mirror of
https://github.com/LCTT/TranslateProject.git
synced 2025-01-19 22:51:41 +08:00
226 lines
9.9 KiB
Markdown
226 lines
9.9 KiB
Markdown
Smartctl – Monitoring & Analysis tool for Hard drive
|
||
================================================================================
|
||
**Smartctl** (Self-Monitoring, Analysis and Reporting Technology) is a command line utility or a tool in UNIX like operating system that perform SMART tasks such as printing the SMART **self-test** and **error logs**, enabling and disabling SMART **automatic testing**, and initiating device self-tests.
|
||
|
||
Smartctl is useful on physical Linux servers where smart disks can be checked for errors and extract info regarding the disks that are used behind the **Hardware RAID**.
|
||
|
||
In this post we will discuss some practical examples of smartctl command, Use below steps to install smartctl , if it is not installed on your linux box.
|
||
|
||
### Installation of Smartcl in Ubuntu ###
|
||
|
||
$ sudo apt-get install smartmontools
|
||
|
||
### Installation of Smartcl in Redhat / CentOS ###
|
||
|
||
# yum install smartmontools
|
||
|
||
**Start the Smartctl Service**
|
||
|
||
**For Ubuntu**
|
||
|
||
$ sudo /etc/init.d/smartmontools start
|
||
|
||
**For CentOS & RHEL**
|
||
|
||
# service smartd start ; chkconfig smartd on
|
||
|
||
**Example:1 Check Whether Smart Capability is enabled or not for the disk**
|
||
|
||
root@linuxtechi:~# smartctl -i /dev/sdb
|
||
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
|
||
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
||
|
||
=== START OF INFORMATION SECTION ===
|
||
Model Family: Seagate Momentus 5400.6
|
||
Device Model: ST9320325AS
|
||
Serial Number: 5VD2V59T
|
||
LU WWN Device Id: 5 000c50 020a37ec4
|
||
Firmware Version: 0002BSM1
|
||
User Capacity: 320,072,933,376 bytes [320 GB]
|
||
Sector Size: 512 bytes logical/physical
|
||
Rotation Rate: 5400 rpm
|
||
Device is: In smartctl database [for details use: -P show]
|
||
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
||
SATA Version is: SATA 2.6, 1.5 Gb/s
|
||
Local Time is: Sun Nov 16 12:32:09 2014 IST
|
||
SMART support is: Available - device has SMART capability.
|
||
SMART support is: Enabled
|
||
|
||
Where ‘/dev/sdb’ is your hard disk. Last Two lines in above output shows that SMART capability is enable for the device.
|
||
|
||
**Example:2 Enable Smart Capability for the disk**
|
||
|
||
root@linuxtechi:~# smartctl -s on /dev/sdb
|
||
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
|
||
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
||
|
||
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
|
||
SMART Enabled.
|
||
|
||
**Example:3 Disable Smart Capability for the disk**
|
||
|
||
root@linuxtechi:~# smartctl -s off /dev/sdb
|
||
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
|
||
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
||
|
||
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
|
||
SMART Disabled. Use option -s with argument 'on' to enable it.
|
||
|
||
**Example:4 Display Detailed Smart info for the disk**
|
||
|
||
root@linuxtechi:~# smartctl -a /dev/sdb // For IDE drive
|
||
root@linuxtechi:~# smartctl -a -d ata /dev/sdb // For SATA drive
|
||
|
||
**Example:5 Display Overall health of the Disk**
|
||
|
||
root@linuxtechi:~# smartctl -H /dev/sdb
|
||
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
|
||
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
||
|
||
=== START OF READ SMART DATA SECTION ===
|
||
SMART overall-health self-assessment test result: PASSED
|
||
Warning: This result is based on an Attribute check.
|
||
Please note the following marginal Attributes:
|
||
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
||
190 Airflow_Temperature_Cel 0x0022 067 045 045 Old_age Always In_the_past 33 (Min/Max 25/33)
|
||
|
||
**Example:6 Test Hard drive using long & short option.**
|
||
|
||
Long Test
|
||
|
||
root@linuxtechi:~# smartctl --test=long /dev/sdb
|
||
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
|
||
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
||
|
||
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
|
||
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
|
||
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
|
||
Testing has begun.
|
||
Please wait 102 minutes for test to complete.
|
||
Test will complete after Sun Nov 16 14:29:43 2014
|
||
|
||
Use smartctl -X to abort test.
|
||
|
||
OR We can redirect test output to a log file , as shown below
|
||
|
||
root@linuxtechi:~# smartctl --test=long /dev/sdb > /var/log/long.text
|
||
|
||
**Short Test**
|
||
|
||
root@linuxtechi:~# smartctl --test=short /dev/sdb
|
||
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
|
||
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
||
|
||
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
|
||
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
|
||
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
|
||
Testing has begun.
|
||
Please wait 1 minutes for test to complete.
|
||
Test will complete after Sun Nov 16 12:51:45 2014
|
||
|
||
Use smartctl -X to abort test.
|
||
|
||
OR
|
||
|
||
root@linuxtechi:~# smartctl --test=short /dev/sdb > /var/log/short.text
|
||
|
||
**Note** : Short test will take maximum 2 minutes whereas in long test there is no time restriction because it read & verify every segment of the entire disk.
|
||
|
||
**Example:7 To View Drive’s Self Test result **
|
||
|
||
root@linuxtechi:~# smartctl -l selftest /dev/sdb
|
||
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
|
||
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
||
|
||
=== START OF READ SMART DATA SECTION ===
|
||
SMART Self-test log structure revision number 1
|
||
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
||
# 1 Short offline Completed: read failure 90% 492 210841222
|
||
# 2 Extended offline Completed: read failure 90% 492 210841222
|
||
|
||
**Example:8 Calculate Estimate time to perform test**
|
||
|
||
root@linuxtechi:~# smartctl -c /dev/sdb
|
||
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
|
||
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
||
|
||
=== START OF READ SMART DATA SECTION ===
|
||
General SMART Values:
|
||
Offline data collection status: (0x00) Offline data collection activity
|
||
was never started.
|
||
Auto Offline Data Collection: Disabled.
|
||
Self-test execution status: ( 121) The previous self-test completed having
|
||
the read element of the test failed.
|
||
Total time to complete Offline
|
||
data collection: ( 0) seconds.
|
||
Offline data collection
|
||
capabilities: (0x73) SMART execute Offline immediate.
|
||
Auto Offline data collection on/off support.
|
||
Suspend Offline collection upon new
|
||
command.
|
||
No Offline surface scan supported.
|
||
Self-test supported.
|
||
Conveyance Self-test supported.
|
||
Selective Self-test supported.
|
||
SMART capabilities: (0x0003) Saves SMART data before entering
|
||
power-saving mode.
|
||
Supports SMART auto save timer.
|
||
Error logging capability: (0x01) Error logging supported.
|
||
General Purpose Logging supported.
|
||
Short self-test routine
|
||
recommended polling time: ( 1) minutes.
|
||
Extended self-test routine
|
||
recommended polling time: ( 102) minutes.
|
||
Conveyance self-test routine
|
||
recommended polling time: ( 2) minutes.
|
||
SCT capabilities: (0x103b) SCT Status supported.
|
||
SCT Error Recovery Control supported.
|
||
SCT Feature Control supported.
|
||
SCT Data Table supported.
|
||
|
||
**Example:9 Display Error logs of the disk **
|
||
|
||
root@linuxtechi:~# smartctl -l error /dev/sdb
|
||
|
||
Sample Output
|
||
|
||
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
|
||
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
||
|
||
=== START OF READ SMART DATA SECTION ===
|
||
SMART Error Log Version: 1
|
||
ATA Error Count: 5
|
||
CR = Command Register [HEX]
|
||
FR = Features Register [HEX]
|
||
SC = Sector Count Register [HEX]
|
||
SN = Sector Number Register [HEX]
|
||
CL = Cylinder Low Register [HEX]
|
||
CH = Cylinder High Register [HEX]
|
||
DH = Device/Head Register [HEX]
|
||
DC = Device Command Register [HEX]
|
||
ER = Error register [HEX]
|
||
ST = Status register [HEX]
|
||
Powered_Up_Time is measured from power on, and printed as
|
||
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
||
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
||
|
||
Commands leading to the command that caused the error were:
|
||
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
||
-- -- -- -- -- -- -- -- ---------------- --------------------
|
||
25 da 08 e7 e5 a5 4c 00 00:30:44.515 READ DMA EXT
|
||
25 da 08 df e5 a5 4c 00 00:30:44.514 READ DMA EXT
|
||
25 da 80 5f e5 a5 4c 00 00:30:44.502 READ DMA EXT
|
||
25 da f0 5f e6 a5 4c 00 00:30:44.496 READ DMA EXT
|
||
25 da 10 4f e6 a5 4c 00 00:30:44.383 READ DMA EXT
|
||
|
||
--------------------------------------------------------------------------------
|
||
|
||
via: http://www.linuxtechi.com/smartctl-monitoring-analysis-tool-hard-drive/
|
||
|
||
作者：[Pradeep Kumar][a]
|
||
译者：[译者ID](https://github.com/译者ID)
|
||
校对：[校对者ID](https://github.com/校对者ID)
|
||
|
||
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创翻译，[Linux中国](http://linux.cn/) 荣誉推出
|
||
|
||
[a]:http://www.linuxtechi.com/author/pradeep/ |