TranslateProject/published/201408/20140812 'Ifconfig' Command Not Found In CentOS 7 Minimal Installation--A Quick Tip To Fix It.md
2014-09-02 20:57:38 +08:00

125 lines
5.3 KiB
Markdown
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

CentOS 7最小化安装后找不到ifconfig命令——修复小提示
================================================================================
![](http://180016988.r.cdn77.net/wp-content/uploads/2014/08/centos7-790x493.jpg)
就像我们所知道的,“**ifconfig**”命令用于配置GNU/Linux系统的网络接口。它显示网络接口卡的详细信息包括IP地址MAC地址以及网络接口卡状态之类。但是该命令已经过时了而且在最小化版本的RHEL 7以及它的克隆版本CentOS 7Oracle Linux 7和Scientific Linux 7中也找不到该命令。
### 在CentOS最小化服务器版本中如何查找网卡IP和其它详细信息 ###
CentOS 7最小化系统使用“**ip addr**”和“**ip link**”命令来查找网卡详情。要知道统计数据,可以使用“**ip -s link**”。
要查看网卡细节,输入以下命令:
ip addr
输出样例:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/void
inet 127.0.0.1/32 scope host venet0
inet 192.168.1.101/32 brd 192.168.1.101 scope global venet0:0
要查看网络接口统计数据,输入命令:
ip link
输出样例:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT
link/void
或者
ip -s link
输出样例:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
RX: bytes packets errors dropped overrun mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT
link/void
RX: bytes packets errors dropped overrun mcast
8515667 6667 0 0 0 0
TX: bytes packets errors dropped carrier collsns
300403 4249 0 0 0 0
### 在CentOS 7最小化服务器版本中如何启用并使用“ifconfig”命令 ###
如果你不知道在哪里可以找到ifconfig命令请按照以下简单的步骤来找到它。首先让我们找出哪个包提供了ifconfig命令。要完成这项任务输入以下命令
yum provides ifconfig
输出样例:
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: centos.aol.in
* extras: centos.aol.in
* updates: centos.aol.in
net-tools-2.0-0.17.20131004git.el7.x86_64 : Basic networking tools
Repo : @base
Matched from:
Filename : /usr/sbin/ifconfig
或者你也可以使用以下命令。
yum whatprovides ifconfig
这里“provides”或者“whatprovides”开关用于找出某个包提供了某些功能或文件。
就像你在上面的输出中所看到的,**net-tools**包提供了ifconfig命令。因此让我们安装net-tools包来使用ifconfig命令。
yum install net-tools
现在,你就可以像以往一样使用**ifconfig**命令了。
ifconfig -a
输出样例:
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
venet0: flags=211<UP,BROADCAST,POINTOPOINT,RUNNING,NOARP> mtu 1500
inet 127.0.0.1 netmask 255.255.255.255 broadcast 0.0.0.0 destination 127.0.0.1
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 0 (UNSPEC)
RX packets 7073 bytes 8549159 (8.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4611 bytes 359201 (350.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
venet0:0: flags=211<UP,BROADCAST,POINTOPOINT,RUNNING,NOARP> mtu 1500
inet 192.168.1.101 netmask 255.255.255.255 broadcast 192.168.1.101 destination 192.168.1.101
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 0 (UNSPEC)
尽情享受吧!
--------------------------------------------------------------------------------
via: http://www.unixmen.com/ifconfig-command-found-centos-7-minimal-installation-quick-tip-fix/
作者:[Senthilkumar][a]
译者:[GOLinux](https://github.com/GOLinux)
校对:[Caroline](https://github.com/carolinewuyan)
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创翻译,[Linux中国](http://linux.cn/) 荣誉推出
[a]:http://www.unixmen.com/author/sk/