.inputs:’ section change ‘enabled: false‘ to ‘enabled: true‘ and under the “paths” parameter specify the location log files that we can send to logstash, In output Elasticsearch section comment out “output.elasticsearch” and host parameter. In Logstash output section, remove the comments for “output.logstash:” and “hosts:” and add the both logstash nodes in hosts parameters and also “loadbalance: true”.

[root@linuxtechi ~]# vi /etc/filebeat/filebeat.yml
……………………….
filebeat.inputs:
- type: log
  enabled: true
  paths:
    - /var/log/messages
    - /var/log/dmesg
    - /var/log/maillog
    - /var/log/boot.log
#output.elasticsearch:
  #  hosts: ["localhost:9200"]

output.logstash:
    hosts: ["logstash1.linuxtechi.local:5044", "logstash2.linuxtechi.local:5044"]
    loadbalance: true
………………………………………

Start and enable filebeat service using beneath systemctl commands,

[root@linuxtechi ~]# systemctl start filebeat
[root@linuxtechi ~]# systemctl enable  filebeat

Now go to Kibana GUI, verify whether new indices are visible or not,

Choose Management option from Left side bar and then click on Index Management under Elasticsearch,

As we can see above, indices are visible now, let’s create index pattern,

Click on “Index Patterns” from Kibana Section, it will prompt us to create a new pattern, click on “Create Index Pattern” and specify the pattern name as “filebeat”

Click on Next Step

Choose “Timestamp” as time filter for index pattern and then click on “Create index pattern”

Now Click on Discover to see real time filebeat index pattern,

This confirms that Filebeat agent has been configured successfully and we are able to see real time logs on Kibana dashboard.

That’s all from this article, please don’t hesitate to share your feedback and comments in case these steps help you to setup multi node Elastic Stack Cluster on RHEL 8 / CentOS 8 system.

---

via: https://www.linuxtechi.com/setup-multinode-elastic-stack-cluster-rhel8-centos8/

作者：Pradeep Kumar 选题：lujun9972 译者：heguangzhi 校对：校对者ID

本文由 LCTT 原创编译，Linux中国 荣誉推出