mirror of
https://github.com/LCTT/TranslateProject.git
synced 2024-12-26 21:30:55 +08:00
选题[tech]: 20210728 Create your own custom Raspberry Pi image
sources/tech/20210728 Create your own custom Raspberry Pi image.md
This commit is contained in:
DarkSun
parent
7f0b0d7783
commit
b12852a52c
@ -0,0 +1,289 @@
|
|||||||
|
[#]: subject: (Create your own custom Raspberry Pi image)
|
||||||
|
[#]: via: (https://opensource.com/article/21/7/custom-raspberry-pi-image)
|
||||||
|
[#]: author: (Stephan Avenwedde https://opensource.com/users/hansic99)
|
||||||
|
[#]: collector: (lujun9972)
|
||||||
|
[#]: translator: ( )
|
||||||
|
[#]: reviewer: ( )
|
||||||
|
[#]: publisher: ( )
|
||||||
|
[#]: url: ( )
|
||||||
|
|
||||||
|
Create your own custom Raspberry Pi image
|
||||||
|
======
|
||||||
|
Build a Raspberry Pi image from scratch or convert your running,
|
||||||
|
modified Raspberry Pi OS back to an image others can use.
|
||||||
|
![Vector, generic Raspberry Pi board][1]
|
||||||
|
|
||||||
|
When I recently read [Alan Formy-Duval's][2] article [_Manage your Raspberry Pi with Cockpit_][3], I thought it would be a good idea to have an image with Cockpit already preinstalled. Luckily there are at least two ways to accomplish this task:
|
||||||
|
|
||||||
|
* Adapt the sources of the Raspberry Pi OS image building toolchain [pi-gen][4] which enables you to build a Raspberry Pi image from scratch
|
||||||
|
* Convert your running, modified Raspberry Pi OS back to an image others can use
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
This article covers both methods. I'll highlight the pros and cons of each technique.
|
||||||
|
|
||||||
|
### Pi-gen
|
||||||
|
|
||||||
|
Let's begin with [pi-gen][4]. Before we start, there are a few prerequisites you'll need to consider.
|
||||||
|
|
||||||
|
#### Prerequisites
|
||||||
|
|
||||||
|
To successfully run the build process, it is recommended to use a 32bit version of Debian Buster or Ubuntu Xenial. It may work on other systems as well but to avoid unnecessary complications, I recommend to setup a virtual machine with one of the recommended systems. If you are not familiar with virtual machines, take a look at my article [Try Linux on any operating system with VirtualBox][5]. When you have everything up and running, also install the dependencies mentioned in the [repository description][6]. Also consider that you need internet access in the virtual machine and enough free disk space. I set up my virtual machine with a 40GB hard drive which seemed to be enough.
|
||||||
|
|
||||||
|
In order to follow the instructions in this article, make a clone of the [pi-gen][4] repository or fork it if you want to start developing you own image.
|
||||||
|
|
||||||
|
#### Repository Overview
|
||||||
|
|
||||||
|
The overall build process is separated into stages. Each stage is represented as an ordinary folder and represents a logical intermediate with regards to a full Raspberry Pi OS image.
|
||||||
|
|
||||||
|
* **Stage 0**: Bootstrap—Creates a usable filesystem
|
||||||
|
* **Stage 1**: Minimal system—Creates an absolute minimal system
|
||||||
|
* **Stage 2**: Lite system—Corresponds to Raspberry Pi OS Lite
|
||||||
|
* **Stage 3**: Desktop system—Installs X11, LXDE, web browsers, and so on
|
||||||
|
* **Stage 4**: Corresponds to an ordinary Raspberry Pi OS
|
||||||
|
* **Stage 5**: Corresponds to Raspberry Pi OS Full
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
The stages build upon each other: It is not possible to build a higher stage without building the lower stages. You can't leave out a stage in the middle either. For example, to build a Raspberry Pi OS Lite, you have to build stages 0, 1, and 2. To build a Raspberry Pi OS with a desktop, you have to build stages 0, 1, 2, 3, 4, and 5.
|
||||||
|
|
||||||
|
#### Build process
|
||||||
|
|
||||||
|
The build process is controlled by the `build.sh`, which can be found in the root repository. If you already know how to read and write bash scripts, it won't be a hurdle to understand the process defined there. If not, reading the `build.sh` and trying to understand what is going on is a really good practice. But even without bash scripting skills, you will be able to create your own image with Cockpit preinstalled.
|
||||||
|
|
||||||
|
In general, the build process consists of several nested for-loops.
|
||||||
|
|
||||||
|
* **stage-loop:** Loop through all stage directories in ascending order
|
||||||
|
* Skip further processing if a file named _SKIP_ is found
|
||||||
|
* Run the script `prerun.sh`
|
||||||
|
* **sub-loop:** Loop through each subdirectory in ascending order and process the following files if they are present:
|
||||||
|
* * `00-run-sh`: Arbitrary instructions to run in advance
|
||||||
|
* `00-run-chroot.sh`: Run this script in the chroot directory of the image
|
||||||
|
* `00-debconfs`: Variables for the` debconf-set-selection`
|
||||||
|
* `00-packages`: A list of packages to install
|
||||||
|
* `00-packages-nr`: Similar to the _00-packages_, except that this will cause the installation with --no-install-recommends -y parameter to _apt-get_
|
||||||
|
* `00-patches`: A directory containing patch files to be applied, using [quilt][7]
|
||||||
|
|
||||||
|
* Back in the stage-loop, if a file named `EXPORT_IMAGE` is found, generate an image for this stage
|
||||||
|
|
||||||
|
* If a file named `SKIP_IMAGE` is found, skip creating the image
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
The `build.sh `also requires a file named `config` containing some specification which is read on startup.
|
||||||
|
|
||||||
|
#### Hands-On
|
||||||
|
|
||||||
|
First, we will create a basic Raspberry Pi OS Lite image. The Raspberry Pi OS Lite image will act as a base for our custom image. Create an empty file named _config_ and add the following two lines:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
IMG_NAME='Cockpit'
|
||||||
|
ENABLE_SSH=1
|
||||||
|
```
|
||||||
|
|
||||||
|
Create an empty file named `SKIP` in the directories `stage3`, `stage4`, and `stage5`. `Stages 4` and `5` emit an image by default, therefore add an empty file named `SKIP_IMAGE` in `stage4` and `stage5`.
|
||||||
|
|
||||||
|
Now open a terminal and switch to the root user by typing `su`. Navigate to the root directory of the repository and start the build script by typing `./build.sh`.
|
||||||
|
|
||||||
|
The build process will take some time.
|
||||||
|
|
||||||
|
After the build process has finished, you will find two more directories in the root of the repository: `work `and `deploy`. The `work` folder contains some intermediate output. In the `deploy` folder you should find the zipped image file, ready for deployment.
|
||||||
|
|
||||||
|
If the overall build process was successful, we now can modify the process so that it installs Cockpit additionally.
|
||||||
|
|
||||||
|
#### Extending the build process
|
||||||
|
|
||||||
|
The Raspberry Pi OS Lite image acts as the base for our Cockpit installation. As the Raspberry Pi OS Lite image is complete with `stage2`, we will create our own `stage3` which will handle the Cockpit installation.
|
||||||
|
|
||||||
|
We remove the original `stage3` completely and create a new, empty `stage3`:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`rm -rf stage3 && mkdir stage3`
|
||||||
|
```
|
||||||
|
|
||||||
|
Inside `stage3`, we create a substage for installing cockpit:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`mkdir stage3/00-cockpit`
|
||||||
|
```
|
||||||
|
|
||||||
|
To install cockpit on the image, we simply need to add it to the package list:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`echo "cockpit" >> stage3/00-cockpit/00-packages`
|
||||||
|
```
|
||||||
|
|
||||||
|
We also want to configure our new `stage3` to output an image, therefore we simply add this file in the `stage3` directory:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`touch stage3/EXPORT_IMAGE`
|
||||||
|
```
|
||||||
|
|
||||||
|
As there are already intermediate images from the previous build process, we can prevent that the stages are built again by adding `skip-files` in the related directories:
|
||||||
|
|
||||||
|
Skip the build process for `stage0` and `stage1`:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`touch stage0/SKIP && touch stage1/SKIP`
|
||||||
|
```
|
||||||
|
|
||||||
|
Skip the build process for `stage2` and also skip the image creation:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`touch stage2/SKIP && touch stage2/SKIP_IMAGE`
|
||||||
|
```
|
||||||
|
|
||||||
|
Now run the build script again:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`./build.sh`
|
||||||
|
```
|
||||||
|
|
||||||
|
In the folder `deployment` you now should find a zipped image `<date>-Cockpit-lite.zip`, which is ready for deployment.
|
||||||
|
|
||||||
|
#### Troubleshooting
|
||||||
|
|
||||||
|
If you try to apply more complex modifications, there is a lot of trial and error involved in building your own Raspberry Pi image with pi-gen. You will certainly face that the build process will stop in between for some reason. As there is no exception handling in the build process, we do have some cleanup manually in case the process stopped.
|
||||||
|
|
||||||
|
It is likely that the `chroot` file system is still mounted after the process stopped. You won't be able to start a new build process without unmounting it. In the case it is still mounted, unmount it manually by typing:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`umount work/<Build-date-&-image-name>/tmpimage/`
|
||||||
|
```
|
||||||
|
|
||||||
|
Another issue I determined was that the script stopped when the `chroot` filesystem was about to be unmounted. In the file `scripts/qcow2_handling`, you can see that directly before the attempt to unmount `sync` is called. `Sync` forces the system to flush the write buffer. Running the build system as a virtual machine, the write process was not ready when `unmount` was called so the script stopped here.
|
||||||
|
|
||||||
|
To solve this, I just inserted a `sleep` between `sync` and `unmount` which solved the issue:
|
||||||
|
|
||||||
|
![Sleep in between sync and unmount - core dump example][8]
|
||||||
|
|
||||||
|
(I know that 30 seconds are overkill but as the whole build process takes > 20 minutes, 30 seconds are just a drop in the ocean)
|
||||||
|
|
||||||
|
### Modify existing image
|
||||||
|
|
||||||
|
In contrast to building an image with `pi-gen`, you could also directly apply the modification on a running Raspberry Pi OS. In our scenario, simply log in and install Cockpit with the following command:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`sudo apt install cockpit`
|
||||||
|
```
|
||||||
|
|
||||||
|
Now shut down your Raspberry Pi, take out the SD card, and connect it to your PC. Check if your system has automatically mounted the partitions on the SD card by typing `lsblk -p`:
|
||||||
|
|
||||||
|
![Using lsblk -p to check mounting partitions][9]
|
||||||
|
|
||||||
|
In the screenshot above, the SD card is the device `/dev/sdc` and the `boot`\- and `rootfs`-partitions were automatically mounted at the mentioned mount points. Before you proceed, unmount them with :
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`umount /dev/sdc1 && umount /dev/sdc2`
|
||||||
|
```
|
||||||
|
|
||||||
|
Now we copy the contents of the SD card to our file system. Make sure you have enough disk space available as the image will have the same size as the SD card. Start the copy process with the following command:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`dd if=/dev/sdc of=~/MyImage.img bs=32M`
|
||||||
|
```
|
||||||
|
|
||||||
|
![Copying image from the SD card][10]
|
||||||
|
|
||||||
|
Once the copy process is finished, we can shrink the image with the [PiShrink][11]. Follow the installation instructions mentioned in the repository which are:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
wget <https://raw.githubusercontent.com/Drewsif/PiShrink/master/pishrink.sh>
|
||||||
|
chmod +x pishrink.sh
|
||||||
|
sudo mv pishrink.sh /usr/local/bin
|
||||||
|
```
|
||||||
|
|
||||||
|
Now invoke the script by typing:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`sudo pishrink.sh ~/MyImage.img`
|
||||||
|
```
|
||||||
|
|
||||||
|
![Invoking the pishrink.sh script][12]
|
||||||
|
|
||||||
|
PiShrink reduced the image size by almost a factor of ten: From the former 30GB to 3.5GB. You can still optimize the size by zipping it before you upload or share it.
|
||||||
|
|
||||||
|
That's it, you are now able to share and flash this image.
|
||||||
|
|
||||||
|
### Flashing the image
|
||||||
|
|
||||||
|
If you want to flash your own custom Raspberry Pi image back to the SD card using Linux, follow the steps below.
|
||||||
|
|
||||||
|
Put the SD card into your PC. Your system will likely automatically mount the filesystem on the SD card if there is already a previous installation. You can check this by opening a command line and typing `lsblk -p`:
|
||||||
|
|
||||||
|
![Checking automatic mounting with lsblk -p][13]
|
||||||
|
|
||||||
|
As you can see in the screenshot above, my system automatically mounted two filesystems, `boot` and `rootfs` as this SD card already contained a Raspberry Pi OS. Before we start flashing the SD card we have to unmount the file systems first by typing:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`umount /dev/sdc1 && umount /dev/sdc2`
|
||||||
|
```
|
||||||
|
|
||||||
|
The output of `lsblk -p` should look like this in order to proceed:
|
||||||
|
|
||||||
|
![Output of lsblk -p][14]
|
||||||
|
|
||||||
|
Now you can flash the image to the SD card: Open a command line and type:
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
`dd if=/path/to/image.img of=/dev/sdc bs=32M, conv=fsync`
|
||||||
|
```
|
||||||
|
|
||||||
|
With `bs=32M`, you specify that the SD card is written in 32-megabyte blocks, `conv=fsync` forces the process to physically write each block.
|
||||||
|
|
||||||
|
If successful, you should see this output:
|
||||||
|
|
||||||
|
![Successful output example][15]
|
||||||
|
|
||||||
|
Done! You can now put the SD card back into the Raspberry Pi and boot it.
|
||||||
|
|
||||||
|
### Summary
|
||||||
|
|
||||||
|
Both of the techniques presented in this article have their advantages and disadvantages. Whereas using `pi-gen` to create your own custom Raspberry Pi images is more error-prone than simply modifying an existing image, it is the method of choice if you plan to set up a [CICD pipeline][16]. My personal favorite is clearly to modify an existing image as you are directly able to make sure that the changes you applied are working.
|
||||||
|
|
||||||
|
--------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
via: https://opensource.com/article/21/7/custom-raspberry-pi-image
|
||||||
|
|
||||||
|
作者：[Stephan Avenwedde][a]
|
||||||
|
选题：[lujun9972][b]
|
||||||
|
译者：[译者ID](https://github.com/译者ID)
|
||||||
|
校对：[校对者ID](https://github.com/校对者ID)
|
||||||
|
|
||||||
|
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出
|
||||||
|
|
||||||
|
[a]: https://opensource.com/users/hansic99
|
||||||
|
[b]: https://github.com/lujun9972
|
||||||
|
[1]: https://opensource.com/sites/default/files/styles/image-full-size/public/lead-images/raspberrypi_board_vector_red.png?itok=yaqYjYqI (Vector, generic Raspberry Pi board)
|
||||||
|
[2]: https://opensource.com/users/alanfdoss
|
||||||
|
[3]: https://opensource.com/article/21/5/raspberry-pi-cockpit
|
||||||
|
[4]: https://github.com/RPi-Distro/pi-gen
|
||||||
|
[5]: https://opensource.com/article/21/6/try-linux-virtualbox
|
||||||
|
[6]: https://github.com/RPi-Distro/pi-gen/blob/master/README.md#Dependencies
|
||||||
|
[7]: https://man7.org/linux/man-pages/man1/quilt.1.html
|
||||||
|
[8]: https://opensource.com/sites/default/files/uploads/1_pi_gen_sleep.png (Sleep in between sync and unmount - core dump example)
|
||||||
|
[9]: https://opensource.com/sites/default/files/uploads/pi_gen_lsblk_mounted.png (Using lsblk -p to check mounting partitions)
|
||||||
|
[10]: https://opensource.com/sites/default/files/uploads/rpi_image_copy.png (Copying image from the SD card)
|
||||||
|
[11]: https://github.com/Drewsif/PiShrink
|
||||||
|
[12]: https://opensource.com/sites/default/files/uploads/rpi_pishrink.png (Invoking the pishrink.sh script)
|
||||||
|
[13]: https://opensource.com/sites/default/files/uploads/pi_gen_lsblk_mounted_0.png (Checking automatic mounting with lsblk -p)
|
||||||
|
[14]: https://opensource.com/sites/default/files/uploads/pi_gen_lsblk_unmounted2.png (Output of lsblk -p)
|
||||||
|
[15]: https://opensource.com/sites/default/files/uploads/pi_gen_flash.png (Successful output example)
|
||||||
|
[16]: https://en.wikipedia.org/wiki/CI/CD
|
||||||
Loading…
Reference in New Issue
Block a user