mirror of
https://github.com/LCTT/TranslateProject.git
synced 2025-02-03 23:40:14 +08:00
选题: 20190901 Different Ways to Configure Static IP Address in RHEL 8
sources/tech/20190901 Different Ways to Configure Static IP Address in RHEL 8.md
This commit is contained in:
DarkSun
parent
30d332bcb0
commit
cfa6c1357d
@ -0,0 +1,250 @@
|
||||
[#]: collector: (lujun9972)
|
||||
[#]: translator: ( )
|
||||
[#]: reviewer: ( )
|
||||
[#]: publisher: ( )
|
||||
[#]: url: ( )
|
||||
[#]: subject: (Different Ways to Configure Static IP Address in RHEL 8)
|
||||
[#]: via: (https://www.linuxtechi.com/configure-static-ip-address-rhel8/)
|
||||
[#]: author: (Pradeep Kumar https://www.linuxtechi.com/author/pradeep/)
|
||||
|
||||
Different Ways to Configure Static IP Address in RHEL 8
|
||||
======
|
||||
|
||||
While Working on **Linux Servers**, assigning Static IP address on NIC / Ethernet cards is one of the common tasks that every Linux engineer do. If one configures the **Static IP address** correctly on a Linux server then he/she can access it remotely over network. In this article we will demonstrate what are different ways to assign Static IP address on RHEL 8 Server’s NIC.
|
||||
|
||||
[![Configure-Static-IP-RHEL8][1]][2]
|
||||
|
||||
Following are the ways to configure Static IP on a NIC,
|
||||
|
||||
* nmcli (command line tool)
|
||||
* Network Scripts files(ifcfg-*)
|
||||
* nmtui (text based user interface)
|
||||
|
||||
|
||||
|
||||
### Configure Static IP Address using nmcli command line tool
|
||||
|
||||
Whenever we install RHEL 8 server then ‘**nmcli**’, a command line tool is installed automatically, nmcli is used by network manager and allows us to configure static ip address on Ethernet cards.
|
||||
|
||||
Run the below ip addr command to list Ethernet cards on your RHEL 8 server
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# ip addr
|
||||
```
|
||||
|
||||
![ip-addr-command-rhel8][1]
|
||||
|
||||
As we can see in above command output, we have two NICs enp0s3 & enp0s8. Currently ip address assigned to the NIC is via dhcp server.
|
||||
|
||||
Let’s assume we want to assign the static IP address on first NIC (enp0s3) with the following details,
|
||||
|
||||
* IP address = 192.168.1.4
|
||||
* Netmask = 255.255.255.0
|
||||
* Gateway= 192.168.1.1
|
||||
* DNS = 8.8.8.8
|
||||
|
||||
|
||||
|
||||
Run the following nmcli commands one after the another to configure static ip,
|
||||
|
||||
List currently active Ethernet cards using “**nmcli connection**” command,
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# nmcli connection
|
||||
NAME UUID TYPE DEVICE
|
||||
enp0s3 7c1b8444-cb65-440d-9bf6-ea0ad5e60bae ethernet enp0s3
|
||||
virbr0 3020c41f-6b21-4d80-a1a6-7c1bd5867e6c bridge virbr0
|
||||
[root@linuxtechi ~]#
|
||||
```
|
||||
|
||||
Use beneath nmcli command to assign static ip on enp0s3,
|
||||
|
||||
**Syntax:**
|
||||
|
||||
# nmcli connection modify <interface_name> ipv4.address <ip/prefix>
|
||||
|
||||
**Note:** In short form, we usually replace connection with ‘con’ keyword and modify with ‘mod’ keyword in nmcli command.
|
||||
|
||||
Assign ipv4 (192.168.1.4) to enp0s3 interface,
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# nmcli con mod enp0s3 ipv4.addresses 192.168.1.4/24
|
||||
[root@linuxtechi ~]#
|
||||
```
|
||||
|
||||
Set the gateway using below nmcli command,
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# nmcli con mod enp0s3 ipv4.gateway 192.168.1.1
|
||||
[root@linuxtechi ~]#
|
||||
```
|
||||
|
||||
Set the manual configuration (from dhcp to static),
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# nmcli con mod enp0s3 ipv4.method manual
|
||||
[root@linuxtechi ~]#
|
||||
```
|
||||
|
||||
Set DNS value as “8.8.8.8”,
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# nmcli con mod enp0s3 ipv4.dns "8.8.8.8"
|
||||
[root@linuxtechi ~]#
|
||||
```
|
||||
|
||||
To save the above changes and to reload the interface execute the beneath nmcli command,
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# nmcli con up enp0s3
|
||||
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/4)
|
||||
[root@linuxtechi ~]#
|
||||
```
|
||||
|
||||
Above command output confirms that interface enp0s3 has been configured successfully.Whatever the changes we have made using above nmcli commands, those changes is saved permanently under the file “etc/sysconfig/network-scripts/ifcfg-enp0s3”
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# cat /etc/sysconfig/network-scripts/ifcfg-enp0s3
|
||||
```
|
||||
|
||||
![ifcfg-enp0s3-file-rhel8][1]
|
||||
|
||||
To Confirm whether IP address has been to enp0s3 interface use the below ip command,
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]#ip addr show enp0s3
|
||||
```
|
||||
|
||||
### Configure Static IP Address manually using network-scripts (ifcfg-) files
|
||||
|
||||
We can configure the static ip address to an ethernet card using its network-script or ‘ifcfg-‘ files. Let’s assume we want to assign the static ip address on our second Ethernet card ‘enp0s8’.
|
||||
|
||||
* IP= 192.168.1.91
|
||||
* Netmask / Prefix = 24
|
||||
* Gateway=192.168.1.1
|
||||
* DNS1=4.2.2.2
|
||||
|
||||
|
||||
|
||||
Go to the directory “/etc/sysconfig/network-scripts” and look for the file ‘ifcfg- enp0s8’, if it does not exist then create it with following content,
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# cd /etc/sysconfig/network-scripts/
|
||||
[root@linuxtechi network-scripts]# vi ifcfg-enp0s8
|
||||
TYPE="Ethernet"
|
||||
DEVICE="enp0s8"
|
||||
BOOTPROTO="static"
|
||||
ONBOOT="yes"
|
||||
NAME="enp0s8"
|
||||
IPADDR="192.168.1.91"
|
||||
PREFIX="24"
|
||||
GATEWAY="192.168.1.1"
|
||||
DNS1="4.2.2.2"
|
||||
```
|
||||
|
||||
Save and exit the file and then restart network manager service to make above changes into effect,
|
||||
|
||||
```
|
||||
[root@linuxtechi network-scripts]# systemctl restart NetworkManager
|
||||
[root@linuxtechi network-scripts]#
|
||||
```
|
||||
|
||||
Now use below ip command to verify whether ip address is assigned to nic or not,
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# ip add show enp0s8
|
||||
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
|
||||
link/ether 08:00:27:7c:bb:cb brd ff:ff:ff:ff:ff:ff
|
||||
inet 192.168.1.91/24 brd 192.168.1.255 scope global noprefixroute enp0s8
|
||||
valid_lft forever preferred_lft forever
|
||||
inet6 fe80::a00:27ff:fe7c:bbcb/64 scope link
|
||||
valid_lft forever preferred_lft forever
|
||||
[root@linuxtechi ~]#
|
||||
```
|
||||
|
||||
Above output confirms that static ip address has been configured successfully on the NIC ‘enp0s8’
|
||||
|
||||
### Configure Static IP Address using ‘nmtui’ utility
|
||||
|
||||
nmtui is a text based user interface for controlling network manager, when we execute nmtui, it will open a text base user interface through which we can add, modify and delete connections. Apart from this nmtui can also be used to set hostname of your system.
|
||||
|
||||
Let’s assume we want to assign static ip address to interface enp0s3 with following details,
|
||||
|
||||
* IP address = 10.20.0.72
|
||||
* Prefix = 24
|
||||
* Gateway= 10.20.0.1
|
||||
* DNS1=4.2.2.2
|
||||
|
||||
|
||||
|
||||
Run nmtui and follow the screen instructions, example is show
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# nmtui
|
||||
```
|
||||
|
||||
[![nmtui-rhel8][1]][3]
|
||||
|
||||
Select the first option ‘**Edit a connection**‘ and then choose the interface as ‘enp0s3’
|
||||
|
||||
[![Choose-interface-nmtui-rhel8][1]][4]
|
||||
|
||||
Choose Edit and then specify the IP address, Prefix, Gateway and DNS Server ip,
|
||||
|
||||
[![set-ip-nmtui-rhel8][1]][5]
|
||||
|
||||
Choose OK and hit enter. In the next window Choose ‘**Activate a connection**’
|
||||
|
||||
[![Activate-option-nmtui-rhel8][1]][6]
|
||||
|
||||
Select **enp0s3**, Choose **Deactivate** & hit enter
|
||||
|
||||
[![Deactivate-interface-nmtui-rhel8][1]][7]
|
||||
|
||||
Now choose **Activate** & hit enter,
|
||||
|
||||
[![Activate-interface-nmtui-rhel8][1]][8]
|
||||
|
||||
Select Back and then select Quit,
|
||||
|
||||
[![Quit-Option-nmtui-rhel8][1]][9]
|
||||
|
||||
Use below IP command to verify whether ip address has been assigned to interface enp0s3
|
||||
|
||||
```
|
||||
[root@linuxtechi ~]# ip add show enp0s3
|
||||
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
|
||||
link/ether 08:00:27:53:39:4d brd ff:ff:ff:ff:ff:ff
|
||||
inet 10.20.0.72/24 brd 10.20.0.255 scope global noprefixroute enp0s3
|
||||
valid_lft forever preferred_lft forever
|
||||
inet6 fe80::421d:5abf:58bd:c47e/64 scope link noprefixroute
|
||||
valid_lft forever preferred_lft forever
|
||||
[root@linuxtechi ~]#
|
||||
```
|
||||
|
||||
Above output confirms that we have successfully assign the static IP address to interface enp0s3 using nmtui utility.
|
||||
|
||||
That’s all from this tutorial, we have covered three different ways to configure ipv4 address to an Ethernet card on RHEL 8 system. Please do not hesitate to share feedback and comments in comments section below.
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
via: https://www.linuxtechi.com/configure-static-ip-address-rhel8/
|
||||
|
||||
作者：[Pradeep Kumar][a]
|
||||
选题：[lujun9972][b]
|
||||
译者：[译者ID](https://github.com/译者ID)
|
||||
校对：[校对者ID](https://github.com/校对者ID)
|
||||
|
||||
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出
|
||||
|
||||
[a]: https://www.linuxtechi.com/author/pradeep/
|
||||
[b]: https://github.com/lujun9972
|
||||
[1]: data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7
|
||||
[2]: https://www.linuxtechi.com/wp-content/uploads/2019/09/Configure-Static-IP-RHEL8.jpg
|
||||
[3]: https://www.linuxtechi.com/wp-content/uploads/2019/09/nmtui-rhel8.jpg
|
||||
[4]: https://www.linuxtechi.com/wp-content/uploads/2019/09/Choose-interface-nmtui-rhel8.jpg
|
||||
[5]: https://www.linuxtechi.com/wp-content/uploads/2019/09/set-ip-nmtui-rhel8.jpg
|
||||
[6]: https://www.linuxtechi.com/wp-content/uploads/2019/09/Activate-option-nmtui-rhel8.jpg
|
||||
[7]: https://www.linuxtechi.com/wp-content/uploads/2019/09/Deactivate-interface-nmtui-rhel8.jpg
|
||||
[8]: https://www.linuxtechi.com/wp-content/uploads/2019/09/Activate-interface-nmtui-rhel8.jpg
|
||||
[9]: https://www.linuxtechi.com/wp-content/uploads/2019/09/Quit-Option-nmtui-rhel8.jpg
|
||||
Loading…
Reference in New Issue
Block a user