[#]: collector: (lujun9972) [#]: translator: ( ) [#]: reviewer: ( ) [#]: publisher: ( ) [#]: url: ( ) [#]: subject: (Learn how to Record and Replay Linux Terminal Sessions Activity) [#]: via: (https://www.linuxtechi.com/record-replay-linux-terminal-sessions-activity/) [#]: author: (Pradeep Kumar https://www.linuxtechi.com/author/pradeep/) Learn how to Record and Replay Linux Terminal Sessions Activity ====== Generally, all Linux administrators use **history** command to track which commands were executed in previous sessions, but there is one limitation of history command is that it doesn’t store the command’s output. There can be some scenarios where we want to check commands output of previous session and want to compare it with current session. Apart from this, there are some situations where we are troubleshooting the issues on Linux production boxes and want to save all terminal session activities for future reference, so in such cases script command become handy. Script is a command line tool which is used to capture or record your Linux server terminal sessions activity and later the recorded session can be replayed using scriptreplay command. In this article we will demonstrate how to install script command line tool and how to record Linux server terminal session activity and then later we will see how the recorded session can be replayed using **scriptreplay** command. ### Installation of Script tool on RHEL 7/ CentOS 7 Script command is provided by the rpm package “**util-linux**”, in case it is not installed on your CentOS 7 / RHEL 7 system , run the following yum command, ``` [root@linuxtechi ~]# yum install util-linux -y ``` **On RHEL 8 / CentOS 8** Run the following dnf command to install script utility on RHEL 8 and CentOS 8 system, ``` [root@linuxtechi ~]# dnf install util-linux -y ``` **Installation of Script tool on Debian based systems (Ubuntu / Linux Mint)** Execute the beneath apt-get command to install script utility ``` root@linuxtechi ~]# apt-get install util-linux -y ``` ### How to Use script utility Use of script command is straight forward, type script command on terminal then hit enter, it will start capturing your current terminal session activities inside a file called “**typescript**” ``` [root@linuxtechi ~]# script Script started, file is typescript [root@linuxtechi ~]# ``` To stop recording the session activities, type exit command and hit enter. ``` [root@linuxtechi ~]# exit exit Script done, file is typescript [root@linuxtechi ~]# ``` Syntax of Script command: ``` ~ ] # script {options} {file_name} ``` Different options used in script command, ![options-script-command][1] Let’s start recording of your Linux terminal session by executing script command and then execute couple of command like ‘**w**’, ‘**route -n**’ , ‘[**df -h**][2]’ and ‘**free-h**’, example is shown below ![script-examples-linux-server][3] As we can see above, terminal session logs are saved in the file “typescript” Now view the contents of typescript file using [cat][4] / vi command, ``` [root@linuxtechi ~]# ls -l typescript -rw-r--r--. 1 root root 1861 Jun 21 00:50 typescript [root@linuxtechi ~]# ``` ![typescript-file-content-linux][5] Above confirms that whatever commands we execute on terminal that have been saved inside the file “typescript” ### Use Custom File name in script command Let’s assume we want to use our customize file name to script command, so specify the file name after script command, in the below example we are using a file name “session-log-(current-date-time).txt” ``` [root@linuxtechi ~]# script sessions-log-$(date +%d-%m-%Y-%T).txt Script started, file is sessions-log-21-06-2019-01:37:39.txt [root@linuxtechi ~]# ``` Now run the commands and then type exit, ``` [root@linuxtechi ~]# exit exit Script done, file is sessions-log-21-06-2019-01:37:39.txt [root@linuxtechi ~]# ``` ### Append the commands output to script file Let assume script command had already recorded the commands output to a file called session-log.txt file and now we want to append output of new sessions commands output to this file, then use “**-a**” command in script command ``` [root@linuxtechi ~]# script -a sessions-log.txt Script started, file is sessions-log.txt [root@linuxtechi ~]# xfs_info /dev/mapper/centos-root meta-data=/dev/mapper/centos-root isize=512 agcount=4, agsize=2746624 blks = sectsz=512 attr=2, projid32bit=1 = crc=1 finobt=0 spinodes=0 data = bsize=4096 blocks=10986496, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=1 log =internal bsize=4096 blocks=5364, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 [root@linuxtechi ~]# exit exit Script done, file is sessions-log.txt [root@linuxtechi ~]# ``` To view updated session’s logs, use “cat session-log.txt ” ### Capture commands output to script file without interactive shell Let’s assume we want to capture commands output to a script file, then use **-c** option, example is shown below, ``` [root@linuxtechi ~]# script -c "uptime && hostname && date" root-session.txt Script started, file is root-session.txt 01:57:40 up 2:30, 3 users, load average: 0.00, 0.01, 0.05 linuxtechi Fri Jun 21 01:57:40 EDT 2019 Script done, file is root-session.txt [root@linuxtechi ~]# ``` ### Run script command in quiet mode To run script command in quiet mode use **-q** option, this option will suppress the script started and script done message, example is shown below, ``` [root@linuxtechi ~]# script -c "uptime && date" -q root-session.txt 02:01:10 up 2:33, 3 users, load average: 0.00, 0.01, 0.05 Fri Jun 21 02:01:10 EDT 2019 [root@linuxtechi ~]# ``` Record Timing information to a file and capture commands output to a separate file, this can be achieved in script command by passing timing file (**–timing**) , example is shown below, Syntax: ~ ]# script -t <timing-file-name>  {file_name} ``` [root@linuxtechi ~]# script --timing=timing.txt session.log Script started, file is session.log [root@linuxtechi ~]# uptime 02:27:59 up 3:00, 3 users, load average: 0.00, 0.01, 0.05 [root@linuxtechi ~]# date Fri Jun 21 02:28:02 EDT 2019 [root@linuxtechi ~]# free -h total used free shared buff/cache available Mem: 3.9G 171M 2.0G 8.6M 1.7G 3.3G Swap: 3.9G 0B 3.9G [root@linuxtechi ~]# whoami root [root@linuxtechi ~]# exit exit Script done, file is session.log [root@linuxtechi ~]# [root@linuxtechi ~]# ls -l session.log timing.txt -rw-r--r--. 1 root root 673 Jun 21 02:28 session.log -rw-r--r--. 1 root root 414 Jun 21 02:28 timing.txt [root@linuxtechi ~]# ``` ### Replay recorded Linux terminal session activity Now replay the recorded terminal session activities using scriptreplay command, **Note:** Scriptreplay is also provided by rpm package “**util-linux**”. Scriptreplay command requires timing file to work. ``` [root@linuxtechi ~]# scriptreplay --timing=timing.txt session.log ``` Output of above command would be something like below, ### Record all User’s Linux terminal session activities There are some business critical Linux servers where we want keep track on all users activity, so this can be accomplished using script command, place the following content in /etc/profile file , ``` [root@linuxtechi ~]# vi /etc/profile …………………………………………………… if [ "x$SESSION_RECORD" = "x" ] then timestamp=$(date +%d-%m-%Y-%T) session_log=/var/log/session/session.$USER.$$.$timestamp SESSION_RECORD=started export SESSION_RECORD script -t -f -q 2>${session_log}.timing $session_log exit fi …………………………………………………… ``` Save & exit the file. Create the session directory under /var/log folder, ``` [root@linuxtechi ~]# mkdir /var/log/session ``` Assign the permissions to session folder, ``` [root@linuxtechi ~]# chmod 777 /var/log/session/ [root@linuxtechi ~]# ``` Now verify whether above code is working or not. Login to ordinary user to linux server, in my I am using pkumar user, ``` ~ ] # ssh root@linuxtechi root@linuxtechi's password: [root@linuxtechi ~]$ uptime 04:34:09 up 5:06, 3 users, load average: 0.00, 0.01, 0.05 [root@linuxtechi ~]$ date Fri Jun 21 04:34:11 EDT 2019 [root@linuxtechi ~]$ free -h total used free shared buff/cache available Mem: 3.9G 172M 2.0G 8.6M 1.7G 3.3G Swap: 3.9G 0B 3.9G [root@linuxtechi ~]$ id uid=1001(pkumar) gid=1002(pkumar) groups=1002(pkumar) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 [root@linuxtechi ~]$ whoami pkumar [root@linuxtechi ~]$ exit Login as root and view user’s linux terminal session activity [root@linuxtechi ~]# cd /var/log/session/ [root@linuxtechi session]# ls -l | grep pkumar -rw-rw-r--. 1 pkumar pkumar 870 Jun 21 04:34 session.pkumar.19785.21-06-2019-04:34:05 -rw-rw-r--. 1 pkumar pkumar 494 Jun 21 04:34 session.pkumar.19785.21-06-2019-04:34:05.timing [root@linuxtechi session]# ``` ![Session-output-file-linux][6] We can also use scriptreplay command to replay user’s terminal session activities, ``` [root@linuxtechi session]# scriptreplay --timing session.pkumar.19785.21-06-2019-04\:34\:05.timing session.pkumar.19785.21-06-2019-04\:34\:05 ``` That’s all from this tutorial, please do share your feedback and comments in the comments section below. -------------------------------------------------------------------------------- via: https://www.linuxtechi.com/record-replay-linux-terminal-sessions-activity/ 作者：[Pradeep Kumar][a] 选题：[lujun9972][b] 译者：[译者ID](https://github.com/译者ID) 校对：[校对者ID](https://github.com/校对者ID) 本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出 [a]: https://www.linuxtechi.com/author/pradeep/ [b]: https://github.com/lujun9972 [1]: https://www.linuxtechi.com/wp-content/uploads/2019/06/options-script-command.png [2]: https://www.linuxtechi.com/11-df-command-examples-in-linux/ [3]: https://www.linuxtechi.com/wp-content/uploads/2019/06/script-examples-linux-server-1024x736.jpg [4]: https://www.linuxtechi.com/cat-command-examples-for-beginners-in-linux/ [5]: https://www.linuxtechi.com/wp-content/uploads/2019/06/typescript-file-content-linux-1024x794.jpg [6]: https://www.linuxtechi.com/wp-content/uploads/2019/06/Session-output-file-linux-1024x353.jpg