mirror of
https://github.com/LCTT/TranslateProject.git
synced 2025-01-01 21:50:13 +08:00
43 lines
3.2 KiB
Markdown
43 lines
3.2 KiB
Markdown
translating---geekpi
|
||
|
||
WD My Passport Wireless Linux Hacks
|
||
============================================================
|
||
|
||
While WD My Passport Wireless is a rather useful device in its own right, the fact that it powered by a lightweight yet complete Linux distribution means that its capabilities can be extended even further. Deploy, for example, [rclone][3] on the device, and you can back up the photos and raw files stored on the disk to any supported cloud storage service.
|
||
|
||
Before you can do this, though, you need to connect the device to a Wi-Fi network and enable SSH (so that you can access the underlying Linux system via SSH). To connect the WD My Passport Wireless to you current Wi-Fi network, power the device and connect to the wireless hotspot it creates from your regular Linux machine. Open a browser, point it to _[http://mypassport.local][1]_, and log in to the device’s web interface. Switch to the Wi-Fi section, and connect to the existing your local Wi-Fi network. Switch then to the Admin section and enable SSH access.
|
||
|
||
|
||
|
||
On your Linux machine, open the terminal and connect to the device using the `ssh root@mypassport.local` command.
|
||
|
||
Deploying rclone then is a matter of running the following commands:
|
||
|
||
| 123456789 | `curl -O http:``//downloads``.rclone.org``/rclone-current-linux-arm``.zip``unzip rclone-current-linux-arm.zip``cd` `rclone-*-linux-arm``cp` `rclone` `/usr/sbin/``chown` `root:root` `/usr/sbin/rclone``chmod` `755` `/usr/sbin/rclone``mkdir` `-p` `/usr/local/share/man/man1``sudo` `cp` `rclone.1` `/usr/local/share/man/man1/``sudo` `mandb` |
|
||
|
||
Once you’ve done that, run the `rclone config` command. Since you are configuring rclone on a headless machine, follow the instructions on the [Remote Setup][4] page. You’ll find detailed information on configuring and using rclone in the [Linux Photography][5] book.
|
||
|
||
You can put the WD My Passport Wireless to other practical uses, too. Since the device comes with Python, you can run scripts and Python-based web applications on the device. For example, you can deploy the simple [What’s in My Bag][6] application to track your photographic gear.
|
||
|
||
| 12345 | `curl -LOk https:``//github``.com``/dmpop/wimb/archive/master``.zip``unzip master.zip``mv` `wimb-master/ wimb``cd` `wimb``curl -LOk https:``//github``.com``/bottlepy/bottle/raw/master/bottle``.py` |
|
||
|
||
Run `./wimb.py` to start the app and point the browser to _[http://mypassport:8080/wimb][2]_ to access and use the application.
|
||
|
||
--------------------------------------------------------------------------------
|
||
|
||
via: https://scribblesandsnaps.com/2017/02/10/wd-my-passport-wireless-linux-hacks/
|
||
|
||
作者：[Dmitri Popov ][a]
|
||
译者：[译者ID](https://github.com/译者ID)
|
||
校对：[校对者ID](https://github.com/校对者ID)
|
||
|
||
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出
|
||
|
||
[a]:https://scribblesandsnaps.com/author/dmpop/
|
||
[1]:http://mypassport.local/
|
||
[2]:http://mypassport:8080/wimb
|
||
[3]:http://rclone.org/
|
||
[4]:http://rclone.org/remote_setup/
|
||
[5]:https://gumroad.com/l/linux-photography
|
||
[6]:https://github.com/dmpop/wimb
|