mirror of
https://github.com/LCTT/TranslateProject.git
synced 2024-12-23 21:20:42 +08:00
translated
This commit is contained in:
geekpi
parent
f5623b3207
commit
7f760e2aac
@ -7,32 +7,32 @@
|
||||
[#]: via: (https://www.2daygeek.com/linux-remove-delete-physical-volume-pv-from-volume-group-vg-in-lvm/)
|
||||
[#]: author: (Magesh Maruthamuthu https://www.2daygeek.com/author/magesh/)
|
||||
|
||||
How to Remove Physical Volume from a Volume Group in LVM
|
||||
如何从 LVM 的卷组中删除物理卷？
|
||||
======
|
||||
|
||||
If a device is no longer need for use by LVM, you can use the vgreduce command to remove physical volumes from a volume group.
|
||||
如果 LVM 不再需要使用某个设备，你可以使用 vgreduce 命令从卷组中删除物理卷。
|
||||
|
||||
The Vgreduce command shrinks the capacity of a volume group by removing a physical volume.
|
||||
vgreduce 命令通过删除物理卷来缩小卷组的容量。
|
||||
|
||||
But make sure that the physical volume is not used by any logical volumes using the pvdisplay command.
|
||||
但要确保物理卷没有被任何逻辑卷使用，请使用 pvdisplay 命令。
|
||||
|
||||
If the physical volume is still being used, you must transfer the data to another physical volume using the pvmove command.
|
||||
如果物理卷仍在使用，你必须使用 pvmove 命令将数据转移到另一个物理卷。
|
||||
|
||||
Once the data is moved, it can be removed from the volume group.
|
||||
数据转移后，它就可以从卷组中删除。
|
||||
|
||||
Finally use the pvremove command to remove the LVM label and LVM metadata on the empty physical volume.
|
||||
最后使用 pvremove 命令删除空物理卷上的 LVM 标签和 LVM 元数据。
|
||||
|
||||
* **Part-1: [How to Create/Configure LVM (Logical Volume Management) in Linux][1]**
|
||||
* **Part-2: [How to Extend/Increase LVM’s (Logical Volume Resize) in Linux][2]**
|
||||
* **Part-3: [How to Reduce/Shrink LVM’s (Logical Volume Resize) in Linux][3]**
|
||||
* **第一部分：[如何在 Linux 中创建/配置 LVM（逻辑卷管理）][1]**。
|
||||
* **第二部分：[如何在 Linux 中扩展/增加 LVM 大小（逻辑卷调整）][2]**。
|
||||
* **第三部分：[如何在 Linux 中减少/缩小 LVM 大小（逻辑卷调整）][3]**。
|
||||
|
||||
|
||||
|
||||
![][4]
|
||||
|
||||
### 1) Moving Extents to Existing Physical Volumes
|
||||
### 1) 将扩展移动到现有物理卷上
|
||||
|
||||
Use the pvs command to check if the desired physical volume (we plan to remove the **“/dev/sdb1”** disk in LVM) is used or not.
|
||||
使用 pvs 命令检查是否使用了所需的物理卷（我们计划删除 LVM 中的 **“/dev/sdb1”** 磁盘）。
|
||||
|
||||
```
|
||||
# pvs -o+pv_used
|
||||
@ -43,9 +43,9 @@ PV VG Fmt Attr PSize PFree Used
|
||||
/dev/sdc1 myvg lvm2 a- 17.15G 12.15G 5.00G
|
||||
```
|
||||
|
||||
If this is used, check to see if there are enough free extents on the other physics volumes in the volume group.
|
||||
如果使用了，请检查卷组中的其他物理卷是否有足够的空闲空间。
|
||||
|
||||
If so, you can run the pvmove command on the device you want to remove. Extents will be distributed to other devices.
|
||||
如果有的话，你可以在需要删除的设备上运行 pvmove 命令。扩展将被分配到其他设备上。
|
||||
|
||||
```
|
||||
# pvmove /dev/sdb1
|
||||
@ -57,7 +57,7 @@ If so, you can run the pvmove command on the device you want to remove. Extents
|
||||
/dev/sdb1: Moved: 100.0%
|
||||
```
|
||||
|
||||
When the pvmove command is complete. Re-use the pvs command to check whether the physics volume is free or not.
|
||||
当 pvmove 命令完成后。再次使用 pvs 命令检查物理卷是否有空闲。
|
||||
|
||||
```
|
||||
# pvs -o+pv_used
|
||||
@ -68,25 +68,25 @@ PV VG Fmt Attr PSize PFree Used
|
||||
/dev/sdc1 myvg lvm2 a- 17.15G 12.15G 5.00G
|
||||
```
|
||||
|
||||
If it’s free, use the vgreduce command to remove the physical volume /dev/sdb1 from the volume group.
|
||||
如果它是空闲的，使用 vgreduce 命令从卷组中删除物理卷 /dev/sdb1。
|
||||
|
||||
```
|
||||
# vgreduce myvg /dev/sdb1
|
||||
Removed "/dev/sdb1" from volume group "myvg"
|
||||
```
|
||||
|
||||
Finally, run the pvremove command to remove the disk from the LVM configuration. Now, the disk is completely removed from the LVM and can be used for other purposes.
|
||||
最后，运行 pvremove 命令从 LVM 配置中删除磁盘。现在，磁盘已经完全从 LVM 中移除，可以用于其他用途。
|
||||
|
||||
```
|
||||
# pvremove /dev/sdb1
|
||||
Labels on physical volume "/dev/sdb1" successfully wiped.
|
||||
```
|
||||
|
||||
### 2) Moving Extents to a New Disk
|
||||
### 2) 移动扩展到新磁盘
|
||||
|
||||
If you don’t have enough free extents on the other physics volumes in the volume group. Add new physical volume using the steps below.
|
||||
如果你在卷组中的其他物理卷上没有足够的可用扩展。使用以下步骤添加新的物理卷。
|
||||
|
||||
Request new LUNs from the storage team. Once this is allocated, run the following commands to **[discover newly added LUNs or disks in Linux][5]**.
|
||||
向存储组申请新的 LUN。分配完毕后，运行以下命令来**[在 Linux 中发现新添加的 LUN 或磁盘][5]**。
|
||||
|
||||
```
|
||||
# ls /sys/class/scsi_host
|
||||
@ -101,21 +101,21 @@ host0
|
||||
# fdisk -l
|
||||
```
|
||||
|
||||
Once the disk is detected in the OS, use the pvcreate command to create the physical volume.
|
||||
操作系统中检测到磁盘后，使用 pvcreate 命令创建物理卷。
|
||||
|
||||
```
|
||||
# pvcreate /dev/sdd1
|
||||
Physical volume "/dev/sdd1" successfully created
|
||||
```
|
||||
|
||||
Use the following command to add new physical volume /dev/sdd1 to the existing volume group vg01.
|
||||
使用以下命令将新的物理卷 /dev/sdd1 添加到现有卷组 vg01 中。
|
||||
|
||||
```
|
||||
# vgextend vg01 /dev/sdd1
|
||||
Volume group "vg01" successfully extended
|
||||
```
|
||||
|
||||
Now, use the pvs command to see the new disk **“/dev/sdd1”** that you have added.
|
||||
现在，使用 pvs 命令查看你添加的新磁盘 **“/dev/sdd1”**。
|
||||
|
||||
```
|
||||
# pvs -o+pv_used
|
||||
@ -127,7 +127,7 @@ PV VG Fmt Attr PSize PFree Used
|
||||
/dev/sdd1 myvg lvm2 a- 60.00G 60.00G 0
|
||||
```
|
||||
|
||||
Use the pvmove command to move the data from /dev/sdb1 to /dev/sdd1.
|
||||
使用 pvmove 命令将数据从 /dev/sdb1 移动到 /dev/sdd1。
|
||||
|
||||
```
|
||||
# pvmove /dev/sdb1 /dev/sdd1
|
||||
@ -139,7 +139,7 @@ Use the pvmove command to move the data from /dev/sdb1 to /dev/sdd1.
|
||||
/dev/sdb1: Moved: 100.0%
|
||||
```
|
||||
|
||||
After the data is moved to the new disk. Re-use the pvs command to check whether the physics volume is free.
|
||||
数据移动到新磁盘后。再次使用 pvs 命令检查物理卷是否空闲。
|
||||
|
||||
```
|
||||
# pvs -o+pv_used
|
||||
@ -151,14 +151,14 @@ PV VG Fmt Attr PSize PFree Used
|
||||
/dev/sdd1 myvg lvm2 a- 60.00G 10.00G 50.00G
|
||||
```
|
||||
|
||||
If it’s free, use the vgreduce command to remove the physical volume /dev/sdb1 from the volume group.
|
||||
如果空闲，使用 vgreduce 命令从卷组中删除物理卷 /dev/sdb1。
|
||||
|
||||
```
|
||||
# vgreduce myvg /dev/sdb1
|
||||
Removed "/dev/sdb1" from volume group "myvg"
|
||||
```
|
||||
|
||||
Finally, run the pvremove command to remove the disk from the LVM configuration. Now, the disk is completely removed from the LVM and can be used for other purposes.
|
||||
最后，运行 pvremove 命令从 LVM 配置中删除磁盘。现在，磁盘已经完全从 LVM 中移除，可以用于其他用途。
|
||||
|
||||
```
|
||||
# pvremove /dev/sdb1
|
||||
@ -171,7 +171,7 @@ via: https://www.2daygeek.com/linux-remove-delete-physical-volume-pv-from-volume
|
||||
|
||||
作者：[Magesh Maruthamuthu][a]
|
||||
选题：[lujun9972][b]
|
||||
译者：[译者ID](https://github.com/译者ID)
|
||||
译者：[geekpi](https://github.com/geekpi)
|
||||
校对：[校对者ID](https://github.com/校对者ID)
|
||||
|
||||
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译，[Linux中国](https://linux.cn/) 荣誉推出
|
||||
Loading…
Reference in New Issue
Block a user