TranslateProject/sources/tech/20221212.1 ⭐️⭐️ How to Install the Minimalist ArchBang Linux Distro.md

[#]: subject: "How to Install the Minimalist ArchBang Linux Distro"
[#]: via: "https://itsfoss.com/install-archbang/"
[#]: author: "Sreenath https://itsfoss.com/author/sreenath/"
[#]: collector: "lkxed"
[#]: translator: " "
[#]: reviewer: " "
[#]: publisher: " "
[#]: url: " "

How to Install the Minimalist ArchBang Linux Distro
======

ArchBang is a minimal and lightweight [Arch Linux based distribution][1]. It uses the i3 window manager. With its minimal nature, ArchBang can help you revive your old computer or low-end devices.

There are two ways to install Arch Bang:

- Using the guided installer script
- Following Arch wiki

No prizes for guessing that using the guided installer script will be easier to follow.

In this tutorial, I’ll show you the steps for installing ArchBang with its text-based installer script.

Please [check if your computer has UEFI or the legacy BIOS system][2]. Some steps are different for them.

I have performed the demo in a virtual machine. And hence the wifi configuration part is not there. Internet connection is not mandatory here; you can also install it offline. You can connect to wifi from within the system after successfully installing ArchBang.

Also, this method will remove any other operating system installed on your disk. Please be mindful of that.

### Download ArchBang Live ISO

To install ArchBang, you need the live ISO first.

You can go to their [official website and download the required ISO][3], as shown in the below screenshot.

![go to archbang iso images to download the iso file from sourceforge][4]

It brings you to their Sourceforge page. Download the ISO, which is approximately 1.2 GiB in size.

### Create the Live USB of ArchBang

Once downloaded, you should make a bootable USB of ArchBang. You can [use software like Balena Etcher][5] to create it. It’s quite simple to use.

Plug in your USB, browse to the downloaded ISO file and then hit the Flash button.

![etcher flash][6]

### Using text-based ArchBang installer

ArchBang live ISO will bring you to the default i3 desktop with conky running.

![archbang live iso home screen][7]

You have two methods to start the installation process:

- Press **Super + I** (as per desktop conky) to start installation directly.
- Press **Super + T** to enter the terminal and use the command: `sudo abinstall`

A terminal with several options will appear when you do the above step:

![archbang installer][8]

The above screenshot shows the main menu of ArchBang installer. You can select each section with the associated number.

When you complete each category of the above installer, it will return to this menu and you can select the next category by pressing the corresponding number and Enter key.

Also, the completed sections will be checked with an “x” mark.

#### Step 1: Select / Set Partition

On the new installer screen, enter “1” to start [partitioning the disk][9].

Inside this, select the **Default** option. The installer has several tools to partition the disk, like cfdisk, fdisk, parted, etc. I used fdisk to do the job.

##### Partitioning for Non-UEFI system

Once the tool is selected, it will ask to choose the storage device. In my case, it was `/dev/sda` . Select the appropriate choice in your context.

To start partitioning, enter “n” for a new partition. After that, select **Primary Partition.**

![creating partition for non uefi system][10]

For [non-UEFI systems][2], you can create one single root partition for all purposes. So, accept all the default values for “First Sector” and “Last Sector”. Then, press “w” to write the changes.

On the next screen, you have to choose your filesystem and swap method. In this tutorial, I am using the EXT4 file system and Swap to File as the swap method.

So set those according to the screenshot.

![format the disk and select ext4 partition][11]

##### Partitioning for UEFI system

For UEFI users, you need to have two partitions, one EFI, with a 550 MB space, and another main root partition with the rest of the space (Swap as a file setting).

Press n and select **Primary Partition.** Then select the Partition number as 1.

Accept the default value for “First sector”. Now enter “+550M” as the value for “Last Sector”.

Once again, press “n” and select **Primary Partition**. Accept the default value for the first and last sectors.

![create two partitions for efi system][12]

Press “t” to change the type and select the partition number “1” or `/dev/sda1`, whose type is to be changed from “Linux” to “EFI”.

Select the partition type as EFI, as shown below:

![change type of smaller partition to efi][13]

Press “w” to write the changes. Then it will ask for filesystem selection. Here, you need to select the larger partition as the root partition (/dev/sda2, that is option 2 in the below screenshot).

![select larger partition for root partition in efi system][14]

Select EXT4 filesystem. This will again ask for mounting EFI partition.

![select efi partition][15]

In this step, you need to select the EFI partition at `/dev/sda1` and choose the mount point as `/boot/efi` . This will ask for format. Give consent by pressing “y”.

Also, don’t forget to choose the swap to file option.

#### Step 2: Start ArchBang installation

This is pretty simple. Select the Install ArchBang option from the main menu by pressing the corresponding number (2 in this case). It will start the installation process.

![installing archbang progress bar][16]

You should wait for some time to complete the installation.

#### Step 3: Set Hostname

Once installation is completed, Select the 3rd option on the main menu, which is for setting the hostname. You need to enter a hostname.

![provide hostname and press enter][17]

#### Step 4: Set Location

Location/Time Zone is typically mentioned in Zone/City format. I used Asia/Kolkata as the time zone.

The installer provides the list of available zones and cities; you need to enter the number corresponding to your choice.

![set time zone info][18]

Also, set your location the same way.

#### Step 5: Set Hardware Clock

You have two options; Set Hardware Clock to UTC or Local Time.

![set hardware clock time][19]

There are two time standards:** localtime** and Coordinated Universal Time (UTC). The localtime standard depends on the current time zone, while UTC is the global time standard and is independent of time zone values.

Enter your choice and press Enter key.

#### Step 6: Set Locale

Usually, you set the locale to en_US, if you are unsure what to do. That should be fine for most English-speaking users.

If you want to use the operating system in some other language like French, Spanish, Dutch etc, you can choose the appropriate locale from the list.

![set locale][20]

#### Step 7: Desktop Keyboard Layout

Similarly, most users should be fine with US keyboard. If you have some other keyboard (like French, or Italian), enter the appropriate choice from the available ones.

![set desktop keyboard layout][21]

#### Step 8: Configure Bootloader

In ArchBang, you get GRUB2, Syslinux, or Systemd for the bootloader. To make it simple, I am selecting GRUB2 from the choice.

![select grub2 as bootloader][22]

Now, it will ask you to specify the method to install GRUB. Select **Automatic** and press enter.

![select automatic grub][23]

#### Step 9: Set Root Password

Now, you should enter the root password. Select “Root Password” from the main menu.

![enter and confirm root password][24]

Here, enter and confirm the root password.

#### Step 10: Create a New User

Using a system with only a Root User is not secure. So, you should create a new user. In this installer, select the 10th option. Here, you should type a user name, password and confirm the password.

![create user and password][25]

Once done, press Enter to go to the main menu.

#### Step 11: Finish configuration

At this stage, you have reviewed all the configurations needed. You can now make it to effect by entering the letter “d” as shown in the screenshot below:

![enter d option to finish the installation][26]

This will ask permission to reboot your system.

![press y to reboot your system to new archbang][27]

Entering “y” will reboot your system to the newly installed ArchBang system.

### Post Installation Tweaks

Once rebooted, you will land in the same console. Probably there is no [display manager][28] installed. Here you should enter the username and password and press enter.

![login to archbang through tty][29]

This will bring you to the i3WM.

![installed archbang with i3wm][30]

Once installed, you need to do a couple of update tasks. **Connect to the internet first**.

Firstly, you need to update the Pacman keys and archlinux-keyring.

To do the same, open a terminal by pressing **Super + T** and run the following commands one by one:

```
sudo pacman-key –init
sudo pacman-key –populate
sudo pacman -Syyu archlinux-keyring
```

This will update system packages and keyrings. Reboot your system.

Now, you should install a display manager. I prefer LightDM display manager. So open a terminal and enter the following command to install it:

```
sudo pacman -S lightdm lightdm-gtk-greeter
```

Once installed, use the following command to start the Lightdm service:

```
sudo systemctl enable lightdm.service
```

You will get a good and minimal login screen from the next reboot.

![lightdm login screen in archbang][31]

You can now enjoy ArchBang Linux according to your liking.

### Wrapping Up

ArchBang brings a good Arch Linux experience coupled with a not-so-hard installer and i3WM as the window manager.

I understand that using a text-based installer like this one could be intimidating for some users. But then, it is [one of the joys of the Arch Linux][32] domain. It feels like a challenge and when you successfully install it, it gives you a sense of accomplishment.

I have tried to detail all the steps with the necessary explanation. Please let me know if you face any issues or if you have any questions.

--------------------------------------------------------------------------------

via: https://itsfoss.com/install-archbang/

作者：[Sreenath][a]
选题：[lkxed][b]
译者：[译者ID](https://github.com/译者ID)
校对：[校对者ID](https://github.com/校对者ID)

本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出

[a]: https://itsfoss.com/author/sreenath/
[b]: https://github.com/lkxed
[1]: https://itsfoss.com/arch-based-linux-distros/
[2]: https://itsfoss.com/check-uefi-or-bios/
[3]: https://sourceforge.net/projects/archbang/files/
[4]: https://itsfoss.com/wp-content/uploads/2022/12/go-to-archbang-iso-images-to-download-the-iso-file-from-sourceforge.png
[5]: https://itsfoss.com/install-etcher-linux/
[6]: https://itsfoss.com/wp-content/uploads/2022/06/etcher-flash.png
[7]: https://itsfoss.com/wp-content/uploads/2022/12/archbang-live-iso-home-screen.webp
[8]: https://itsfoss.com/wp-content/uploads/2022/12/archbang-installer.png
[9]: https://itsfoss.com/partition-managers-linux/
[10]: https://itsfoss.com/wp-content/uploads/2022/12/creating-partition-for-non-uefi-system.png
[11]: https://itsfoss.com/wp-content/uploads/2022/12/format-the-disk-and-select-ext4-partition.png
[12]: https://itsfoss.com/wp-content/uploads/2022/12/create-two-partitions-for-efi-system.png
[13]: https://itsfoss.com/wp-content/uploads/2022/12/change-type-of-smaller-partition-to_efi.png
[14]: https://itsfoss.com/wp-content/uploads/2022/12/select-larger-partition-for-root-partition-in-efi-system.png
[15]: https://itsfoss.com/wp-content/uploads/2022/12/select-efi-partition.png
[16]: https://itsfoss.com/wp-content/uploads/2022/12/installing-archbang-progress-bar.png
[17]: https://itsfoss.com/wp-content/uploads/2022/12/provide-hostname-and-press-enter.png
[18]: https://itsfoss.com/wp-content/uploads/2022/12/set-time-zone-info.png
[19]: https://itsfoss.com/wp-content/uploads/2022/12/set-hardware-clock-time.png
[20]: https://itsfoss.com/wp-content/uploads/2022/12/set-locale.png
[21]: https://itsfoss.com/wp-content/uploads/2022/12/set-desktop-keyboard-layout.png
[22]: https://itsfoss.com/wp-content/uploads/2022/12/select-grub2-as-bootloader.png
[23]: https://itsfoss.com/wp-content/uploads/2022/12/select-automatic-grub.png
[24]: https://itsfoss.com/wp-content/uploads/2022/12/enter-and-confirm-root-password.png
[25]: https://itsfoss.com/wp-content/uploads/2022/12/create-user-and-password.png
[26]: https://itsfoss.com/wp-content/uploads/2022/12/enter-d-option-to-finish-the-installation.png
[27]: https://itsfoss.com/wp-content/uploads/2022/12/press-y-to-reboot-your-system-to-new-archbang.png
[28]: https://itsfoss.com/display-manager/
[29]: https://itsfoss.com/wp-content/uploads/2022/12/login-to-archbang-through-tty.png
[30]: https://itsfoss.com/wp-content/uploads/2022/12/installed-archbang-with-i3wm.png
[31]: https://itsfoss.com/wp-content/uploads/2022/12/lightdm-login-screen-in-archbang.png
[32]: https://itsfoss.com/why-arch-linux/