选题: How to configure wireless wake-on-lan for Linux WiFi card

This commit is contained in:
darksun 2017-12-14 16:19:24 +08:00
parent 9f296c4e42
commit 26577eb94d

View File

@ -0,0 +1,107 @@
translating by lujun9972
How to configure wireless wake-on-lan for Linux WiFi card
======
[![linux-configire-wake-on-wireless-lan-wowlan][1]][1]
Wake on Wireless (WoWLAN or WoW) is a feature to allow the Linux system to go into a low-power state while the wireless NIC remains active and stay connected to an AP. This quick tutorial shows how to enable WoWLAN or WoW (wireless wake-on-lan) mode with a wifi card installed in a Linux based laptop or desktop computer.
Please note that not all WiFi cards or Linux drivers support the WoWLAN feature.
## Syntax
You need to use the iw command to see or manipulate wireless devices and their configuration on a Linux based system. The syntax is:
```
iw command
iw [options] command
```
## List all wireless devices and their capabilities
Type the following command:
```
$ iw list
$ iw list | more
$ iw dev`
```
Sample outputs:
```
phy#0
Interface wlp3s0
ifindex 3
wdev 0x1
addr 6c:88:14:ff:36:d0
type managed
channel 149 (5745 MHz), width: 40 MHz, center1: 5755 MHz
txpower 15.00 dBm
```
Please note down phy0.
## Find out the current status of your wowlan
Open the terminal app and type the following command to tind out wowlan status:
`$ iw phy0 wowlan show`
Sample outputs:
`WoWLAN is disabled`
## How to enable wowlan
The syntax is:
`sudo iw phy {phyname} wowlan enable {option}`
Where,
1. {phyname} - Use iw dev to get phy name.
2. {option} - Can be any, disconnect, magic-packet and so on.
For example, I am going to enable wowlan for phy0:
`$ sudo iw phy0 wowlan enable any`
OR
`$ sudo iw phy0 wowlan enable magic-packet disconnect`
Verify it:
`$ iw phy0 wowlan show`
Sample outputs:
```
WoWLAN is enabled:
* wake up on disconnect
* wake up on magic packet
```
## Test it
Put your laptop in suspend or sleep mode and send ping request or magic packet from your nas server:
`$ sudo sh -c 'echo mem > /sys/power/state'`
Send ping request from your nas server using the [ping command][3]
`$ ping your-laptop-ip`
OR [send magic packet using wakeonlan command][4] :
`$ wakeonlan laptop-mac-address-here
$ etherwake MAC-Address-Here`
## How do I disable WoWLAN?
The syntax is:
`$ sudo phy {phyname} wowlan disable
$ sudo phy0 wowlan disable`
For more info read the iw command man page:
`$ man iw
$ iw --help`
--------------------------------------------------------------------------------
via: https://www.cyberciti.biz/faq/configure-wireless-wake-on-lan-for-linux-wifi-wowlan-card/
作者:[Vivek Gite][a]
译者:[lujun9972](https://github.com/lujun9972)
校对:[校对者ID](https://github.com/校对者ID)
本文由 [LCTT](https://github.com/LCTT/TranslateProject) 原创编译,[Linux中国](https://linux.cn/) 荣誉推出
[a]:https://twitter.com/nixcraft
[1] https://www.cyberciti.biz/media/new/faq/2017/12/linux-configire-wake-on-wireless-lan-wowlan.jpg
[2] https://www.cyberciti.biz/tips/linux-send-wake-on-lan-wol-magic-packets.html
[3] //www.cyberciti.biz/faq/unix-ping-command-examples/ (See Linux/Unix ping command examples for more info)
[4] https://www.cyberciti.biz/faq/apple-os-x-wake-on-lancommand-line-utility/