[#]: collector: (lujun9972) [#]: translator: ( ) [#]: reviewer: ( ) [#]: publisher: ( ) [#]: url: ( ) [#]: subject: (Getting Started With Nano Text Editor [Beginner’s Guide]) [#]: via: (https://itsfoss.com/nano-editor-guide/) [#]: author: (Abhishek Prakash https://itsfoss.com/author/abhishek/) Getting Started With Nano Text Editor [Beginner’s Guide] ====== [Nano][1] is the default [terminal-based text editor][2] in Ubuntu and many other Linux distributions. Though it is less complicated to use than the likes of [Vim][3] and [Emacs][4], it doesn’t mean Nano cannot be overwhelming to use. In this beginner’s guide, I’ll show you how to use the Nano text editor. I am also going to include a downloadable PDF cheat sheet at the end of the article so that you can refer to it for practicing and mastering Nano editor commands. If you are just interested in a quick summary of Nano keyboard shortcuts, please expand the next section. Essential Nano keyboard shortcuts (click to expand) **Shortcut** | **Description** ---|--- nano filename | Open file for editing in Nano Arrow keys | Move cursor up, down, left and right Ctrl+A, Ctrl+E | Move cursor to start and end of the line Ctrl+Y/Ctrl+V | Move page up and down Ctrl+_ | Move cursor to a certain location Alt+A and then use arrow key | Set a marker and select text Alt+6 | Copy the selected text Ctrl+K | Cut the selected text Ctrl+U | Paste the selected text Ctrl+6 | Cancel the selection Ctrl+K | Cut/delete entire line Alt+U | Undo last action Alt+E | Redo last action Ctrl+W, Alt+W | Search for text, move to next match Ctrl+\ | Search and replace Ctrl+O | Save the modification Ctrl+X | Exit the editor ### How to use Nano text editor ![][5] I presume that you have Nano editor installed on your system already. If not, please your distribution’s package manager to install it. #### Getting familiar with the Nano editor interface If you’ve ever [used Vim][6] or Emacs, you’ll notice that using Nano is a lot simpler. You can start writing or editing text straightaway. Nano editor also shows important keyboard shortcuts you need to use for editing at the bottom of the editor. This way you won’t get stuck at [exiting the editor like Vim][7]. The wider your terminal window, the more shortcuts it shows. ![Nano Editor Interface][8] You should get familiar with the symbols in Nano. * The caret symbol (^) means Ctrl key * The M character mean the Alt key When it says “^X Exit”, it means to use Ctrl+X keys to exit the editor. When it says “M-U Undo”, it means use Alt+U key to undo your last action. #### Open or create a file for editing in Nano You can open a file for editing in Nano like this: ``` nano my_file ``` If the file doesn’t exist, it will still open the editor and when you exit, you’ll have the option for saving the text to my_file. You may also open a new file without any name (like new document) with Nano like this: ``` nano ``` #### Basic editing You can start writing or modifying the text straightaway in Nano. There are no special insert mode or anything of that sort. It is almost like using a regular text editor, at least for writing and editing. As soon as you modify anything in the file, you’ll notice that it reflects this information on the editor. ![][9] Nothing is saved immediately to the file automatically unless you explicitly do so. When you exit the editor using Ctrl+X keyboard shortcut, you’ll be asked whether you want to save your modified text to the file or not. #### Moving around in the editor Mouse click doesn’t work here. Use the arrow keys to move up and down, left and right. You can use the Home key or Ctrl+A to move to the beginning of a line and End key or Ctrl+E to move to the end of a line. Ctrl+Y/Page Up and Ctrl+V/Page Down keys can be used to scroll by pages. If you want to go a specific location like last line, first line, to a certain text, use Ctrl+_ key combination. This will show you some options you can use at the bottom of the editor. ![Jump to a specific line in Nano][10] #### Cut, copy and paste in Nano editor If you don’t want to spend too much time remembering the shortcuts, use mouse. Select a text with mouse and then use the right click menu to copy the text. You may also use the Ctrl+Shift+C [keyboard shortcut in Ubuntu][11] terminal. Similarly, you can use the right click and select paste from the menu or use the Ctrl+Shift+V key combination. **Nano specific shortcuts for copy and pasting** Nano also provides its own shortcuts for cutting and pasting text but that could become confusing for beginners. Move your cursor to the beginning of the text you want to copy. Press Alt+A to set a marker. Now use the arrow keys to highlight the selection. Once you have selected the desired text, you can Alt+6 key to copy the selected text or use Ctrl+K to cut the selected text. Use Ctrl+6 to cancel the selection. Once you have copied or cut the selected text, you can use Ctrl+U to paste it. ![][12] #### Delete text or lines in Nano There is no dedicated option for deletion in Nano. You may use the Backspace or Delete key to delete one character at a time. Press them repeatedly or hold them to delete multiple characters. You can also use the Ctrl+K keys that cuts the entire line. If you don’t paste it anywhere, it’s as good as deleting a line. If you want to delete multiple lines, you may use Ctrl+K on all of them one by one. Another option is to use the marker (Ctrl+a). Set the marker and move the arrow to select a portion of text. Use Ctrl+K to cut the text. No need to paste it and the selected text will be deleted (in a way). #### Undo or redo your last action Cut the wrong line? Pasted the wrong text selection? It’s easy to make such silly mistakes and it’s easy to correct those silly mistakes. You can undo and redo your last actions using: * Alt+U : Undo * Alt +E : Redo You can repeat these key combinations to undo or redo multiple times. #### Search and replace If you want to search for a certain text, use Ctrl+W and then enter the term you want to search and press enter. The cursor will move to the first match. To go to the next match, use Alt+W keys. ![][13] By default, the search is case-insensitive. You can also use regex for the search terms. If you want to replace the searched term, use Ctr+\ keys and then enter the search term and press enter key. Next it will ask for the term you want to replace the searched items with. ![][14] The cursor will move to the first match and Nano will ask for your conformation for replacing the matched text. Use Y or N to confirm or deny respectively. Using either of Y or N will move to the next match. You may also use A to replace all matches. ![][15] #### Save your file while editing (without exiting) In a graphical editor, you are probable used to of saving your changes from time to time. In Nano, you can use Ctrl+O to save your changes you made to the file. It also works with a new, unnamed file. ![][16] Nano actually shows this keyboard shortcut at the bottom but it’s not obvious. It says “^O Write Out” which actually means to use Ctrl+O (it is letter O, not number zero) to save your current work. Not everyone can figure that out. In a graphical text editor, you probably use Ctrl+S to save your changes. Old habits die hard but it could cause trouble. Out of habit, if you accidentally press Ctrl+S to save your file, you’ll notice that the terminal freezes and you can do nothing. If you accidentally press Ctrl+S press Ctrl+Q nothing can be more scary than a frozen terminal and losing the work. #### Save and exit Nano editor To exit the editor, press Ctrl+X keys. When you do that, it will give you the option to save the file, or discard the file or cancel the exit process. ![][17] If you want to save the modified file as a new file (save as function in usual editors), you can do that as well. When you press Ctrl+X to exit and then Y to save the changes, it gives the option to which file it should save the changes. You can change the file name at this point. You’ll need to have ‘write permission’ on the file you are editing if you want to save the modifications to the file. #### Forgot keyboard shortcut? Use help Like any other terminal based text editor, Nano relies heavily on keyboard shortcuts. Though it displays several useful shortcuts on the bottom of the editor, you cannot see all of them. It is not possible to remember all the shortcuts, specially in the beginning. What you can do is to use the Ctrl+G keys to bring up the detailed help menu. The help menu lists all the keyboard shortcuts. ![][18] #### Always look at the bottom of the Nano editor If you are using Nano, you’ll notice that it displays important information at the bottom. This includes the keyboard shortcuts that will be used in the scenario. It also shows the last action you performed. ![][19] If you get too comfortable with Nano, you can get more screen for editing the text by disabling the shortcuts displayed at the bottom. You can use Alt+X keys for that. I don’t recommend doing it, to be honest. Pressing Alt+X brings the shortcut display back. ### Download Nano cheatsheet [PDF] There are a lot more shortcuts and editing options in Nano. I am not going to overwhelm you by mentioning them all. Here’s a quick summary of the important Nano keyboard shortcuts you should rememeber. Download link is under the image. ![][20] [Download Nano Cheat Sheet (free PDF)][21] You can download the cheatsheet, print it and keep at your desk. It will help you in remembering and mastering the shortcuts. I hope you find this beginner’s guide to Nano text editor helpful. If you liked it, please share it on Reddit, [Hacker News][22] or in various [Linux forums][23] you frequently visit. I welcome your questions and suggestions. -------------------------------------------------------------------------------- via: https://itsfoss.com/nano-editor-guide/ 作者：[Abhishek Prakash][a] 选题：[lujun9972][b] 译者：[译者ID](https://github.com/译者ID) 校对：[校对者ID](https://github.com/校对者ID) 本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出 [a]: https://itsfoss.com/author/abhishek/ [b]: https://github.com/lujun9972 [1]: https://www.nano-editor.org/ [2]: https://itsfoss.com/command-line-text-editors-linux/ [3]: https://www.vim.org/ [4]: https://www.gnu.org/software/emacs/ [5]: https://i0.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-guide.png?ssl=1 [6]: https://itsfoss.com/pro-vim-tips/ [7]: https://itsfoss.com/how-to-exit-vim/ [8]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-interface.png?ssl=1 [9]: https://i0.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-modified-text.png?ssl=1 [10]: https://i0.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-jump-to-line.png?ssl=1 [11]: https://itsfoss.com/ubuntu-shortcuts/ [12]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-set-mark.png?ssl=1 [13]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-search-text.png?ssl=1 [14]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-search-replace.png?ssl=1 [15]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-search-replace-confirm.png?ssl=1 [16]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-save-while-writing.png?ssl=1 [17]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-save-and-exit.png?ssl=1 [18]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-help-menu.png?ssl=1 [19]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-editor-hints.png?ssl=1 [20]: https://i1.wp.com/itsfoss.com/wp-content/uploads/2020/05/nano-cheatsheet.png?ssl=1 [21]: https://itsfoss.com/wp-content/uploads/2020/05/Nano-Cheat-Sheet.pdf [22]: https://news.ycombinator.com/ [23]: https://itsfoss.community/