Merge pull request #5136 from geekpi/master

translated
This commit is contained in:
geekpi 2017-02-14 10:55:14 +08:00 committed by GitHub
commit 8fb153858e

View File

@ -1,90 +1,93 @@
### How to reset the root password in RHEL7/CentOS7/Scientific Linux 7- based systems
### 如何重置基于 RHEL7/CentOS7/Scientific Linux 7 系统的密码
Contents
内容
* * [1. Objective][9]
* [2. Requirements][10]
* [3. Difficulty][11]
* [4. Instructions][12]
* [4.1. Boot into the minimal mode][1]
* [4.2. Interrupt the boot process][2]
* [4.3. Remount the system so that it can read and write][3]
* [4.4. Make /sysroot your root][4]
* [4.5. Change the root password][5]
* [4.6. Load SELinux policy][6]
* [4.7. Set context type on /etc/shadow file][7]
* [4.8. Exit & reboot][8]
* * [1. 目的][9]
* [2. 要求][10]
* [3. 难易度][11]
* [4. 指导][12]
* [4.1. 启动进入最小模式][1]
* [4.2. 中断启动进程][2]
* [4.3. 重新挂载可以读写的系统][3]
* [4.4. 使 /sysroot 成为根目录][4]
* [4.5. 修改 root 密码][5]
* [4.6. 加载 SELinux 策略][6]
* [4.7. 在 /etc/shadow 中设置上下文类型][7]
* [4.8. 退出并重启][8]
### Objective
### 目的
Resetting the root password in RHEL7/CentOS7/Scientific Linux 7
在 RHEL7/CentOS7/Scientific Linux 7 中重设 root 密码。
### Requirements
### 要求
RHEL7 / CentOS7 / Scientific Linux 7
### Difficulty
### 难易度
MODERATE
中等
### Instructions
### 指导
Things have changed in the RHEL7 world and so has the preferred way of resetting the root password. Although the old way of interrupting the boot process (init=/bin/bash) still works, it is no longer bulletproof and recommended. 'Systemd' uses 'rd.break' to interrupt the boot. Let's have a quick walk through the whole procedure. 
RHEL7 的世界发生了变化,重置 root 密码的方式也一样。虽然中断引导过程init=/bin/bash的旧方法仍然有效但它不再是推荐的。“Systemd” 使用 “rd.break” 来中断引导。让我们快速浏览下整个过程。 
### Boot into the minimal mode
### 启动进入最小模式
Reboot the system and press `e` while being on the kernel list page, before the autoboot starts the system automatically. You get into the edit mode.
重启系统并在内核列表页面在系统启动之前按下 `e`。你会进入编辑模式。
### Interrupt the boot process
### 中断启动进程
In the kernel string - at the end of the line starting `linux 16 /vmlinuz- ect` type `rd.break`. Then Ctrl+X to reboot. The system boots into the initial ram drive and it's mounted on /sysroot In this mode you are not required to type the password.
在内核字符串中 - 在以 “linux 16 /vmlinuz- ect” 结尾的行中输入 “rd.break”。接着 Ctrl+X 重启。系统启动进入初始化内存磁盘,并挂载在 /sysroot。在此模式中你不需要输入密码。
### Remount the system so that it can read and write
### 重新挂载可以读写的系统
```
switch_root:/# mount -o remount,rw /sysroot/
```
### Make /sysroot your root
### 使 /sysroot 成为根目录
```
switch_root:/# chroot /sysroot
```
The command line will change slightly.
命令行会稍微改变。
### Change the root password
### 修改 root 密码
```
sh-4.2# passwd
```
### Load SELinux policy
### 加载 SELinux 策略
```
sh-4.2# load_policy -i
```
### Set context type on /etc/shadow file
###  在 /etc/shadow 中设置上下文类型
```
sh-4.2# chcon -t shadow_t /etc/shadow
```
Note: You could bypass the last 2 steps by creating an autorelabel file instead, but autorelabeling might take a long time.
注意:你可以通过创建 autorelabel 文件略过最后两步,但是 autorelabel 会花费很长时间。
```
sh-4.2# touch /.autorelabel
```
For that reason, and despite it is easier, it should be regarded as the 'lazy option', and is not recommended.
### Exit & reboot
因为这个原因,尽管它更简单,它应该作为“懒人选择”,而不是建议。
Exit & reboot and log in with your new root password.
### 退出并重启
退出并重启并用新的 root 密码登录。
--------------------------------------------------------------------------------
via: https://linuxconfig.org/how-to-reset-the-root-password-in-rhel7-centos7-scientific-linux-7-based-systems
作者:[Rado Folwarczny][a]
译者:[译者ID](https://github.com/译者ID)
译者:[geekpi](https://github.com/geekpi)
校对:[校对者ID](https://github.com/校对者ID)
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译,[Linux中国](https://linux.cn/) 荣誉推出