mirror of
https://github.com/LCTT/TranslateProject.git
synced 2024-12-26 21:30:55 +08:00
选题[tech]: 20201009 How to Remove Physical Volume from a Volume Group in LVM
sources/tech/20201009 How to Remove Physical Volume from a Volume Group in LVM.md
This commit is contained in:
DarkSun
parent
2ddabe7e48
commit
d97db398e9
@ -0,0 +1,185 @@
|
||||
[#]: collector: (lujun9972)
|
||||
[#]: translator: ( )
|
||||
[#]: reviewer: ( )
|
||||
[#]: publisher: ( )
|
||||
[#]: url: ( )
|
||||
[#]: subject: (How to Remove Physical Volume from a Volume Group in LVM)
|
||||
[#]: via: (https://www.2daygeek.com/linux-remove-delete-physical-volume-pv-from-volume-group-vg-in-lvm/)
|
||||
[#]: author: (Magesh Maruthamuthu https://www.2daygeek.com/author/magesh/)
|
||||
|
||||
How to Remove Physical Volume from a Volume Group in LVM
|
||||
======
|
||||
|
||||
If a device is no longer need for use by LVM, you can use the vgreduce command to remove physical volumes from a volume group.
|
||||
|
||||
The Vgreduce command shrinks the capacity of a volume group by removing a physical volume.
|
||||
|
||||
But make sure that the physical volume is not used by any logical volumes using the pvdisplay command.
|
||||
|
||||
If the physical volume is still being used, you must transfer the data to another physical volume using the pvmove command.
|
||||
|
||||
Once the data is moved, it can be removed from the volume group.
|
||||
|
||||
Finally use the pvremove command to remove the LVM label and LVM metadata on the empty physical volume.
|
||||
|
||||
* **Part-1: [How to Create/Configure LVM (Logical Volume Management) in Linux][1]**
|
||||
* **Part-2: [How to Extend/Increase LVM’s (Logical Volume Resize) in Linux][2]**
|
||||
* **Part-3: [How to Reduce/Shrink LVM’s (Logical Volume Resize) in Linux][3]**
|
||||
|
||||
|
||||
|
||||
![][4]
|
||||
|
||||
### 1) Moving Extents to Existing Physical Volumes
|
||||
|
||||
Use the pvs command to check if the desired physical volume (we plan to remove the **“/dev/sdb1”** disk in LVM) is used or not.
|
||||
|
||||
```
|
||||
# pvs -o+pv_used
|
||||
|
||||
PV VG Fmt Attr PSize PFree Used
|
||||
/dev/sda1 myvg lvm2 a- 75.00G 14.00G 61.00G
|
||||
/dev/sdb1 myvg lvm2 a- 50.00G 45.00G 5.00G
|
||||
/dev/sdc1 myvg lvm2 a- 17.15G 12.15G 5.00G
|
||||
```
|
||||
|
||||
If this is used, check to see if there are enough free extents on the other physics volumes in the volume group.
|
||||
|
||||
If so, you can run the pvmove command on the device you want to remove. Extents will be distributed to other devices.
|
||||
|
||||
```
|
||||
# pvmove /dev/sdb1
|
||||
|
||||
/dev/sdb1: Moved: 2.0%
|
||||
…
|
||||
/dev/sdb1: Moved: 79.2%
|
||||
…
|
||||
/dev/sdb1: Moved: 100.0%
|
||||
```
|
||||
|
||||
When the pvmove command is complete. Re-use the pvs command to check whether the physics volume is free or not.
|
||||
|
||||
```
|
||||
# pvs -o+pv_used
|
||||
|
||||
PV VG Fmt Attr PSize PFree Used
|
||||
/dev/sda1 myvg lvm2 a- 75.00G 9.00G 66.00G
|
||||
/dev/sdb1 myvg lvm2 a- 50.00G 50.00G 0
|
||||
/dev/sdc1 myvg lvm2 a- 17.15G 12.15G 5.00G
|
||||
```
|
||||
|
||||
If it’s free, use the vgreduce command to remove the physical volume /dev/sdb1 from the volume group.
|
||||
|
||||
```
|
||||
# vgreduce myvg /dev/sdb1
|
||||
Removed "/dev/sdb1" from volume group "myvg"
|
||||
```
|
||||
|
||||
Finally, run the pvremove command to remove the disk from the LVM configuration. Now, the disk is completely removed from the LVM and can be used for other purposes.
|
||||
|
||||
```
|
||||
# pvremove /dev/sdb1
|
||||
Labels on physical volume "/dev/sdb1" successfully wiped.
|
||||
```
|
||||
|
||||
### 2) Moving Extents to a New Disk
|
||||
|
||||
If you don’t have enough free extents on the other physics volumes in the volume group. Add new physical volume using the steps below.
|
||||
|
||||
Request new LUNs from the storage team. Once this is allocated, run the following commands to **[discover newly added LUNs or disks in Linux][5]**.
|
||||
|
||||
```
|
||||
# ls /sys/class/scsi_host
|
||||
host0
|
||||
```
|
||||
|
||||
```
|
||||
# echo "- - -" > /sys/class/scsi_host/host0/scan
|
||||
```
|
||||
|
||||
```
|
||||
# fdisk -l
|
||||
```
|
||||
|
||||
Once the disk is detected in the OS, use the pvcreate command to create the physical volume.
|
||||
|
||||
```
|
||||
# pvcreate /dev/sdd1
|
||||
Physical volume "/dev/sdd1" successfully created
|
||||
```
|
||||
|
||||
Use the following command to add new physical volume /dev/sdd1 to the existing volume group vg01.
|
||||
|
||||
```
|
||||
# vgextend vg01 /dev/sdd1
|
||||
Volume group "vg01" successfully extended
|
||||
```
|
||||
|
||||
Now, use the pvs command to see the new disk **“/dev/sdd1”** that you have added.
|
||||
|
||||
```
|
||||
# pvs -o+pv_used
|
||||
|
||||
PV VG Fmt Attr PSize PFree Used
|
||||
/dev/sda1 myvg lvm2 a- 75.00G 14.00G 61.00G
|
||||
/dev/sdb1 myvg lvm2 a- 50.00G 0 50.00G
|
||||
/dev/sdc1 myvg lvm2 a- 17.15G 12.15G 5.00G
|
||||
/dev/sdd1 myvg lvm2 a- 60.00G 60.00G 0
|
||||
```
|
||||
|
||||
Use the pvmove command to move the data from /dev/sdb1 to /dev/sdd1.
|
||||
|
||||
```
|
||||
# pvmove /dev/sdb1 /dev/sdd1
|
||||
|
||||
/dev/sdb1: Moved: 10.0%
|
||||
…
|
||||
/dev/sdb1: Moved: 79.7%
|
||||
…
|
||||
/dev/sdb1: Moved: 100.0%
|
||||
```
|
||||
|
||||
After the data is moved to the new disk. Re-use the pvs command to check whether the physics volume is free.
|
||||
|
||||
```
|
||||
# pvs -o+pv_used
|
||||
|
||||
PV VG Fmt Attr PSize PFree Used
|
||||
/dev/sda1 myvg lvm2 a- 75.00G 14.00G 61.00G
|
||||
/dev/sdb1 myvg lvm2 a- 50.00G 50.00G 0
|
||||
/dev/sdc1 myvg lvm2 a- 17.15G 12.15G 5.00G
|
||||
/dev/sdd1 myvg lvm2 a- 60.00G 10.00G 50.00G
|
||||
```
|
||||
|
||||
If it’s free, use the vgreduce command to remove the physical volume /dev/sdb1 from the volume group.
|
||||
|
||||
```
|
||||
# vgreduce myvg /dev/sdb1
|
||||
Removed "/dev/sdb1" from volume group "myvg"
|
||||
```
|
||||
|
||||
Finally, run the pvremove command to remove the disk from the LVM configuration. Now, the disk is completely removed from the LVM and can be used for other purposes.
|
||||
|
||||
```
|
||||
# pvremove /dev/sdb1
|
||||
Labels on physical volume "/dev/sdb1" successfully wiped.
|
||||
```
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
via: https://www.2daygeek.com/linux-remove-delete-physical-volume-pv-from-volume-group-vg-in-lvm/
|
||||
|
||||
作者：[Magesh Maruthamuthu][a]
|
||||
选题：[lujun9972][b]
|
||||
译者：[译者ID](https://github.com/译者ID)
|
||||
校对：[校对者ID](https://github.com/校对者ID)
|
||||
|
||||
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出
|
||||
|
||||
[a]: https://www.2daygeek.com/author/magesh/
|
||||
[b]: https://github.com/lujun9972
|
||||
[1]: https://www.2daygeek.com/create-lvm-storage-logical-volume-manager-in-linux/
|
||||
[2]: https://www.2daygeek.com/extend-increase-resize-lvm-logical-volume-in-linux/
|
||||
[3]: https://www.2daygeek.com/reduce-shrink-decrease-resize-lvm-logical-volume-in-linux/
|
||||
[4]: data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7
|
||||
[5]: https://www.2daygeek.com/scan-detect-luns-scsi-disks-on-redhat-centos-oracle-linux/
|
||||
Loading…
Reference in New Issue
Block a user