8.2 KiB
Linux ntopng - Network Monitoring Tool Installation (Screenshots)
Nowdays computers are connected between each other. From the small area such as your home Local Area Network (LAN) until the the biggest one which we call - Internet. When you are managing a network computer, you are managing one of the most critical component. Since most of developed application is web based application, the network between critical.
There is why we need a network monitoring tool. One of the best network monitoring tool is called ntop. From Wikipedia “ntop is a network probe that shows network usage in a way similar to what top does for processes. In interactive mode, it displays the networkstatus on the user's terminal. In Web mode, it acts as a web server, creating a HTML dump of the network status. It supports a NetFlow/sFlowemitter/collector, a HTTP-based client interface for creating ntop-centric monitoring applications, and RRD for persistently storing traffic statistics”
Now after 15 years, you will find ntopng - the next generation ntop.
What is ntopng
Ntopng is a high-speed web-based traffic analysis and flow collection. Ntopng is based from ntop. It’s run on every Unix platform, MacOS X and Windows.
Features
From ntopng website, they said there are many features of it. Here’s some of the list :
- Sort network traffic according to many protocols
- Show network traffic and IPv4/v6 active hosts
- Store on disk persistent traffic statistics in RRD format Geolocate hosts
- Discover application protocols by leveraging on nDPI, ntop’s DPI framework
- Show IP traffic distribution among the various protocols
- Analyse IP traffic and sort it according to the source/destination
- Display IP Traffic Subnet matrix (who’s talking to who?)
- Report IP protocol usage sorted by protocol type
- Produce HTML5/AJAX network traffic statistics
Installation
Ntop is available in pre-compiled packages for CentOS dan Ubuntu 64-bit based. You may find the packages in their download page. For 32-bit operating system, you have to compile it from the source. This article is tested on CentOS 6.4 32-bit version. But it may works also in other version of CentOS / RedHat based Linux. Let’s start.
Prerequisites
Development Tools
You have to make sure that you have all development tools which is needed to compile ntopng. To install the development tools you can use yum command :
# yum groupinstall ‘Development Tools’
Install TCL
# yum install tcl
Install libpcap
# yum install libpcap libcap-devel
Install Redis
# wget http://redis.googlecode.com/files/redis-2.6.13.tar.gz
# tar zxfv redis-2.6.13.tar.gz
# cd redis-2.6.13
# make 32bit
# make test
# make install
Install ntopng
Method 1 :
# wget http://sourceforge.net/projects/ntop/files/ntopng/ntopng-1.1_6932.tgz/download
# tar zxfv ntopng-1.1_6932.tgz
# cd ntopng-1.1_6932
# ./configure
# make
# make install
Method 2 :
On my CentOS 6.4 , I got an error message when using Method 1. Here’s the error message :
./third-party/LuaJIT-2.0.2/src/libluajit.a : could not read symbols : File in wrong format
So I switch to install it using SVN. Internet connection is required for this installation method. Here’s the steps :
# svn co https://svn.ntop.org/svn/ntop/trunk/ntopng/
# ./autogen.sh
# ./configure
# make
# make install
Since ntopng is a web-based application, your system must have a working web-server installed
Create configuration files for ntopng
If everything is installed, then it’s time for us to running it. By default, redis and ntopng will installed in /usr/local/ folder if we don’t change the installation folder explicitly in ./configure step. Next we need to create configuration files for ntopng. In this article we use vi as text editor. You can use your favorite text editor to create ntopng configuration files.
# cd /usr/local/etc
# mkdir ntopng
# cd ntopng
# vi ntopng.start
Put these lines :
--local-network “10.0.2.0/24”
--interface 1
# vi ntopng.pid
Put this line :
-G=/var/run/ntopng.pid
Save those files and we can continue to the next step
Run ntopng
We assume that you have installed web server correctly, then the next step is to run redis server.
# /usr/local/bin/redis-server
Then run ntopng
# /usr/local/bin/ntopng
Testing ntopng
Now you can test your ntopng application by typing http://yourserver.name:3000 . You will see ntopng login page. For the first time, you can use user ‘admin’ and password ‘admin’.
The dashboard is quite simple. After you logged in, you will see an information about Top Flow Talkers.
If you click Flows menu on the right top, ntopng will show you more detail about Active Flows.
On Hosts menu, you can see all hosts which are connected to the flows
If you click Hosts > Interactions, ntop will show you a nice graphic about interaction which happen between them.
Dashboard menu consist of :
Top Hosts (Send+Receive)
Top Application Protocol
Interfaces menu will bring you more menus inside. Packets menu shows you size distribution of packets.
Protocols menus will give you information about how many protocols that have been used and its percentage.
You can also see the activity by using Historical Activity menu
Last but not least, you can also manage the user who can access ntopng via Settings menu on the top right area (the one that have a gear icon). Then click Manage Users.
Ntopng provide you with a wide range of timeframe, from every 5 minutes until 1 year. You just need to click the timeframe you want to show. The graphic itself is clickable. You can click it to zoom it.
Of course, ntopng is more than just pictures above. You can also integrates it with GeoLocation and GeoMap services. From ntopng website it self, there are a paid modul such as nprobe to enrich the information provided by ntopng. For more detail usage of ntopng, please visit ntopng website.
via: http://linoxide.com/monitoring-2/ntopng-network-monitoring-tool/
作者：Pungki Arianto 译者：译者ID 校对：校对者ID