Linux中显示系统中USB信息的lsusb命令
================================================================================
**通用串行总线**(**USB**)被设计成为连接计算机外设的标准,如键盘、鼠标、打印机、数码相机、便携式媒体播放器、磁盘和网络适配器等等 - 来源:[Wikipedia][1]

![lsusb 命令](http://linoxide.com/wp-content/uploads/2013/12/lsusb-linux-command.jpg)

它已经成为了一个工业标准,现在很难看到一个没有USB口的计算机了。USB闪存的使用使得它更加流行。在Linux上,我们可以使用**lsusb**来列出USB设备和它的属性。

### 什么是lsusb ###

在它的手册上,lsusb定义成:

> 显示系统中以及连接到系统的USB总线信息的工具。

如何运行lsusb? 要运行lsusb,你可以直接在控制台输入lsusb。

    $ lsusb

    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 003: ID 17ef:4811 Lenovo Integrated Webcam [R5U877]
    Bus 008 Device 002: ID 0a5c:217f Broadcom Corp. Bluetooth Controller

**lsusb**会显示驱动和内部连接到你系统的设备。

下面介绍如何理解输出。我抓取了上面输出的最后一行:

	Bus 008 Device 002 : ID 0a5c:217f Broadcom Corp. Bluetooth Controller

- **Bus 008** : 指明设备连接到哪(哪条总线)
- **Device 002** : 表明这是连接到总线上的第二台设备
- **ID** : 设备的ID
- **Broadcom Corp. Bluetooth Controller** :生产商名字和设备名

我们同样可以看到在我们的系统中同时使用了USB2.0 root hub驱动和USB 1.1 root hub驱动。

用[dmesg][2]命令同样可以看到。下面是一个例子。

    $ dmesg |grep -i usb

    [ 0.353138] usbcore: registered new interface driver usbfs
    [ 0.353150] usbcore: registered new interface driver hub
    [ 0.353182] usbcore: registered new device driver usb
    [ 0.730026] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
    [ 0.730116] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.748019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.748169] hub 1-0:1.0: USB hub found
    [ 0.748336] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.768019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.768147] hub 2-0:1.0: USB hub found
    [ 0.768236] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
    [ 0.768251] uhci_hcd: USB Universal Host Controller Interface driver 

### 如何列出USB详细信息 ###

使用**-v**选项来开启。下面是一个例子。

    $ lsusb -v

    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 1
    bAlternateSetting 5
    bNumEndpoints 2
    bInterfaceClass 224 Wireless
    bInterfaceSubClass 1 Radio Frequency
    bInterfaceProtocol 1 Bluetooth
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0×83 EP 3 IN
    bmAttributes 1
    Transfer Type Isochronous
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0×0040 1x 64 bytes
    bInterval 1
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0×03 EP 3 OUT
    bmAttributes 1
    Transfer Type Isochronous
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0×0040 1x 64 bytes
    bInterval 1

### 找出连接了多少USB设备 ###

使用下面的命令

    $ find /dev/bus

接着你会看到像下面的输出:

    /dev/bus
    /dev/bus/usb
    /dev/bus/usb/008
    /dev/bus/usb/008/002
    /dev/bus/usb/008/001
    /dev/bus/usb/007
    /dev/bus/usb/007/001
    /dev/bus/usb/006
    /dev/bus/usb/006/001
    /dev/bus/usb/005
    /dev/bus/usb/005/001
    /dev/bus/usb/004
    /dev/bus/usb/004/001
    /dev/bus/usb/003
    /dev/bus/usb/003/001
    /dev/bus/usb/002
    /dev/bus/usb/002/004
    /dev/bus/usb/002/003
    /dev/bus/usb/002/001
    /dev/bus/usb/001
    /dev/bus/usb/001/001

使用**lsusb** 命令 的**-D** 选项,你可以打印特定设备的详细信息。下面是一个博通蓝牙设备的示例。

    $ lsusb -D /dev/bus/usb/008/002

    Device: ID 0a5c:217f Broadcom Corp. Bluetooth Controller
    Couldn’t open device, some information will be missing
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 224 Wireless
    bDeviceSubClass 1 Radio Frequency
    bDeviceProtocol 1 Bluetooth
    bMaxPacketSize0 64
    idVendor 0x0a5c Broadcom Corp.
    idProduct 0x217f Bluetooth Controller
    bcdDevice 3.60
    iManufacturer 1
    iProduct 2
    iSerial 3
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 216
    bNumInterfaces 4
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 3
    bInterfaceClass 224 Wireless
    bInterfaceSubClass 1 Radio Frequency
    bInterfaceProtocol 1 Bluetooth
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0×81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0×0010 1x 16 bytes
    bInterval 1
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0×82 EP 2 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0×0040 1x 64 bytes
    bInterval 1
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0×02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0×0040 1x 64 bytes
    bInterval 1 

### 找出大容量存储设备 ###

既然 **lsusb -v**给我们很详细的信息,那么你或许会错过一些信息。我们可以使用grep命令指定特定的信息。

大容量存储设备会有一个供应商名和ID。我们可以用它作为一个起点。

    $ lsusb -v |grep -Ei ‘(idVendor|Mass\ Storage)’

    idVendor 0×1005 Apacer Technology, Inc.
    bInterfaceClass 8 Mass Storage

你可以看到,我们系统上有一个来自Apacer Technology, Inc的USB大容量存储设备。

### 以树层级结构输出USB设备 ###

使用 **-t**选项满足这个要求

    $ lsusb -t

    /: Bus 08.Port 1: Dev 1, Class=root\_hub, Driver=uhci_hcd/2p, 12M
    /: Bus 07.Port 1: Dev 1, Class=root\_hub, Driver=uhci_hcd/2p, 12M
    /: Bus 06.Port 1: Dev 1, Class=root\_hub, Driver=uhci_hcd/2p, 12M
    /: Bus 05.Port 1: Dev 1, Class=root\_hub, Driver=uhci_hcd/2p, 12M
    /: Bus 04.Port 1: Dev 1, Class=root\_hub, Driver=uhci_hcd/2p, 12M
    /: Bus 03.Port 1: Dev 1, Class=root\_hub, Driver=uhci_hcd/2p, 12M
    /: Bus 02.Port 1: Dev 1, Class=root\_hub, Driver=ehci_hcd/6p, 480M
    |__ Port 1: Dev 4, If 0, Class=stor., Driver=usb-storage, 480M
    |__ Port 6: Dev 3, If 0, Class=’bInterfaceClass 0x0e not yet handled’, Driver=uvcvideo, 480M
    |__ Port 6: Dev 3, If 1, Class=’bInterfaceClass 0x0e not yet handled’, Driver=uvcvideo, 480M
    /: Bus 01.Port 1: Dev 1, Class=root\_hub, Driver=ehci_hcd/6p, 480M

数字**12M和480M** 是**指USB类型的传输速率**。

- 12M 意味着 USB 1.0 / 1.1的速率是 12Mbit/s
- 480M 意味着 USB 2.0的速率是 480Mbit/s

如果你找到5.0G,那意味这你有USB 3.0类型接口。它有5.0Gbit/s的传输速率。Linux从**/var/lib/usbutils/usb.ids**识别USB设备的详细信息。或者你可以访问[Linux-USB.org][3]获取最新的USB ID列表。

这些就是lsusb命令的基础。你可以用lsusb命令对你的系统上的USB设备做一个诊断。一般来说,你可以通过lsusb的手册探索命令的更多详细细节。只要输入**man lsab**来打开它的手册。

--------------------------------------------------------------------------------

via: http://linoxide.com/linux-command/linux-lsusb-command-print-usb/

译者:[geekpi](https://github.com/geekpi) 校对:[Mr小眼儿](http://blog.csdn.net/tinyeyeser)

本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创翻译,[Linux中国](http://linux.cn/) 荣誉推出

[1]:http://en.wikipedia.org/wiki/USB
[2]:http://linoxide.com/linux-command/linux-dmesg-command/
[3]:http://www.linux-usb.org/usb.ids