[#]: collector: (lujun9972) [#]: translator: ( ) [#]: reviewer: ( ) [#]: publisher: ( ) [#]: url: ( ) [#]: subject: (Level up your shell history with Loki and fzf) [#]: via: (https://opensource.com/article/20/10/shell-history-loki-fzf) [#]: author: (Ed Welch https://opensource.com/users/ewelch) Level up your shell history with Loki and fzf ====== Loki expands the model Prometheus uses for metrics for monitoring and log aggregation. ![Gears above purple clouds][1] [Loki][2] is an Apache 2.0-licensed open source log-aggregation framework designed by Grafana Labs and built with tremendous support from a growing community. It is also the project I work on every day. In this article, rather than just talking about how Loki works, I will provide a hands-on introduction to solving real problems with it. ### The problem: a durable centralized shell history I love my shell history and have always been a fanatical CTRL+R user. About a year ago, my terminal life changed forever when my peer Dieter Plaetinck introduced me to the command-line fuzzy finder **[fzf][3]**. Suddenly, searching through commands went from this: ![Before Loki and fzf][4] (Ed Welch, [CC BY-SA 4.0][5]) To this: ![After Loki and fzf][6] (Ed Welch, [CC BY-SA 4.0][5]) While fzf significantly improved my quality of life, there were still some pieces missing around my shell history: * Losing shell history when terminals close abruptly, computers crash, computers die, whole disk encryption keys are forgotten * Having access to my shell history _from_ all my computers _on_ all my computers I think of my shell history as documentation: it's an important story I don't want to lose. Combining Loki with my shell history helps solve these problems and more. ### About Loki Loki takes the intuitive label model that the open source [Prometheus][7] project uses for metrics and expands it into the world of log aggregation. This enables developers and operators to seamlessly pivot between their metrics and logs using the same set of labels. Even if you're not using Prometheus, there are still plenty of reasons Loki might be a good fit for your log-storage needs: * **Low overhead:** Loki does not do full-text log indexing; it only creates an index of the labels you put on your logs. Keeping a small index substantially reduces Loki's operating requirements. I'm running my loki-shell project, which uses Loki to store shell history, on a [Raspberry Pi][8] using just a little over 50MB of memory. * **Low cost:** The log content is compressed and stored in object stores like Amazon S3, Google Cloud Storage, Azure Blob, or even directly on a filesystem. The goal is to use storage that is inexpensive and durable. * **Flexibility:** Loki is available in a single binary that can be downloaded and run directly or as a Docker image to run in any container environment. A [Helm chart][9] is available to get started quickly in Kubernetes. If you demand a lot from your logging tools, take a look at the [production setup][10] running at Grafana Labs. It uses open source [Jsonnet][11] and [Tanka][12] to deploy the same Loki image as discrete building blocks to enable massive horizontal scaling, high availability, replication, separate scaling of read and write paths, highly parallelizable querying, and more. In summary, Loki's approach is to keep a small index of metadata about your logs (labels) and store the unindexed and compressed log content in inexpensive object stores to make operating easier and cheaper. The application is built to run as a single process and easily evolve into a highly available distributed system. You can obtain high query performance on larger logging workloads through parallelization and sharding of queries—a bit like MapReduce for your logs. In addition, this functionality is available for anyone to use for free. As with its [Grafana][13] open observability platform, Grafana Labs is committed to making Loki a fully featured, fully open log-aggregation software anyone can use. ### Get started I'm running Loki on a Raspberry Pi on my home network and storing my shell history offsite in an S3 bucket. When I hit CTRL+R, Loki's [LogCLI][14] command-line interface makes several batching requests that are streamed into fzf. Here is an example—the top part shows the Loki server logs on the Pi. ![Logs of the Loki server on Raspberry Pi][15] (Ed Welch, [CC BY-SA 4.0][5]) Ready to give it a try? The following guide will help you set up and run Loki to be integrated with your shell history. Since this tutorial aims to keep things simple, this setup will run Loki locally on your computer and store all the files on the filesystem. You can find all of this, plus information about how to set up a more elaborate installation, in the [loki-shell GitHub repository][16]. Note that this tutorial will not change any existing behaviors around your history, so _your existing shell history command and history settings will be untouched._ Instead, this duplicates the command history to Loki with `$PROMPT_COMMAND` in Bash and `precmd` in Zsh. On the CTRL+R side of things, it overloads the function that fzf uses to access the CTRL+R command. Trying this is safe, and if you decide you don't like it, just follow the [uninstall steps][17] in the GitHub repo to remove all traces. Your shell history will be untouched. #### Step 1: Install fzf There are several ways to install fzf, but I prefer [the Git method][18]: ``` git clone --depth 1 ~/.fzf ~/.fzf/install ``` Say yes to all the question prompts. If you already have fzf installed, make sure you have the key bindings enabled (i.e., make sure when you type CTRL+R, fzf pops up). You can rerun the fzf installation to enable key bindings if necessary. #### Step 2: Install loki-shell Like fzf, loki-shell also has a Git repo and install script: ``` git clone --depth 1 ~/.loki-shell ~/.loki-shell/install ``` First, the script creates the `~/.loki-shell` directory where all files will be kept (including Loki data). Next, it will download binaries for [Promtail][19], LogCLI, and Loki. Then it will ask: ``` Do you want to install Loki? ([y]/n) ``` If you already have a centralized Loki running for loki-shell, you could answer n; however, for this tutorial, answer y or press Enter. There are two options available for running Loki locally: as a Docker image or as a single binary (with support for adding a systemd service). I recommend using Docker if it's available, as I think it simplifies operations a bit, but both work just fine. ``` #### Running with Docker ``` To run Loki as a Docker image: [code] ``` [y] to run Loki in Docker, [n] to run Loki as a binary ([y]/n) y Error: No such object: loki-shell Error response from daemon: No such container: loki-shell Error: No such container: loki-shell 54843ff3392f198f5cac51a6a5071036f67842bbc23452de8c3efa392c0c2e1e ``` ``` If this is the first time you're running the installation, you can disregard the error messages. This script will stop and replace a running Loki container if the version does not match, which allows you to rerun this script to upgrade Loki. That's it! Loki is now running as a Docker container. Data from Loki will be stored in ~/.loki-shell/data. The image runs with --restart=unless-stopped, so it will restart at reboot but will stay stopped if you run docker stop loki-shell. (If you're using Docker, you can skip down to Shell integration.) ``` ##### Running as binary ``` There are many ways to run a binary on a Linux system. This script can install a systemd service. If you don't have systemd, you can still use the binary install: [code] ``` [y] to run Loki in Docker, [n] to run Loki as a binary ([y]/n) n Run Loki with systemd? ([y]/n) n This is as far as this script can take you You will need to setup an auto-start for Loki It can be run with this command: /home/username/.loki-shell/bin/loki -config.file=/home/username/.loki-shell/config/loki-binary-config.yaml ``` ``` The script will spit out the command you need to use to run Loki, and you will be on your own to set up an init script or another method of auto-starting it. You can run the command directly, if you want, and run Loki from your current shell. If you do have systemd, you have the option of letting the script install the systemd service or showing you the commands to run it yourself: [code] ``` Run Loki with systemd? ([y]/n) y Installing the systemd service requires root permissions. [y] to run these commands with sudo [n] to print out the commands and you can run them yourself. ([y]/n) n sudo cp /home/ed/.loki-shell/config/loki-shell.service /etc/systemd/system/loki-shell.service sudo systemctl daemon-reload sudo systemctl enable loki-shell sudo systemctl start loki-shell Copy these commands and run them when the script finishes. (press enter to continue) ``` ``` ``` ##### Shell integration ``` Regardless of how you installed Loki, you should now see a prompt: [code]Enter the URL for your Loki server or press enter for default (http://localhost:4100) ``` If you had set up a centralized Loki, you would enter that URL here. However, this demo just uses the default, so you can press Enter. A lot of text will spit out explaining all the entries added to your ~.bashrc or ~.zshrc (or both). That's it! [code] ``` Finished. Restart your shell or reload config file.    source ~/.bashrc  # bash    source ~/.zshrc   # zsh ``` ``` ``` #### Step 3: Try it out! ``` Start using your shell, and use CTRL+R to see your commands. Open multiple terminal windows, type a command in one and CTRL+R in another, and you'll see your commands available immediately. Also, notice that when you switch between terminals and enter commands, they are available immediately with CTRL+R, but the Up arrow's operation is not affected between terminals. (This may not be true if you have Oh My Zsh installed, as it automatically appends all commands to the history.) Use CTRL+R multiple times to toggle between sorting by time and by relevance. Note that this configuration will show only the current hosts' query history, even if you are sending shell data from multiple hosts to Loki. I think by default this makes the most sense. There is a lot you can tweak if you want this behavior to change; see the loki-shell repo to learn more. It also installed an alias called hist: [code]alias hist="$HOME/.loki-shell/bin/logcli --addr=$LOKI_URL" ``` LogCLI can be used to query and search your history directly in Loki, including allowing you to search other hosts. Check out the getting started guide for LogCLI to learn more about querying. Loki's log query language (LogQL) provides metric queries that allow you to do some interesting things; for example, I can see how many times I issued the kc command (my alias for kubectl) in the last 30 days: ``` ![Counting use of a command][20] (Ed Welch, [CC BY-SA 4.0][5]) ``` ``` ## Extra credit ``` Install Grafana and play around with your shell history: [code]docker run -d -p 3000:3000 --name=grafana grafana/grafana ``` Open a web browser at http://localhost:3000 and log in using the default admin/admin username and password. On the left, navigate to Configuration -> Datasources, click the Add Datasource button, and select Loki. For the URL, you should be able to use http://localhost:4100 (however, on my WSL2 machine, I had to use the computer's actual IP address). Click Save and Test. You should see Data source connected and labels found. Click on the Explore icon on the left, make sure the Loki data source is selected, and try out a query: [code]{job="shell"} ``` If you have more hosts sending shell commands, you can limit the results to a certain host using the hostname label: [code]{job="shell", hostname="myhost"}. ``` You can also look for specific commands with filter expressions: [code]{job="shell"} |= "docker" ``` Or you can start exploring the world of metrics from logs to see how often you are using your shell: [code]rate({job="shell"}[1m]) ``` ``` ![Counting use of the shell over previous 20 days][21] (Ed Welch, [CC BY-SA 4.0][5]) ``` Want to reconstruct a timeline from an incident? You can filter by a specific command and see when it ran. ``` ![Counting use of a command][22] (Ed Welch, [CC BY-SA 4.0][5]) ``` To see what else you can do and learn more about Loki's query language, check out the LogQL guide. ``` ### Final thoughts ``` For more ideas, troubleshooting, and updates, follow the GitHub repo. This is still a work in progress, so please report any issues there. To learn more about Loki, check out the documentation, blog posts, and GitHub repo, or try it in Grafana Cloud. ``` * * * ``` A special thanks to my colleague Jack Baldry for planting the seed for this idea. I had the Loki knowledge to make this happen, but if it weren't for his suggestion, I don't think I ever would have made it here. ``` -------------------------------------------------------------------------------- via: https://opensource.com/article/20/10/shell-history-loki-fzf 作者：[Ed Welch][a] 选题：[lujun9972][b] 译者：[译者ID](https://github.com/译者ID) 校对：[校对者ID](https://github.com/校对者ID) 本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出 [a]: https://opensource.com/users/ewelch [b]: https://github.com/lujun9972 [1]: https://opensource.com/sites/default/files/styles/image-full-size/public/lead-images/chaos_engineer_monster_scary_devops_gear_kubernetes.png?itok=GPYLvfVh (Gears above purple clouds) [2]: https://github.com/grafana/loki [3]: https://github.com/junegunn/fzf [4]: https://opensource.com/sites/default/files/uploads/before.gif (Before Loki and fzf) [5]: https://creativecommons.org/licenses/by-sa/4.0/ [6]: https://opensource.com/sites/default/files/uploads/with_fzf.gif (After Loki and fzf) [7]: https://prometheus.io/ [8]: https://www.raspberrypi.org/ [9]: https://helm.sh/docs/topics/charts/ [10]: https://grafana.com/docs/loki/latest/installation/tanka/ [11]: https://jsonnet.org [12]: https://tanka.dev/ [13]: https://grafana.com/ [14]: https://grafana.com/docs/loki/latest/getting-started/logcli/ [15]: https://opensource.com/sites/default/files/uploads/example_logcli.gif (Logs of the Loki server on Raspberry Pi) [16]: https://github.com/slim-bean/loki-shell [17]: https://github.com/slim-bean/loki-shell/blob/master/uninstall [18]: https://github.com/junegunn/fzf#using-git [19]: https://grafana.com/docs/loki/latest/clients/promtail/ [20]: https://opensource.com/sites/default/files/uploads/count_kc.png (Counting use of a command) [21]: https://opensource.com/sites/default/files/uploads/last_20.png (Counting use of the shell over previous 20 days) [22]: https://opensource.com/sites/default/files/uploads/command_hist.png (Counting use of a command)