mirror of
https://github.com/LCTT/TranslateProject.git
synced 2024-12-26 21:30:55 +08:00
Merge pull request #13385 from lujun9972/add-MjAxOTA0MjMgRm91ciBNZXRob2RzIFRvIENoZWNrIFRoZSBEZWZhdWx0IEdhdGV3YXkgT3IgUm91dGVyIElQIEFkZHJlc3MgSW4gTGludXgubWQK
选题: 20190423 Four Methods To Check The Default Gateway Or Router IP A…
This commit is contained in:
Xingyu.Wang
GitHub
commit
dc24978be2
@ -0,0 +1,147 @@
|
||||
[#]: collector: (lujun9972)
|
||||
[#]: translator: ( )
|
||||
[#]: reviewer: ( )
|
||||
[#]: publisher: ( )
|
||||
[#]: url: ( )
|
||||
[#]: subject: (Four Methods To Check The Default Gateway Or Router IP Address In Linux?)
|
||||
[#]: via: (https://www.2daygeek.com/check-find-default-gateway-or-router-ip-address-in-linux/)
|
||||
[#]: author: (Magesh Maruthamuthu https://www.2daygeek.com/author/magesh/)
|
||||
|
||||
Four Methods To Check The Default Gateway Or Router IP Address In Linux?
|
||||
======
|
||||
|
||||
Your default gateway is the IP address of your router that you should aware of that.
|
||||
|
||||
Typically this is automatically detected by your operating system during installation, if not then you may need to change it.
|
||||
|
||||
If your system not able to ping self then probable it could be a gateway issue and you have to fix it.
|
||||
|
||||
This might happen if you have multiple network adapters or routers on the network.
|
||||
|
||||
A gateway is a router that acts as an access point to passes network data from one networks to another networks.
|
||||
|
||||
The below articles will help you to gather some other information which is similar to this topic.
|
||||
|
||||
* **[9 Methods To Check Your Public IP Address In Linux Command Line][1]**
|
||||
* **[How To Enable (UP) And Disable (DOWN) A Network Interface Port (NIC) In Linux?][2]**
|
||||
|
||||
|
||||
|
||||
This can be done using below Four commands.
|
||||
|
||||
* **`route Command:`** route command is used to show and manipulate the IP routing table.
|
||||
* **`ip Command:`** IP command is similar to ifconfig, which is very familiar for assigning Static IP Address, Route & Default Gateway, etc.,.
|
||||
* **`netstat Command:`** netstat (“network statistics”) is a command-line tool that displays network connections related information (both incoming and outgoing) such as routing tables, masquerade connections, multicast memberships and a number of network interface
|
||||
* **`routel Command:`** routel command is used to list routes with pretty output format.
|
||||
|
||||
|
||||
|
||||
### 1) How To Check The Default Gateway Or Router IP Address In Linux Using route Command?
|
||||
|
||||
route command is used to show and manipulate the IP routing table.
|
||||
|
||||
Its primary use is to set up static routes to specific hosts or networks via an interface once the interface was configured.
|
||||
|
||||
When the add or del options are used, route modifies the routing tables. Without these options, route displays the current contents of the routing tables.
|
||||
|
||||
```
|
||||
# route
|
||||
or
|
||||
# route -n
|
||||
|
||||
Kernel IP routing table
|
||||
Destination Gateway Genmask Flags Metric Ref Use Iface
|
||||
default www.routerlogin 0.0.0.0 UG 600 0 0 wlp8s0
|
||||
192.168.1.0 0.0.0.0 255.255.255.0 U 600 0 0 wlp8s0
|
||||
```
|
||||
|
||||
### 2) How To Check The Default Gateway Or Router IP Address In Linux Using ip Command?
|
||||
|
||||
**[IP command][3]** is similar to ifconfig, which is very familiar for assigning Static IP Address, Route & Default Gateway, etc.,.
|
||||
|
||||
ifconfig command was deprecated due to no maintenance since so many years, even though it is still available on most Linux distributions.
|
||||
|
||||
ifconfig command has been replaced by IP command which is very powerful and performing several network administration tasks with one command.
|
||||
|
||||
IP command utility bundled with iproute2 package. By default iproute2 utility pre-installed all the major Linux distribution.
|
||||
|
||||
If no, you can install it by issuing iproute2 on your terminal with help of package manager.
|
||||
|
||||
```
|
||||
# ip r
|
||||
or
|
||||
# ip route
|
||||
or
|
||||
# ip route show
|
||||
|
||||
default via 192.168.1.1 dev wlp8s0 proto dhcp metric 600
|
||||
192.168.1.0/24 dev wlp8s0 proto kernel scope link src 192.168.1.6 metric 600
|
||||
```
|
||||
|
||||
### 3) How To Check The Default Gateway Or Router IP Address In Linux Using netstat Command?
|
||||
|
||||
netstat stands for Network Statistics, is a command-line tool that displays network connections related information (both incoming and outgoing) such as routing tables, masquerade connections, multicast memberships and a number of network interface.
|
||||
|
||||
It lists out all the tcp, udp socket connections and the unix socket connections.
|
||||
|
||||
It is used for diagnosing network problems in the network and to determine the amount of traffic on the network as a performance measurement.
|
||||
|
||||
```
|
||||
# netstat -r
|
||||
|
||||
Kernel IP routing table
|
||||
Destination Gateway Genmask Flags MSS Window irtt Iface
|
||||
default www.routerlogin 0.0.0.0 UG 0 0 0 wlp8s0
|
||||
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlp8s0
|
||||
```
|
||||
|
||||
### 4) How To Check The Default Gateway Or Router IP Address In Linux Using routel Command?
|
||||
|
||||
It used to list routes with pretty output format. These programs are a set of helper scripts you can use instead of raw iproute2 commands.
|
||||
|
||||
The routel script will list routes in a format that some might consider easier to interpret then the ip route list equivalent.
|
||||
|
||||
The routef script does not take any arguments and will simply flush the routing table down the drain. Beware! This means deleting all routes which will make your network unusable!
|
||||
|
||||
```
|
||||
# routel
|
||||
target gateway source proto scope dev tbl
|
||||
default 192.168.1.1 dhcp wlp8s0
|
||||
192.168.1.0/ 24 192.168.1.6 kernel link wlp8s0
|
||||
127.0.0.0 broadcast 127.0.0.1 kernel link lo local
|
||||
127.0.0.0/ 8 local 127.0.0.1 kernel host lo local
|
||||
127.0.0.1 local 127.0.0.1 kernel host lo local
|
||||
127.255.255.255 broadcast 127.0.0.1 kernel link lo local
|
||||
192.168.1.0 broadcast 192.168.1.6 kernel link wlp8s0 local
|
||||
192.168.1.6 local 192.168.1.6 kernel host wlp8s0 local
|
||||
192.168.1.255 broadcast 192.168.1.6 kernel link wlp8s0 local
|
||||
::1 kernel lo
|
||||
fe80::/ 64 kernel wlp8s0
|
||||
::1 local kernel lo local
|
||||
fe80::ad00:2f7e:d882:5add local kernel wlp8s0 local
|
||||
ff00::/ 8 wlp8s0 local
|
||||
```
|
||||
|
||||
If you would like to print only default gateway then use the following format.
|
||||
|
||||
```
|
||||
# routel | grep default
|
||||
default 192.168.1.1 dhcp wlp8s0
|
||||
```
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
via: https://www.2daygeek.com/check-find-default-gateway-or-router-ip-address-in-linux/
|
||||
|
||||
作者：[Magesh Maruthamuthu][a]
|
||||
选题：[lujun9972][b]
|
||||
译者：[译者ID](https://github.com/译者ID)
|
||||
校对：[校对者ID](https://github.com/校对者ID)
|
||||
|
||||
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出
|
||||
|
||||
[a]: https://www.2daygeek.com/author/magesh/
|
||||
[b]: https://github.com/lujun9972
|
||||
[1]: https://www.2daygeek.com/check-find-server-public-ip-address-linux/
|
||||
[2]: https://www.2daygeek.com/enable-disable-up-down-nic-network-interface-port-linux-using-ifconfig-ifdown-ifup-ip-nmcli-nmtui/
|
||||
[3]: https://www.2daygeek.com/ip-command-configure-network-interface-usage-linux/
|
||||
Loading…
Reference in New Issue
Block a user